Overview
The RZ/G3L Evaluation Board Kit is designed for users to evaluate the features and performance of the RZ/G3L and RZ/G3SE MPUs. This is a ready-to-use development platform for entry-class HMI and IoT edge applications. Download curated software packages that seamlessly work with this evaluation board kit.
For more details, refer to the RZ/G3L SMARC Module Board Manual and RZ SMARC Series Carrier Board Manual.
Features
- Device: RZ/G3L R9A08G046L46GBG
- Cortex®-A55 x4, Cortex-M33 Single
- LFBGA 400-pin, 14mmSq body, 0.5mm pitch
- SMARC Module Board
- LPDDR4 SDRAM: 2GB × 1
- QSPI flash memory: 16MB × 1
- eMMC memory: 64GB × 1
- PMIC power supply RAA215300#HAA implemented
- microSD card slot x2
- Micro HDMI, over parallel interface
- I3C connector
- JTAG connector
- ADC x8 channels
- PDM MEMS microphone
- Current monitor (USB Micro-B)
- Carrier Board
- Gigabit Ethernet x2
- USB2.0 x2ch (OTG x1, Host x2 (via USB hub))
- CAN-FD interface x2
- MIPI CSI-2 camera interface
- Micro HDMI, over MIPI-DSI/LVDS interface x1
- microSD card slot
- Mono speaker interface, stereo headphone, mic. and aux. interfaces
- Digilent Pmod™ x3 (Type-2A, Type-3A, Type-6A)
- PCIe Gen2 4-lane slot (RZ/G3L supports only 1-lane)
- M.2 Key E interface
- M.2 Key B interface and SIM card slot
- Module supply current monitor
- Coin cell battery holder
- USB Type-C power input
Products in the Design

| RAA215300 | High-Performance 9-Channel PMIC Supporting DDR Memory, with Built-In Charger and RTC |
Box Contents
- RZ/G3L module board (SMARC2.1.1)
- Common carrier board II (for RZ/G3L, RZ/G3S, and RZ/G3E)
- Various adapter boards, cables, screws, etc.
Not Included
- 65W USB Type-C charger and USB Type-C to Type-C cable
- USB Power Delivery (PD)
- Output: 5V3A, 9V3A,15V3A, 20V3.25A
- microSD UHI-Class 10 8GB or more
Design Files & Documentation
- Application NoteThis document presents the usage of "Current Measurement Program" for RZ/G series. This "Current Measurement Program" measures the current, plots the graph and saves data.
- PCB Design FilesThe design data includes the xchematic, BOM, PCB layout files, and Gerber artwork for the RZ/G3L SMARC module board.
- PCB Design FilesThe design data includes the schematic, BOM, PCB layout files, and Gerber artwork for the RZ SMARC series carrier board II.
- Quick Start GuideThe RZ/G3L Evaluation Board Kit (EVK) supports rapid Linux and HMI development with a pre-built image that includes the HMI SDK. Users can boot Linux, access HMI functionality, and begin evaluating platform capabilities with minimal setup. The board support package (BSP) also provides a foundation for customization and further software development.
- Manual - HardwareThe RZ/G3L Evaluation Board Kit is a reference platform designed for evaluating the RZ/G3L MPU. It consists of a module board and a carrier board, with the module board compliant with the SMARC V2.1.1 standard. This manual provides a comprehensive functional description of the RZ/G3L SMARC module board.
- Manual - HardwareThe RZ SMARC Series Carrier Board II is a platform for evaluating various RZ MPUs and is used in combination with a SMARC v2.1.1-compliant module board. This manual provides a comprehensive functional description of the carrier board.
- Quick Start GuideThe RZ/G3L Evaluation Board Kit (EVK) supports rapid Linux and HMI development with a pre-built image that includes the HMI SDK. Users can boot Linux, access HMI functionality, and begin evaluating platform capabilities with minimal setup. The board support package (BSP) also provides a foundation for customization and further software development.
Recommended Documents (1)
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
- Quick Start GuideThe RZ/G3L Evaluation Board Kit (EVK) supports rapid Linux and HMI development with a pre-built image that includes the HMI SDK. Users can boot Linux, access HMI functionality, and begin evaluating platform capabilities with minimal setup. The board support package (BSP) also provides a foundation for customization and further software development.
- Manual - HardwareThe RZ/G3L Evaluation Board Kit is a reference platform designed for evaluating the RZ/G3L MPU. It consists of a module board and a carrier board, with the module board compliant with the SMARC V2.1.1 standard. This manual provides a comprehensive functional description of the RZ/G3L SMARC module board.
