Features
- RXv2 Core 120MHz operation (34 CoreMark/mA), single-precision FPU
- 2.7V to 3.6V operation
- A wide package lineup: 100-pin to 176-pin
- Equipped with various communication interfaces such as Ethernet, USB, CAN, SD host/slave interface, and quad SPI.
- Program Flash up to 2MB, SRAM up to 640KB
- DualBank function convenient for firmware update*1
- HMI
- TFT-LCD controller and 2D drawing engine can reduce CPU load at running of LCD display.*1
Security
- NIST FIPS 140-2 Level 3 CMVP certification*1
- Equipped with Renesas' proprietary hardware secure IP (Trusted Secure IP) that realizes a high level of root-of-trust*1
- Equipped with various encryption engines: AES, TRNG, TDES*1, RSA*1, ECC*1, SHA*1
- Equipped with memory protect functions that protect Flash memory from unintended access to flash
[*1: Only products with 1.5MB or more code flash memory]
NIST: National Institute of Standards and Technology
FIPS: Federal Information Processing Standards
CMVP: Cryptographic Module Validation Program
Description
The Renesas RX65N is a mainstream RX microcontroller with RXv2 core, large-capacity RAM, and enhanced security, connectivity, and human machine interface (HMI) capabilities.
Parameters
| Attributes | Value |
|---|---|
| Main CPU | RXv2 |
| Program Memory (KB) | 512, 768, 1024, 1536, 2048 |
| RAM (KB) | 256, 640 |
| Carrier Type | Full Carton (Tray), Tray |
| Supply Voltage (V) | - |
| I/O Ports | 79, 112, 137 |
| DRAM I/F | No, SDRAM I/F |
| Temp. Range (°C) | Ta = -40 to +85, Ta = -40 to +105 |
| Operating Freq (Max) (MHz) | 120 |
| Ethernet speed | 10M/100M |
| Ethernet (ch) | 1 |
| EtherCat (ch) (#) | 0 |
| USB FS (host ch/device ch) | ( 1 / 1 ) |
| USB HS (host ch/device ch) | ( 0 / 0 ) |
| USB SS (host ch/device ch) | ( 0 / 0 ) |
| SCI or UART (ch) | 11, 13 |
| SPI (ch) | 14, 16 |
| I2C (#) | 13, 14, 15, 16 |
| CAN (ch) | 2 |
| CAN-FD (ch) | 0 |
| Wireless | No |
| SDHI (ch) | 0, 1 |
| High Resolution Output Timer | No |
| PWM Output (pin#) | 38, 39 |
| 32-Bit Timer (ch) | 3 |
| 16-Bit Timer (ch) (#) | 18 |
| 8-Bit Timer (ch) | 4 |
| Standby operable timer | No |
| 12-Bit A/D Converter (ch) | 22, 29 |
| 24-Bit Sigma-Delta A/D Converter (ch) | 0 |
| 16-Bit D/A Converter (ch) | 0 |
| 12-Bit D/A Converter (ch) | 1, 2 |
| 8-Bit D/A Converter (ch) | 0 |
| Capacitive Touch Sensing Unit (ch) | 0 |
| Segment LCD Controller | No |
| Security & Encryption | Unique ID, Unique ID, AES, 3DES, RSA, ECC, SHA-1, SHA224/SHA256, MD5, MAC, TRNG, Unique ID, AES, TRNG |
Application Block Diagrams
|
Smart HVAC Control with Integrated Slave Actuator
This slave actuator design for HVAC systems offers low power, secure bi-directional packet data flow, and automatic routing.
|
|
Embedded Programmable Logic Controller (PLC) for Industrial Use
Flexible embedded programmable logic controller (PLC) designed to integrate any type of interface for end-application needs.
|
|
Secure Cloud & Sensor Platform
Secure sensor platform with cloud connectivity, HMI features, and fast, secure firmware updates.
|
|
IP Gateway for Automatic Home or Building HVAC System
IP gateway system bridges control data to the cloud or Intranet using secure protocols.
|
|
Smart HVAC Master Actuator
Smart HVAC master actuator with AI-driven set points, multi-sensor data, and fail-safe redundancy.
|
|
Power Line Feeder Terminal Unit
Feeder terminal units monitor high-voltage power lines and measure and store data before uploading it to a central location.
|
|
Industrial Electronic Valve Control
Industrial electronic valve to offer precise, SIL2-compliant control.
|
|
Voice Over Power Line Communication
Renesas' PLC modem technology enables efficient voice transmission over low-voltage power lines.
|
|
IoT Remote Sensing System
Cloud-connected design simplifies secure IoT device linkage and data management with robust connectivity.
|
The Renesas RX65N Cloud Kit is a cloud communication performance evaluation kit that uses the RX65N microcontroller and can connect via Wi-Fi to Amazon Web Services (AWS). It provides an ideal evaluation environment for developers and supports the start of IoT device development by users.
The kit includes a Wi-Fi communication module, a temperature/humidity sensor, an optical sensor, a 3-axis accelerometer, a USB port for serial communications, and another USB port for debugging. The sensor and other data that is uploaded from the kit to AWS can be observed in the dashboard. The program can also be edited or debugged in Renesas' e² studio integrated development environment (IDE), by connecting the kit to a PC.
