Features
- In-System-Debug Feature
- Multiple-Time Programmable Memory In Development
- Wide Range Power Supply
- 2.5V (±8%) to 5V (±10%) VDD
- 1.8V (±5%) to 5V (±10%) VDD2 (VDD2 ≤ VDD)
- RoHS-Compliant/Halogen-Free
- AEC-Q100 Grade 2
- Macrocells Overview
- Two High-Speed General-Purpose Rail-to-Rail Analog Comparators (ACMPxH)
- Two Low-Power General-Purpose Rail-to-Rail Analog Comparators (ACMPxL)
- Two Voltage References (Vref)
- Two Vref Outputs
- Eleven Combination Function Macrocells
- Three Selectable DFF/Latch or 2-bit LUTs
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Six Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
- Eight Multi-Function Macrocells
- Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters
- One Selectable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter
- Serial Communications: I2C Protocol Interface
- Programmable Delay with Edge Detector Output
- Deglitch Filter with Edge Detector
- Three Oscillators (OSC)
- 2.048kHz Oscillator
- 2.048MHz Oscillator
- 25MHz Oscillator
- Analog Temperature Sensor
- Power-On Reset (POR)
Description
The SLG46827-A automotive programmable mixed-signal matrix IC with in-system programmability provides a small, low-power component for commonly used mixed-signal functions. The user creates the circuit design by programming the multiple-time programmable non-volatile memory (NVM) to configure the interconnect logic, the IOs, and the macrocells of the SLG46826. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power single integrated circuit.
Parameters
| Attributes | Value |
|---|---|
| GPIOs (#) | 17 |
| LUTs (Max) (#) | 19 |
| D Flip-flops (DFFs) (#) | 17 |
| ACMP Channels (#) | 4 |
| CNT/DLY (Max) (#) | 8 |
| # of Programable Delays (#) | 1 |
| Pipe Delay | 16-stage |
| Interface | I2C |
| Nominal VDD | 2.3 - 5.5 |
| Oscillator Type | RC OSC, LF OSC, Ring OSC |
| Temperature Sensor (ch) (#) | 1 |
| Automotive Rating | AEC-Q100 (Grade 2) |
| Temp. Range (°C) | -40 to +105°C |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| TSSOP | 6.5 x 6.4 | 20 | 0.65 |
Application Block Diagrams
 | TFT Instrument Cluster with Bluetooth Audio and Telematics TFT instrument cluster with integrated telematics, graphics, and AI for cost‑efficient connected mobility. |
 | Electronic Toll with GNSS ETC systems automate toll payments to reduce traffic and eliminate manual toll booth delays. |
 | Video Output Expansion for Surround View & AR HUD Integrated video output and AI for surround view and AR HUD with reduced cost and complexity. |
 | Infotainment & Automated Driving Systems with Fewer Components Automated driving system with configurable ICs for cost-effective integration and flexibility. |
Additional Applications
- In-Vehicle Navigation
- Infotainment
- Advanced Driver Assistance Systems (ADAS)
- Automotive Display Clusters
- Body Electronics
Complete Your Design
Explore complementary products to elevate your design
Renesas Boards & Kits
GreenPAK SLG46827-AG Development Kit with Socket Adapter
The SLG46827AG-SKT GreenPAK™ 65x64 socket adapter kit enables users to configure, program, and test the SLG46827-A automotive GreenPAK programmable mixed-signal matrix using the SLG4DVKADV GreenPAK Advanced Development Board or SLG4DVKLITE GreenPAK Lite Development Board. The SLG46827AG-SKT kit... Read More
GreenPAK Advanced Development Board
The GreenPAK™ Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK programmable mixed-signal devices - for use with SLG46xxxX-SKT/SLG47xxxV-SKT socket kits.
The board works in tandem with the GreenPAK Designer software (built into the Go... Read More
Test This Board Remotely
GreenPAK Lite Development Board
The GreenPAK™ Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in conjunction with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
GreenPAK Serial Debugger Board (GSD)
The GreenPAK™ Serial Debugger (GSD) device can be used for programming GreenPAK programmable mixed-signal matrix IC products with multiple-time non-volatile memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with an I²C interface. This... Read More
Support Communities
-
ISP differences between SLG46826 & SLG46827-A
... However, I see that SLG46827-A is listed as supporting ISP feature in the product page as below: Could you tell me why SLG46827-A is not officially listed as supporting ISP? Because aside from the the automotive grade, I don't see any difference between SLG46826 & SLG46827-A.
Aug 12, 2022 -
how to order programmed SLG46827-A
The link for this does not allow for uploading the design file and does not give the quantity pricing or minimum. Is the minimum 500 or 3000? http://www.silego.com/buy/index.php?main_page=product_info&cPath=67&pro…
Jan 23, 2021 -
VDD2 utility with SLG46827-A?
I'm confused about the usefulness of setting VDD2 to something other than the same as VDD. When I look at the pins in SLG46827-A, and specifically the pins that can use VDD2 per "5.8.1 Matrix OE IO Structure" from the SLG46827-A data sheet, I would ...
Dec 9, 2021
Knowledge Base
-
Q&A for GreenPAK™ Custom Part Order
... the below listed parts: Part Number MOQ SLG46620-AG 4000 SLG46620G 4000 SLG46824G 4000 SLG46826G 4000 SLG46880-AP 4000 SLG46538-AP 5000 SLG46625-AP 5000 SLG46827-AG 5000 SLG46855-AP 5000 SLG46880V 5000 SLG46881V 5000 SLG47004V 5000 Are there any additional fees associated with ordering custom parts with unique part ...
Sep 19, 2023
Support Communities
