Overview
Description
The R9A06G037 is a high-performance Narrow Band Power Line Communication (NB-PLC) modem IC. It integrates a high-performance DSP core and an MCU core (Arm® Cortex®-M3). The DSP core mainly handles the PLC PHY layer protocol and the Arm core handles the upper layer protocol. R9A06G037 can support a variety of PLC protocols such as G3-PLC (CENELEC, ARIB, and FCC), PRIME, and many others.
Features
- High-performance DSP
- Handles PLC PHY layer and other real-time operations
- 276MHz maximum clock frequency
- 128KB of instruction RAM and 128KB of data RAM
- Dedicated instructions for Vitervi, read Solomon and others
- MCU (Arm Cortex-M3)
- Handles PLC MAC layer and upper layer operation
- 138MHz maximum clock frequency
- 512KB of RAM
- AES128 encryption and decryption hardware engine
- CRC hardware engine
- 16KB of shared memory
- Analog front-end circuit
- Programmable and multiplexed general-purpose input/output (GPIO) pins
- UART (2ch), CSI (2ch), IIC, Serial-ROM-IF (Single/Dual/Quad), PWM (2ch) and GPIO (16)
- Integrated regulator: 3.3V input and 1.1V output
- Power supply voltage: 3.3V
- PKG: 64-pin QFN, 9mm x 9mm, 0.5mm pitch
- Operating temperature: -40 ℃ to +85 ℃
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 794 KB 日本語 | |
| Schematic | PDF 455 KB 日本語 | |
| Schematic | PDF 591 KB 日本語 | |
| Schematic | PDF 518 KB 日本語 | |
4 items
|
||
Design & Development
Boards & Kits
Evaluation
RTK0EE0003D01002BJ
Active
CPX3 Evaluation Kit for AC and DC over 48V (J70D1 with RX631)
For use in Japan, please use RTK0EE0003D02002BJ (J70D2).
The CPX3 Evaluation Kit J70D1 is a tool to evaluate the hardware and the software of Renesas' PLC modem LSI R9A06G037 (CPX3). This kit supports CENELEC-A, FCC and ARIB frequency bands. This chapter introduces the configuration and...
Evaluation
RTK0EE0007D01001BJ
Active
CPX3 Evaluation Kit for DC under 48V (J80D1 with RX651+Audio circuit)
The Renesas CPX3 Evaluation Kit J80D1 is a power line communication (PLC) evaluation kit for direct current (DC) power lines that can be used to carry out software development and system evaluation using the R9A06G037 PLC modem IC. This evaluation kit supports audio communication solutions. Two...
Evaluation
RTK0EE0007D02001BJ
Active
CPX3 Evaluation Kit for DC under 48V (J80D2 with RL78/G13)
This power line communication evaluation kit for direct current (DC) power lines can be used to carry out software development and system evaluation using the R9A06G037 PLC modem IC. Two or more of this kit are necessary for evaluating PLC communication.
Evaluation
Y-G-HYBRID-PLC-RF
Active
Hybrid PLC and Sub-GHz Communication Evaluation Kit
This product is an evaluation kit for developing software and evaluating systems compatible with Renesas' PLC modem IC R9A06G037 and Renesas’ Sub-GHz wireless IC RAA604S00. This kit can be configured to support many configurations, PLC only R9A06G037, Hybrid (PLC + RF) R9A06G037+ RAA604S00, RF...
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters:
Videos & Training
Quick Start Guide - PLC & RF Hybrid System (PLC Version)
This video serves as a Quick Start Guide for the PLC＆RF Hybrid (PLC Version), covering essential pre-requisites, setting up the Y-G-Hybrid-PLC-RF communication board, and demonstrating how to run and utilize the G3-PLC SimpleMAC Tool.
Video List