- Manual - HardwareThe RZ SMARC Series Carrier Board II is a platform for evaluating various RZ MPUs and is used in combination with a SMARC v2.1.1-compliant module board. This manual provides a comprehensive functional description of the carrier board.
Manuals & Guides (3)
- Application NoteThis document presents the usage of "Current Measurement Program" for RZ/G series. This "Current Measurement Program" measures the current, plots the graph and saves data.
Application Notes & White Papers (1)
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
- PCB Design FilesThe design data includes the xchematic, BOM, PCB layout files, and Gerber artwork for the RZ/G3L SMARC module board.
- PCB Design FilesThe design data includes the schematic, BOM, PCB layout files, and Gerber artwork for the RZ SMARC series carrier board II.
Schematics & Design Files (2)
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
Software & Tools
Filters
Software & Tools
Filter by Type
Partner Solutions
- Software PackageThe RZ FSP is an enhanced software package designed to deliver user-friendly, scalable, high-quality software for embedded system designs using the Renesas RZ family of Arm microprocessors.
- Software PackageRZ Linux BSP Plus is a software package designed to run on Renesas Evaluation Board Kit (EVK). It supports latest LTS Linux kernel, Yocto Project, and middleware features specific to RZ MPUs.
- Software PackageA software package for developing multi-OS solutions, consisting of FSP as a software package for Cortex-M or R core MPUs, and OpenAMP as a standardized API for framework for interprocessor communication.
- Software PackageThe RZ/G HMI SDK is an all-in-one Linux-based development environment. It includes all the software required to build HMI applications quickly and efficiently.
- IDE and Coding ToolEclipse-based Renesas integrated development environment (IDE).
- Solution ToolkitRZ Smart Configurator is a utility for combining software in ways that meet your needs. It simplifies the embedding of Renesas drivers in your systems through supports for importing middleware and drivers and configuring pins.
- Software & Tools - Other
- OS and RTOSArmadillo Base OS is a Linux distribution optimized for IoT edge devices. It features standard container management capability, separating application environments from the core system for secure operation. The architecture utilizes dual-partition memory banks and automated rollback mechanisms for safe remote updates. Robust IoT security features include secure boot, data encryption, vulnerability management using a SBOM, and compliance with JC-STAR standards. Furthermore, the OS integrates with the Armadillo Twin cloud platform for secure OTA updates and device management.Provided By: Atmark Techno, Inc.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
- Software PackageThe RZ FSP is an enhanced software package designed to deliver user-friendly, scalable, high-quality software for embedded system designs using the Renesas RZ family of Arm microprocessors.
- Software PackageRZ Linux BSP Plus is a software package designed to run on Renesas Evaluation Board Kit (EVK). It supports latest LTS Linux kernel, Yocto Project, and middleware features specific to RZ MPUs.
- Software PackageA software package for developing multi-OS solutions, consisting of FSP as a software package for Cortex-M or R core MPUs, and OpenAMP as a standardized API for framework for interprocessor communication.
- Software PackageThe RZ/G HMI SDK is an all-in-one Linux-based development environment. It includes all the software required to build HMI applications quickly and efficiently.
- IDE and Coding ToolEclipse-based Renesas integrated development environment (IDE).
- Solution ToolkitRZ Smart Configurator is a utility for combining software in ways that meet your needs. It simplifies the embedding of Renesas drivers in your systems through supports for importing middleware and drivers and configuring pins.
- Software & Tools - Other
Software & Tools (7)
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Make sure all keywords are spelled correctly.
Try fewer, different, or more general terms to vary your search.
If you have filters applied, consider deselecting some to broaden your results.
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
- OS and RTOSArmadillo Base OS is a Linux distribution optimized for IoT edge devices. It features standard container management capability, separating application environments from the core system for secure operation. The architecture utilizes dual-partition memory banks and automated rollback mechanisms for safe remote updates. Robust IoT security features include secure boot, data encryption, vulnerability management using a SBOM, and compliance with JC-STAR standards. Furthermore, the OS integrates with the Armadillo Twin cloud platform for secure OTA updates and device management.Provided By: Atmark Techno, Inc.
Partner Solutions (1)
Sample & Buy
Videos & Training
The RZ/G3L and RZ/G3SE multi-core MPUs combine ultra-low standby power consumption of down to 1mW with full pin compatibility, enabling scalable designs that support extended battery-powered operation.
Using a common hardware footprint and shared development environment, developers can efficiently migrate between devices and scale applications from feature-rich HMI panels to intelligent IoT edge systems while reducing development effort and accelerating time to market.