Overview
Description
The CK-RA6M5 cloud kit enables users to securely connect to the cloud and explore the features of the Cortex®-M33 based RA6M5 group of MCUs and cloud services. With multiple network connectivity options, the kit provides a seamless cloud connectivity experience to most of the global cloud service providers. The kit is equipped with an onboard ethernet PHY for ethernet connectivity and includes the DA16600 Wi-Fi-Bluetooth® Low Energy combo Pmod™ for wireless connectivity. With the Renesas Flexible Software Package (FSP), the kit has complete software stack support using FreeRTOS, Azure RTOS, and other middleware stacks, thereby making it an ideal platform for efficiently developing cloud solutions and greatly reducing the time-to-market.
Visit Renesas Cloud Solutions for a complete cloud solution package.
Features
- CK-RA6M5 v2 baseboard
- Wi-Fi with US159-DA16600EVZ Pmod
- Ethernet
- USB Full-Speed host and device
- Sensors:
- Humidity and temperature
- Indoor air quality index
- Outdoor air quality index
- Heart rate, blood oxygen saturation (SpO2), respiration rate
- Barometric pressure
- 6 axis motion tracking
- 2 MEMS microphones
- Battery connector for portability
- Arduino™ (Uno R3) connector
- USB Type-C power connector
- Onboard MCU:
- RF7A6M5BH3CFC microcontroller
- 200MHz, Arm® Cortex®-M33 core
- 2MB Code Flash, 512KB SRAM
- 176 pins, LQFP package
- Ecosystem:
- MCU and Pmod current measurement points
- 5V input through USB or external power supply
- USB serial converter
- Debug onboard (SEGGER J-Link)
- 4 user LEDs
- One user button
- 2 Digilent Pmod (SPI/UART/I2C: Type-6A and Type-2A) connectors
Applications
Design & Development
Videos & Training
Watch a short overview of the Renesas CK-RA6M5 and CK-RX-65N certified cellular-to-cloud IoT development kits to see how they can simplify solution prototyping for your next IoT design. Visit renesas.com/cloudsolutions to get started.
Additional Videos
News & Blog Posts
Support
Support Communities
- How to add audio interface to ck-ra6m5
Hi All, Board : CK-RA6M5FSP : 4.1.0 I have two question about CK-RA6M5. I want to record and play audio on CK-RA6M5. Is it possible? 1. It has 2 MEMS Microphones, how can I find example code for audio recording? 2. Can I add an external ...
Dec 12, 2022 - CK_RA6M5 SCI-SPI
Hi, everyone. I am working with kit CK-RA6M5 with ADS1299. I have used to configure via SPI "sci_spi_ek_ra6m5". Try to send ID commnad to ADS1299. It has used "R_SCI_SPI_Write", "R_SCI_SPI_Read" or "R_SCI_SPI_WriteRead". When I were reading data ...
Jun 19, 2023 - CK-RA6M5-v1 Application didn't work after bootloader program jump to application address at power on
Hi everyone, I'm developing a bootloader for kit CK-RA6M5-v1 and use example led blink as an application. I use UART to load binary firmware to application area in flash with readback to make sure firmware is writen to application area. After it finish, bootlader jump to application ...
Jun 7, 2024
Knowledge Base
- RA Family: CK-RA6M5/CK-RX65N is used. I can only read 00h data from the outdoor sensor (ZMOD4510) installed in the same kit. Is it malfunctioning?
The ZMOD4510 (outdoor sensor) in the CK-RA6M5 and CK-RX65N requires a warm-up time. This time varies depending on the operating mode of the sensor.It is 60 minutes when operated in Gen1 mode and 42 hours in Gen2 mode.Also, since this warm-up time is required ...
Jun 9, 2022 - RX Family: CK-RA6M5/CK-RX65N is used. I can only read 00h data from the outdoor sensor (ZMOD4510) installed in the same kit. Is it malfunctioning?
The ZMOD4510 (outdoor sensor) in the CK-RA6M5 and CK-RX65N requires a warm-up time. This time varies depending on the operating mode of the sensor.It is 60 minutes when operated in Gen1 mode and 42 hours in Gen2 mode.Also, since this warm-up time is required ...
Jun 9, 2022
Support Communities
Knowledge Base
