Overview
Description
The SLG47105 combines mixed-signal logic and high-voltage H-bridge functionality in a tiny 2mm x 3mm QFN package. A one-time programmable (OTP) non-volatile memory (NVM) stores user-defined solutions in the form of interconnections of internal logic, I/O pins, and macrocells. Integrated dual H-Bridge/quad Half-Bridge functionality allows driving different loads up to 2A per output with up to 13.2V voltage. The SLG47105 advanced PWM macrocells provide the ability to drive multiple motors with different PWM frequencies and duty cycles. Low idle current consumption in combination with a compact size further extends the field of possible applications. This highly versatile device allows for a wide variety of mixed-signal functions to be designed alongside high-voltage capabilities within a tiny and thermally efficient IC.
Features
- Up to 13.2V High Voltage and up to 2A High Current Drive GPOs
- Full H-Bridge and Independent Half-Bridge Control
- Flexible 8-bit PWMs Macrocells
- Constant Current Regulation
- Constant Voltage Regulation
- Two Wide Range Power Supply Inputs
- 2.5V (±8%) to 5.0V (±10%) VDD
- 3.3V (±10%) to 12.0V (±10%) VDD2
- Built-in Protections:
- Undervoltage Lockout
- Overcurrent Protection
- Thermal Shutdown
- I2C control
- Operating Temperature Range: -40°C to 85°C
- One-Time Programmable Non-Volatile Memory
- Low current consumption (nA level)
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Four High Voltage, Current Drive GPOs with low RDS_ON
- Two 8-bit PWM Macrocells with Built-in 16-byte Register File
- Two Oscillators
- 2.048kHz oscillator
- 25MHz oscillator
- Two High-Speed General-Purpose Rail-to-Rail Analog Comparators with Integrated Voltage Reference
- Differential Amplifier with Integrator and Analog Comparator
- Two Current Sense Comparators with Integrated Voltage Reference
- Twelve Combination Function Macrocells
- Three Selectable DFF/Latch or 2-bit LUTs
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Six Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
- One Selectable DFF/Latch or 4-bit LUT
- I2C Serial Communication Macrocell
- Temperature Sensor
- Filter with Edge Detector
- Programmable Delay with Edge Detector
- Power-On Reset (POR)
Comparison
Applications
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
Development
SLG47105V-SKT
Active
HVPAK SLG47105 Development Kit with Socket Adapter
The SLG47105V-SKT includes the SLG4SA20HV-20x30 socket adapter and 50 SLG47105V samples.
Recommended Documents:
Evaluation
SLG47105V-EVB
Active
HVPAK SLG47105 Evaluation Board
The SLG47105V-EVB board enables the evaluation of the SLG47105V HVPAK™ programmable mixed-signal matrix IC. The board has been developed for testing designs with all features and high current loads.
The SLG47105 combines mixed-signal logic and high-voltage H-bridge functionality in a tiny 2mm x...
Recommended Documents:
Demonstration
SLG47105V-DMO
Active
HVPAK SLG47105 DC/Stepper Motor and LED Control Demonstration Board
The HVPAK™ SLG47105 demo board has been developed for testing designs based on SLG47105 with built-in DCM, stepper motor, and LED.
Recommended Documents:
Test This Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Development
SLG47105V-DIP
Active
HVPAK SLG47105 20-Pin DIP Prototyping Board
The SLG47105V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
Recommended Documents:
Development
SLG4DVKADV
Active
GreenPAK Advanced Development Board
The GreenPAK™ Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK devices - for use with SLG46xxxX-SKT/SLG47xxxV-SKT socket kits.
It works in tandem with the GreenPAK Designer software (built into the Go Configure™ Software Hub), and it allows...
Recommended Documents:
Test This Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Development
SLG4SA-DIP
Active
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
Recommended Documents:
Development
SLG4DVKGSD
Active
GreenPAK Serial Debugger Board (GSD)
The GreenPAK™ Serial Debugger (GSD) device can be used for programming GreenPAK programmable mixed-signal matrix IC products with multiple-time non-volatile memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with an I²C interface. This...
Recommended Documents:
Development
SLG4DVKLITE
Active
GreenPAK Lite Development Board
The GreenPAK™ Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in conjunction with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
Recommended Documents:
Development
SLG4DVKINTRO
Active
GreenPAK Introduction Kit
The SLG4DVKINTRO GreenPAK™ Introduction Kit is an ideal starting point for customers beginning new development projects. This comprehensive kit includes the SLG4DVKADV GreenPAK Advanced Development Board and the SLG4SA-DIP Adapter, which is designed to work seamlessly with the development board....
Recommended Documents:
Development
AS025-HVPAK
Active
DC Motor/Stepper Motor Driver Arduino and Pmod Development Kit
The AS025-HVPAK kit is an implementation of the HVPAK™ programmable mixed-signal matrix over Pmod™ that provides flexibility for users to control and configure the HVPAK motor drive using any MCU/MPU. There are multiple protection sections implemented to use it as a standalone motor drive as...
Recommended Documents:
Test This Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Models
| Model - Other | ZIP 9.81 MB | |
1 item
|
||
Product Options
Applied Filters:
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
SLG47105
Hello Dialog, SLG47105 looks very interesting but i need to support 14-15V. Is there any way to increase Vcc capability on the bridge ? Thanks Vincent.
Feb 26, 2021 -
SLG47105V ldle current
have a fresh naked chip on a testboard, nothing connected but VDD and I2C. emulated the chip using the I2C serial debuger board ext supply, and vcc current ends up to 32.6mA@3V after hitting the emulation button; after removing the I2C the current is still there. it does ...
Feb 10, 2021 -
SLG47105V emulation (External)
Hello, I am trying to debug a SLG47105V. I have connected SCL and SDA from the GreenPak Advanced development board to the external chip and have selected 'external 0001' as Device. The SLG47105V is powered correctly When pressing Emulation, everthing goes fine, no error, but somehow the chip is not ...
Mar 25, 2022
FAQs
-
What is a maximum Vdd for SLG47105?
Last Updated: 06/24/2025 Question: What is a maximum Vdd for SLG47105? Answer: Maximum Vdd2 for SLG47105V is 13.2V. Suitable Products SLG471x
Jun 24, 2025 -
What is a maximum number of motors HVPAK can control?
Last Updated: 06/24/2025 Question: What is a maximum number of motors HVPAK can control? Answer: SLG47105 can control 2 DC motors, SLG47115 can control 1 motor. Suitable Products SLG471x
Jun 24, 2025 -
Use of Analog Switches in GreenPAK as Transformer driver
... at high frequency (400kHz) and high current (up to 100mA) the package will not dissipate the heat. For driving such loads, using HVPAK family devices SLG47105 or SLG47115 is recommended. These two ICs have high voltage outputs, strong enough high current drive with powerful body (flyback) diodes. These ICs are ...
Apr 14, 2023
Videos & Training
HVPAK- High Voltage Programmable Mixed-Signal IC
HVPAK combines flexible motor control with custom mixed-signal logic in a single compact chip. See how HVPAK can optimize your next high-voltage design.
Video List
