メインコンテンツに移動

特長

  • High ESD protection on RS-485 I/O pins
  • ISL3179E: ±16.5kV IEC61000
  • ISL3180E: ±12kV HBM
  • Class 3 HBM level on all other pins (ISL3179E): >9kV
  • Specified for +125°C operation
  • High data rates: up to 40Mbps
  • 5V tolerant logic inputs
  • 1/5 unit load allows up to 160 devices on the bus
  • Full fail-safe (open, shorted, terminated/undriven) receiver
  • Hot plug - Tx and Rx outputs remain three-state during power-up
  • Low quiescent current: 4mA (max)
  • Low current shutdown mode: 1μA (max)
  • -7V to +12V common-mode input voltage range
  • Three-state Rx and Tx outputs
  • 16/16.5ns (max) Tx/Rx propagation delays; 1.5ns (max) skew
  • Operates from a single +3.3V supply (10% tolerance)
  • Current limiting and thermal shutdown for driver overload protection
  • Pb-free (RoHS compliant)

説明

The ISL3179E and ISL3180E are high ESD protected, 3. 3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each device has low bus currents (+220μA/-150μA), so they present a “1/5 unit load” to the RS-485 bus. This allows up to 160 transceivers on the network without violating the RS-485 specification’s 32 unit load maximum, and without using repeaters. Receiver (Rx) inputs feature a “full fail-safe” design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or terminated but undriven. The ISL3180E is configured for full duplex applications. The ISL3179E half duplex version multiplexes the Rx inputs and Tx outputs to allow a transceiver with an output disable function in 8 Ld packages. Hot plug circuitry ensures that the Tx and Rx outputs remain in a high impedance state while the power supply stabilizes.

パラメータ

属性
Transmitters (#) 1
Receivers (#) 1
Devices Allowed on Bus 160
Half/Full Duplex Half
Supply Voltage Vcc Range 3-3.6
High ESD Protection Yes-IEC61000
Hot Plug Yes
Data Rate (Mbps) 40
Slew Rate Limited No
Tx/Rx Enable Yes
IS Enabled/Disabled 2600/2600 µA
SHDN ICC <1 μA
VL Pin No
Advanced Features High Speed

パッケージオプション

Pkg. Type Pkg. Dimensions (mm) Lead Count (#) Pitch (mm)
DFN 3.0 x 3.0 x 0.90 10 0.5
MSOP 3.0 x 3.0 x 0.00 8 0.7
SOICN 4.9 x 3.9 x 0.00 8 1.3

アプリケーション・ブロック図

Interactive block diagram of the low-power servo design features a flash-based MCU and allows to drive up to 75W motors with precise control.
小型BLDCモータサーボ
BLDCモータサーボは、正確で効率的な統合制御により、最大75Wのモータを駆動します。
Smart 3-Ph E-Meter Block Diagram
スマート三相電力メータ
最新のグリッドのための双方向通信と改ざん検出を備えたスマート三相電子メータ。
Interactive block diagram of this flexible metering system features ultra-low power metrology MCUs, UART with optical isolation, and Sub-1 GHz MCU.
スマート単相電力メータ
有線および無線通信、改ざん検出、および分離サポートを備えた柔軟なエネルギ計測システム。
Cloud Gateway Module Block Diagram
クラウドゲートウェイモジュール
クラウドゲートウェイモジュールは、安全なデータ転送、安定な通信、柔軟な電源互換性を可能にします。
Tankless Gas Water Heater with Remote Control Block Diagram
遠隔操作が可能なタンクレスガス給湯器
リモコン、コンパクトな2チップMCU設計、正確な温度制御を備えたタンクレスガス給湯器。
RTOS Robot Controller with High-Speed Image Processing Block Diagram
高速画像処理付きRTOSロボットコントローラ
RTOSロボットコントローラは、高度なロボットアプリケーションのための高速画像処理でAIを強化します。

その他アプリケーション

  • Motor Controller/Position Encoder Systems
  • Factory Automation
  • Field Bus Networks
  • Security Networks
  • Building Environmental Control Systems
  • Industrial/Process Control Networks

適用されたフィルター