Skip to main content

Features

  • User-defined Auto-Trim procedure for two independent analog channels
  • Event-triggered memory self-programming routine for digital rheostats
  • In system programmability
  • Multiple-time programmable memory
  • Configurable Power Down option for all analog and digital macrocells
  • Wide range power supply
  • 2.5V (±4%) to 5V (±10%)
  • Low current consumption
  • Operating temperature range: -40°C to 85°C
  • RoHS-compliant/Halogen-free
  • Package: STQFN-24 (3.0mm x 3.0mm x 0.55mm, 0.4mm pitch)
  • Macrocells Overview
    • Two general-purpose op amps with configurable bandwidth
      • Instrumentation amplifier mode, including a third internal op amp
    • Two 10-bit 100kΩ digital rheostats with optional potentiometer mode
    • Two SPST analog switches
    • Three analog comparators
      • Two low-power general-purpose rail-to-rail analog comparators (ACMPxL)
      • One low-offset chopper comparator
    • Three oscillators (OSC)
      • 2.048kHz oscillator
      • 2.048MHz oscillator
      • 25MHz oscillator
    • Thirteen combination function macrocells
      • Three selectable DFF/LATCH or 2-bit LUTs
      • One selectable programmable pattern generator or 2-bit LUT
      • Seven selectable DFF/LATCH or 3-bit LUTs
      • One selectable pipe delay or ripple counter or 3-bit LUT
      • One selectable DFF/LATCH or 4-bit LUT
    • Seven multi-function macrocells
      • Six selectable DFF/LATCH or 3-bit LUTs + 8-bit delay/counters
      • One selectable DFF/LATCH or 4-bit LUT + 16-bit delay/counter
    • I2C serial communication interface
    • Analog temperature sensor
    • 2-kbit (256 x 8) I2C-compatible (2-wire) serial EEPROM emulation with software write protection
    • Power-on Reset (POR)

Description

The SLG47004 is an AnalogPAK™ programmable mixed-signal IC with operational amplifiers, digital rheostats, EEPROM, and a wide set of analog and digital macrocells.

SLG47004 builds upon the flexibility of the GreenPAK’s traditional mixed-signal solution by integrating a mix of advanced analog features, including op amps with programmable bandwidth, 10-bit digital rheostats, analog switches, and a chopper analog comparator. The unique Auto-Trim feature highlights the ability of this GreenPAK device to periodically tune its rheostat value to either compensate for system error sources or reconfigure circuit parameters. The SLG47004 provides dynamic Power Down control for all analog and digital blocks to optimize power consumption performance. Common applications include sensor interfaces, ADC analog front-ends, configurable amplifiers, tunable filters, and a variety of other analog circuits. This multi-time programmable solution is built into a tiny 3mm x 3mm package.

This device is factory-configurable.
Try the Custom Part Configuration Utility.

Parameters

AttributesValue
GPIOs (#)8
Special Features2x Op Amp or 1x In-Amp, 2x Rheostat, 2x An Switch, 2-Ch Auto-Trim, EEPROM
ACMP Channels (#)3
CNT/DLY (Max) (#)7
LUTs (Max) (#)20
DFF (Max) (#)18
Pipe Delay16-stage
# of Programable Delays (#)1
Oscillator TypeRC OSC, LF OSC, Ring OSC
Temperature Sensor (ch) (#)1
InterfaceI2C
Memory TypeMTP
Temp. Range (°C)-40 to +85°C

Package Options

Pkg. TypePkg. Dimensions (mm)Lead Count (#)Pitch (mm)
TQFN3.0 x 3.0240.4

Product Comparison

SLG47004SLG47003SLG47004-ASLG47011
Special Features2-Ch Auto-Trim, 2x An Switch, 2x Op Amp or 1x In-Amp, 2x Rheostat, EEPROM2x Op Amps, 2x Rheostats, Analog Switch2-Ch Auto-Trim, 2x Analog Switch, 2x Op Amp or 1x Inst-Amp, Rheostat1x-64x, 4k x 12-bit RAM, ADC (14-bit, SAR), DAC (12-bit), MathCore, PGA, PWM
GPIOs (#)815814
Memory TypeMTPOTPMTPOTP
Lead Count (#)24242416
Pkg. Dimensions (mm)3.0 x 3.03.0 x 3.04.0 x 4.02.0 x 2.0
Temp. Range (°C)-40 to +85°C-40 to +85°C-40 to +125°C-40 to +85°C
Automotive Rating--AEC-Q100 (Grade 1)-

Application Block Diagrams

The health monitoring patch interactive block diagram features NFC charging, Bluetooth connectivity, and adaptable locationing for seamless care in diverse settings.
Health Monitoring Medical Patch
Compact medical patch with continuous health monitoring and location tracking for patient safety.
Automatic Espresso Maker with Digital Controls Block Diagram
Automatic Espresso Maker with Digital Controls
AI-powered espresso machine with a large touchscreen and smart cloud connectivity.
Cost-Effective Bluetooth-Enabled BGM Block Diagram
Blood Glucose Monitor (BGM)
Renesas' BGMs offer cost-effective, compact glucose monitoring with optional Bluetooth LE or NFC for seamless connectivity.
Active Stylus Block Diagram
Active Stylus
A tablet active stylus with pressure sensitivity, motion detection, and wireless charging.
Thermometer with Wireless Sensor Block Diagram
Smart BBQ Thermometer
Smart BBQ thermometer offers real-time temperature monitoring and wireless connectivity for safer, perfectly cooked meals.
Continuous Glucose Monitor (CGM) for Closed-Loop Operation with Insulin Pump Block Diagram
Continuous Glucose Monitor (CGM) for Closed-Loop Operation with Insulin Pump
Continuous glucose monitor with detachable sensors, rechargeable battery, and precision tech for optimal glucose management.
Health Monitor Band Block Diagram
Health Monitor Band
A wearable health band that reads the user's heart rate and respiration using a piezoelectric sensor.
Smart Compost Maker Block Diagram
Smart Compost Maker
Smart compost maker design featuring Wi-Fi, motor drive, and touch control for fast and efficient prototyping.

Additional Applications

  • Pressure sensor interfaces
  • Photodetector interfaces (transimpedance amplifiers, TIA)
  • Force Sensitive Resistor (FSR) sensor interface
  • Programmable Gain Amplifiers (PGA)
  • Instrumentation amplifiers (in-amp)
  • Sample and hold circuits
  • Portable and handheld electronics
  • Home appliances and IoT
  • Robotics
  • Other consumer and industrial electronics
This device is factory-configurable.
Try the Custom Part Configuration Utility.

Applied Filters: