SLG47011-E

Features

SAR ADC
- Selectable Resolution: 14-, 12-, 10-, 8-bit
- Up to 2.35Msps in 8-bit mode
- Sampling up to Four Analog Channels
- Output Options: Parallel, I²C, SPI
Programmable Gain Amplifier
- Gain Range: 1x to 64x
- Supports Differential and Single-Ended Modes
MathCore
- Multiplier, Adder, Subtractor, Shifter
Four Independent Data Buffers
- Buffer Length: up to Eight 16-bit Words
- Modes: Oversampling, Moving Average, Counter Capture
Memory Table Macrocell
- 4096 Words × 12-bit
- Modes: Full Range or Two Ranges
- Supports ADC Data Linearization or Custom y = F(x)
- ADDR-to-DATA / Storage Modes
16-bit Multichannel Digital Comparator (MDCMP)
- Up to Four Independent Channels
- Static or Dynamic Threshold
- Hysteresis Option for Each Channel
PWM Macrocell
- 12-bit Resolution
- Dynamic Duty Cycle Change (up to 4096 values)
Width Converter Macrocell
- 12-bit Parallel Data Output
- Optional Output: 12×1-bit, 6×2-bit, 3×4-bit
12-bit DAC
- 333ksps Digital-to-Analog Converter
Selectable Current Source
Integrated Voltage References (V_REF)
High Speed Analog Comparator
- Configurable Hysteresis and Reference
Combination Function Macrocells (18 total)
- 2×2-bit LUT or DFF/LATCH
- 8×3-bit LUT or DFF/LATCH with Set/Reset
- 6×DFF/LATCH or 3-bit LUT or Shift Registers
- 2×4-bit LUT or DFF/LATCH with Set/Reset
Multi-Function Macrocells (14 total)
- 10× DFF/LATCH or 3-bit LUT + 12-bit Delay/Counter
- 2× DFF/LATCH or 4-bit LUT + 16-bit Delay/Counter/FSM
- 1× DFF/LATCH or 3-bit LUT + 12-bit Delay/Counter/FSM
- 12-bit Memory Control Up/Down Counter
Communication Interfaces
- I²C Interface
- SPI Interface
Logic and Timing
- Programmable Delay with Edge Detector Output
- Deglitch Filter or Edge Detector
Oscillators (OSC)
- 2kHz/10kHz
- 20MHz/40MHz
Analog Temperature Sensor
Power-On Reset (POR) with CRC
Read Back Protection (Read Lock)
Power Supply
- 1.71V to 3.6V
Operating Temperature
- -40°C to +105°C
Compliance
- RoHS Compliant/Halogen-Free
Available Package
- 16-pin STQFN: 2.0mm × 2.0mm × 0.55mm, 0.4mm pitch

Find Other Products in GreenPAK: Programmable Mixed-Signal Products

Description

The SLG47011-E provides a small, low-power solution for commonly used analog-to-digital conversion and mixed-signal functions. A flexible data acquisition system used in conjunction with configurable logic provides a way to implement a wide variety of functions with minimal cost. The user can create a circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM), to configure the interconnect logic, the macrocells, and the IO pins.

Parameters

Attributes	Value
Special Features	ADC (14-bit, SAR), DAC (12-bit), PGA 1x-64x, Math Core, 4k x 12-bit RAM, 1x PWM
GPIOs (#)	14
Nominal VDD	1.71 - 3.6
ACMP Channels (#)	1
DCMP	1
CNT/DLY (Max) (#)	15
LUTs (Max) (#)	31
D Flip-flops (DFFs) (#)	31
Pipe Delay	6x 8-bit Shift Regs
# of Programable Delays (#)	1
Oscillator Type	LF OSC, Ring OSC
Temperature Sensor (ch) (#)	1
Interface	I2C, SPI
Memory Type	OTP
Temp. Range (°C)	-40 to +105°C
Product Category	AnalogPAK, Extended Temperature Range

Package Options

Pkg. Type	Pkg. Dimensions (mm)	Lead Count (#)	Pitch (mm)
TQFN	2.0 x 2.0	16	0.4

Product Comparison


	SLG47011-E	SLG47004	SLG47003	SLG47011
Special Features	1x PWM, 4k x 12-bit RAM, ADC (14-bit, SAR), DAC (12-bit), Math Core, PGA 1x-64x	2-Ch Auto-Trim, 2x An Switch, 2x Op Amp or 1x In-Amp, 2x Rheostat, EEPROM	2x Op Amps, 2x Rheostats, Analog Switch	1x-64x, 4k x 12-bit RAM, ADC (14-bit, SAR), DAC (12-bit), MathCore, PGA, PWM
GPIOs (#)	14	8	15	14
Memory Type	OTP	MTP	OTP	OTP
Lead Count (#)	16	24	24	16
Pkg. Dimensions (mm)	2.0 x 2.0	3.0 x 3.0	3.0 x 3.0	2.0 x 2.0
Temp. Range (°C)	-40 to +105°C	-40 to +85°C	-40 to +85°C	-40 to +85°C