Smart Configurator

RX Family: Importing FIT Modules

Renesas offers a range of FIT (Firmware Integration Technology) modules which you can import and then modify their settings, such as pin assignments. You can also use them with code from the driver code generator.

Details of FIT >>

RZ Family: Importing middleware and drivers from the RZ/A2M Software Package ^(Note1)

The RZ/A2M Software Package consists of a range of middleware and drivers, which you can import and then modify settings such as pin assignments as required.

Details of the RZ/A2M Software Package >>

Note

1. We currently support version 2.0.0 and later versions of the RZ/A2M Software Package.

Clock settings

You can make clock settings by selecting a clock source and making connections in the block diagram in the [Clocks configuration] window.

Component settings

In the [Software component configuration] window, you can embed sample code ^(Note1) and make settings for peripheral modules. After selecting the module you wish to set up for use, you can check for errors in settings (with some types indicated on the display) or switch the channels for use by drivers of multi-channel modules.

Note

1. Embedding of sample code is currently only supported for RX family devices.

The [Pins Configuration] window (displayed per peripheral module)

Specifying a peripheral module in the [Pins Configuration] window displays the pin functions for use by the module and allows you to set the assignment of the functions to pins.

[MCU Package] window

The [MCU Package] window displays a symbolic view of the pins, indicating by colors which pins are and are not in use, which have been assigned contending multiplexed functions, and so on. This makes it easy to check the overall situation.

Automatic resolution of contention between pin functions

In cases of contention for a pin, clicking on the pin brings up a list allowing automatic changing of the assignment of the pin to resolve the contention.