Features
- < 100mW core power (at 3.3V)
- < 0.5ps RMS phase jitter (typical)
- Meets PCIe® Gen 1–4, USB 3.0, 1/10 GbE clock requirements
- Supports both crystal (8MHz – 40MHz) and external clock input (1MHz – 350MHz)
- 4 universal output pairs: LVPECL, LVDS, HCSL, or 8 LVCMOS outputs
- 4 independent frequencies with 0.001MHz – 350MHz output range
- Reference output
- 1.8V/2.5V/3.3V core and output voltages
- 2 programmable I²C addresses allowing multiple devices to be used in the same system
- Up to 4 different configuration sets in OTP non-volatile memory
- Supported by the Renesas IC Toolbox (RICBox) software tool
- Quick sampling and customization process supported by online form submission
- 4mm x 4mm 24-VFQFPN wettable flank package
- AEC-Q100 qualified
- -40°C to +105°C operating temperature range
Description
The 5P49V60 is a member of Renesas' VersaClock® 6E programmable clock generator family. The 5P49V60 is intended for automotive applications such as infotainment, dashboard, video processing, and in-vehicle networking, as well as applications based on PCI-Express or USB 3.0. The reference clock can come from one of the two redundant clock inputs. A glitchless manual switchover function allows one of the redundant clocks to be selected during normal operation.
Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using the I²C interface.
Parameters
| Attributes | Value |
|---|---|
| App Jitter Compliance | PCIe Gen1, PCIe Gen2, PCIe Gen3, PCIe Gen4, PCIe Gen5 |
| Outputs (#) | 5 |
| Output Type | LVCMOS, LVPECL, HCSL, LVDS |
| Output Freq Range (MHz) | 1 - 350 |
| Input Freq (MHz) | 1 - 350 |
| Inputs (#) | 2 |
| Input Type | Crystal, LVCMOS, LVPECL, LVDS, HCSL |
| Output Banks (#) | 4 |
| Core Voltage (V) | 1.8V, 2.5V, 3.3V |
| Output Voltage (V) | 1.8V, 2.5V, 3.3V |
| Product Category | VersaClock 6E, Low Jitter Clocks (<700 fs RMS), Automotive Timing, General Purpose Clocks, Programmable Clocks |
| Selection Criteria | <700 fs RM |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| VFQFPN | 4.0 x 4.0 x 0.9 | 24 | 0.5 |
Application Block Diagrams
 | Cost-Effective Digital Cluster with 4-channel AHL and Surround View Digital clusters boost safety by centralizing info and reducing costs with AHL and efficient PMICs. |
 | Connected Android-Based Vehicle Instrument Cluster Android-based automotive cockpit with wireless connectivity and real-time displays. |
 | Communication Gateway & Integrated DVR/DMS System Integrated automotive gateway merging CoGW with DVR/DMS video processing. |
 | Automotive Cockpit System with Haptics Advanced cockpit system with next-generation haptics, BroadLED driver, and PMIC. |
 | Tire Pressure Monitoring System Low-power Bluetooth LE TPMS design with integrated PMIC for cost, size, and development time reduction. |
 | Parking Assistance System with AHL Camera Automotive parking camera system with HD analog link cuts cabling cost and maintains zero latency. |
 | Connected Gateway for Future E/E Architecture Renesas enables advanced E/E vehicle architecture with R-Car SoC, MCU, real-time tasks, and connectivity support. |
 | ADAS Front Camera System Scalable ADAS front camera system with NCAP-ready features and high-efficiency deep learning performance. |
 | High-End Cockpit & Infotainment Solution |
Complete Your Design
Explore complementary products to elevate your design
Renesas Boards & Kits
Evaluation Board for 5P49V60 Automotive VersaClock 6E
This is the evaluation board for the 5P49V60 automotive VersaClock® 6E programmable clock generator. With RMS phase jitter of less than 0.5ps over the full 12kHz to 20MHz integration range, the device meets the stringent jitter requirements of PCI Express® Gen 1–3, USB 3.0, and 1G/10G Ethernet.
R-Car V4H System Evaluation Board Set/White Hawk
The White Hawk is an R-Car V4H-specific evaluation board set that can be used to evaluate systems using the R-Car V4H and to develop operating systems, device drivers, and applications. Using the White Hawk board set allows the developers to efficiently conduct required tasks such as evaluation... Read More
High-End Cockpit & Infotainment Solution R-Car H3, M3 Development Board / Salvator-XS
The combination of R-Car (H3/M3/M3N) system in package (SiP) and Clock Generators delivers high efficiency while supporting a wide range of display outputs and high-quality performance, making it ideal for scalable cockpit and infotainment solutions.
Test This Board Remotely
Support Communities
-
5P49V60 OUT0 dropout and OTP Programming
In my design, I'm using a 19.2MHz crystal and outputting a variety of clocks at 1.8V. I don't have a lot of choice of the 19.2MHz--it's required by the CPU I'm clocking on OUT0. A 19.2MHz crystal requires reprogramming the feedback ...
Nov 19, 2023 -
5P49V60 always giving 80MHz when powered on
Hi everyone, I've been trying to use the 5P49V60 module to generate clock signal. I am able to generate the clock, however, when I power it on, I am always getting 80MHz initially. This is undesirable in my case and I really want to remove this. Any help/ ...
Dec 25, 2022 -
5P49V60 with IDT Timing commander wrong output frequency
I have 5P49V60 (on Sparkfun module). I've downloaded and installed IDT timing commander (v 1.17), downloaded "VersaClock 6E Timing Commander Personality File v1.4.1". Sparkfun module have 16MHz XTAL on board. I've configured IDT Timing Commander (further on IDT) to:- generate 64MHz on output 4- generate ...
Nov 23, 2022
Support Communities
