Features
- Programmable Asynchronous State Machine
- Logic and Mixed-Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- Four 150mA LDO Regulators (SLG46580)
- Two 300mA LDO Regulators (SLG46582)
- One 600mA LDO Regulators (SLG46583)
- I2C Interface
- 2.5V (±8%) to 5V (±10%) Supply
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Four Analog Comparators (ACMP)
- Voltage Reference (Vref) for ACMPs
- Analog Temperature Sensor
- Fifteen Combination Function Macrocells
- Three Selectable DFF/Latch or 2-bit LUTs
- Six Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
- Five 8-bit Delays/Counters or 3-bit LUTs
- Combinatorial Logic
- One 4-bit LUT with Two Outputs
- Asynchronous State Machine
- Eight States
- Flexible Input Logic from State Transitions
- Real-Time Clock (RTC) Binary Counter
- Four Tri-Mode 150mA LDO Regulators
- High Power Mode (HP Mode): 150mA output with Quiescent Current at ~80μA
- Low Power Mode (LP Mode): 100μA output with Quiescent Current at ~5μA
- Bypass Mode: Acts Like a Load Switch
- Serial Communications
- I2C Slave Protocol Interface
- Programmable Delay with Edge Detector Output
- Additional Logic Functions
- 2 Deglitch Filters with Edge Detectors
- Two Oscillators (OSC)
- Configurable 25kHz/2MHz
- 2kHz Low Power Oscillator
- Eight-Byte RAM + OTP User Memory
- RAM Memory Space that is Readable and Writable via I2C
- User-defined Initial Values Transferred from OTP
- Power-On Reset (POR)
Description
The SLG46580 is a small, low-power component commonly used to integrate mixed-signal functions under the control of an asynchronous state machine. The user creates the circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the I/O pins, and the macrocells of the SLG46580. This highly versatile device allows for a wide variety of functions and control logic to be designed within a very small, low-power monolithic integrated circuit.
Parameters
| Attributes | Value |
|---|---|
| Nominal VDD | 2.3 - 5.5 |
| GPIOs (#) | 9 |
| Special Features | 4x LDO, ASM (8 states), RTC |
| ACMP Channels (#) | 4 |
| CNT/DLY (Max) (#) | 5 |
| LUTs (Max) (#) | 15 |
| D Flip-flops (DFFs) (#) | 9 |
| Pipe Delay | 16-stage |
| # of Programable Delays (#) | 1 |
| Oscillator Type | Conf. OSC, LF OSC |
| Temperature Sensor (ch) (#) | 1 |
| Interface | I2C |
| Memory Type | OTP |
| Temp. Range (°C) | -40 to +85°C |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) |
|---|---|---|
| TQFN | 2.0 x 3.0 | 20 |
Application Block Diagrams
 | Smart Wireless Wall Clock Compact, low-cost clock design with a smooth transition of digits and automatic brightness adjustment. |
Complete Your Design
Explore complementary products to elevate your design
Renesas Boards & Kits
GreenPAK SLG46580 Development Kit with Socket Adapter
The SLG46580V-SKT is a socket adapter kit for use with the SLG4DVKADV GreenPAK™ Advanced Development Board or SLG4DVKLITE GreenPAK Lite Development Board. The SLG46580V-SKT includes the SLG4SA20LD-20x30 socket adapter and 50 SLG46580V (TQFN-20) GreenPAK programmable mixed-signal matrix IC... Read More
GreenPAK SLG46580 (STQFN-20) 20-Pin DIP Prototyping Board
The SLG46580V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototyping using the SLG46580 programmable mixed-signal matrix with asynchronous state machine and LDOs IC. It requires the SLG4SA-DIP DIP Adapter to use with the Advanced Development Board.
The GreenPAK™ DIP... Read More
GreenPAK Advanced Development Board
The GreenPAK™ Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK programmable mixed-signal devices - for use with SLG46xxxX-SKT/SLG47xxxV-SKT socket kits.
The board works in tandem with the GreenPAK Designer software (built into the Go... Read More
Test This Board Remotely
GreenPAK Serial Debugger Board (GSD)
The GreenPAK™ Serial Debugger (GSD) device can be used for programming GreenPAK programmable mixed-signal matrix IC products with multiple-time non-volatile memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with an I²C interface. This... Read More
GreenPAK Lite Development Board
The GreenPAK™ Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in conjunction with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
Support Communities
-
SLG46580 Mean Time Between Failure
I'm looking for the MTBF for the SLG46580, or any SLG for that matter for some product lifecycle work. Where can I find that information?
Jan 5, 2022 -
Check out the key features of the SLG46580/2/3's low-dropout (LDO) regulator !
Check out the app note below to look into SLG46580/2/3 LDO key feature set: https://www.dialog-semiconductor.com/AN-CM-254
Aug 29, 2018 -
SLG46580 paralleled outputs
I have an application that needs an LDO channel with 350mA or so of output and another LDO channel of 50mA. Would it be possible to use an SLG46580, set LDO0, LDO1 and LDO2 to the same voltage, and parallel the outputs to get 450mA of capacity?
May 24, 2021
Support Communities
