Overview
Description
The PM+ (Project Manager) is an integrated development environment platform to efficiently develop the user program for V850 and 78K. A series of operations of developing the user program can be performed by starting up the editor, builder, debugger, and so on from the PM+. Learn More
- Further update of the PM+ is not planned. Please be careful of the operating environment.
- IBM PC/AT compatible
- Windows® 10 (32-bit version only)
- Windows® 8.1 (32-bit version only)
- Windows® 7 (32-bit version only)
- IBM PC/AT compatible
- For details, see Compatibility of Renesas Software Tools with Microsoft Windows®.
Release Information
PM+
- Latest Ver.: V6.32
New Device Files
- Released: Sep 16, 2011
- Details of upgrade (See Tool News)
- Operating Environment
- Tool Suites
- Device Files for PM+ and Supported Devices
- Download device files
- Further update of the PM+ is not planned.
- The PM+ requires a Device file for your target device.
Target Devices
Additional Details
Successor
In the case of CS+ or e² studio, the build speed is improved by the rapid build function compared to PM+.
Porting from PM+ to CS+
Porting from PM+ to the e² studio
Tool Suites
PM+ is not available separately. It is included in the packages below. When installing any package, PM+ will be installed inevitably.
- Software Package for V850 [SP850]
- Software Package for 78K0R [SP78K0R]
- Software Package for 78K0 [SP78K0]
- Software Package for 78K0S [SP78K0S]
- Compiler Package for V850 [CA850]
- Assembler Package for 78K0R [RA78K0R]
- Assembler Package for 78K0 [RA78K0]
- Assembler Package for 78K0S [RA78K0S]
Integrated Tools
| V850 Microcontroller | 78K (78K0R, 78K0, 78K0S) Microcontroller | |
|---|---|---|
| Compiler/Assembler | CA850 | CC78K0R CC78K0 CC78K0S RA78K0R RA78K0 RA78K0S |
| System simulator | SM850 SM+ for V850 SM+ for V850ES/Fx2 SM+ for V850ES/Fx3 SM+ for V850ES/Sx2 SM+ for V850ES/Hx2 | SM+ for 78K0R SM+ for 78K0R/Kx3 SM78K0 SM+ for 78K0 SM+ for 78K0/Kx2 SM78K0S SM+ for 78K0S SM+ for 78K0S/Kx1+ |
| Integrated debugger | ID850 ID850NW ID850NWC ID850QB | ID78K0R-QB ID78K0-NS ID78K0-QB ID78K0S-NS ID78K0S-QB |
| Emulator | IECUBE for V850 MINICUBE2 | IECUBE MINICUBE2 |
| Real-time OS | RX850 RX850 Pro | RX78K0R |
| Device File | A device file of target device to be used | A device file of target device to be used |
| Device Driver Configurator | Applilet2, Applilet3 | Applilet2, Applilet3 |
| Flash Programmer | PG-FP5 PG-FP4 | PG-FP5 PG-FP4 |
| Link Directive Generator | LDG (if necessary) | — |
| Performance analysis tuning tool | TW850 (if necessary) | — |
Support
Support Communities
- S1JA - R_PFS->Pmn Port functions
I am trying to find a way to set the GPIO Port output high or low(1 or 0) with direct bit access, reading the S1JA Manual it seems that you can do this with the following code : R_PFS->P205PFS_b.PODR = 1; // High R_PFS->P205PFS ...
Nov 6, 2019 - RAA215300 - Enabling PMIC’s external crystal clock output
Hi, In our custom RZ/V2L board, RAA215300 PMIC’s external crystal – 32KHz not producing the output. After doing the changes for enabling the external clock (XTOSCB bit in the RTC SR register to 1), we are not getting the crystal output. But in EVK, crystal output is there ...
Mar 27, 2024 - USB-DA14695 WIRA Using low power PM_MODE_EXTENded_sleep mode and modifying broadcast time interval, the system freezes, and then the system reset phenomenon occurs.
Problem Description: 1. The routine code is modified as shown in the following two figures, using pM_MODE_EXTENded_sleep mode and modifying the broadcast time interval to 2000. Symptom Description: 1. In broadcast mode, the system enters hibernation for 10S, but does not wake up again. There is no ...
Mar 8, 2022
Knowledge Base
- RZ/V2L: Is there a PMIC that can be used in combination with the RZ/V2L, RZ/G2L and RZ/G2LC?
We provide a PMIC (RAA215300) with a design optimized for the RZ/V2L. https://www.renesas.com/products/power-power-management/power-management-ics-pmic-and-pmus/raa215300-high-performance-9-channel-pmic-supporting-ddr-memory-built-charger-and-rtc Please also refer ...
Jun 24, 2022 - Why can't I rewrite the PM in PSW to switch from supervisor to user mode?
The PM bit in the PSW cannot be rewritten in supervisor mode. Execute an RTE instruction when the value of the copy of the PM bit in the PSW register that has been preserved on the stack is "1" or an RTFI instruction when the value of the copy of ...
Feb 4, 2026 - Setting Procedure: interrupt controller and peripheral module
To enable interrupt requests, first enable interrupts in the peripheral module, and then enable interrupt requests for the corresponding interrupt request enable bit (IEN) in the interrupt request enable register (IER) in the ICU. To disable interrupts, with exception of cases where interrupts must be disabled in the peripheral module ...
Feb 5, 2026
Support Communities
