Features
- Two Programmable Bandwidth Op Amps
- 3-Op Amp Instrumentation Amplifier Function (including Additional Internal Op Amp)
- Rail-to-Rail Input
- Low Quiescent Current
- Low Offset Voltage
- Analog Comparator Mode
- Optional Vref Voltage Connection for Input Pins
- Two 1024 Position Digital Rheostats
- User-Defined Auto-Trim Option
- Manual Control Option
- I²C Control Option
- Potentiometer Mode
- Two Single-Pole/Single-Throw Analog Switches
- Voltage or Current Source/Sink Mode
- One Low-Offset Chopper Comparator
- Two Low-Power General-Purpose ACMPs
- ACMP Sampling Mode
- Hysteresis with Independently Selectable Thresholds
- Three Voltage References
- Two ACMP Vref Output Buffers
- One High Drive Buffer
- Thirteen Combination Function Macrocells
- Three Selectable DFF/LATCH or 2-bit LUTs
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Seven Selectable DFF/LATCH or 3-bit LUTs
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
- One Selectable DFF/LATCH or 4-bit LUT
- Seven Multi-Function Macrocells
- Six Selectable DFF/LATCH or 3-bit LUTs + 8-bit Delay/Counters
- One Selectable DFF/LATCH or 4-bit LUT + 16-bit Delay/Counter
- Serial Communications
- I²C Protocol Interface
- Programmable Delay with Edge Detector Output
- Deglitch Filter or Edge Detector
- Three Oscillators
- 2.048kHz Oscillator
- 2.048MHz Oscillator
- 25MHz Oscillator
- Analog Temperature Sensor
- Power-On Reset (POR)
- In-System Debug
- Multiple Time Programmable Memory in Development
- Wide Range Power Supply: 2.5V (± 4%) to 5V (± 10%) VDD
- Ambient Operation Temperature Range: -40°C to 125°C
- RoHS-Compliant/Halogen-Free
- Package Available: 24-pin TQFN: 4mm x 4mm x 0.75mm, 0.5mm pitch
- AEC-Q100 (TA = -40°C to 125°C) Qualified
Description
The SLG47004-A provides a small, low-power component for commonly used analog signal processing and mixed-signal functions. Individual, tunable, analog components used in conjunction with configurable logic provide a way to solve a wide variety of tasks with minimal costs. The user-defined circuit design can be programmed into non-volatile memory (NVM) to configure the interconnect logic, the analog and digital macrocells, and the IO pins of the SLG47004-A.
Parameters
| Attributes | Value |
|---|---|
| GPIOs (#) | 8 |
| LUTs (Max) (#) | 20 |
| DFF (Max) (#) | 18 |
| ACMP Channels (#) | 3 |
| CNT/DLY (Max) (#) | 7 |
| # of Programable Delays (#) | 1 |
| Pipe Delay | 16-stage |
| Interface | I2C |
| Oscillator Type | RC OSC, LF OSC, Ring OSC |
| Temperature Sensor (ch) (#) | 1 |
| Automotive Rating | AEC-Q100 (Grade 1) |
| Special Features | 2-Ch Auto-Trim, 2x Analog Switch, 2x Op Amp or 1x Inst-Amp, Rheostat |
| Temp. Range (°C) | -40 to +125°C |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) |
|---|---|---|
| TQFN | 4.0 x 4.0 | 24 |
Product Comparison
| SLG47004-A | SLG47003 | SLG47004 | SLG47011 | |
| Special Features | 2-Ch Auto-Trim, 2x Analog Switch, 2x Op Amp or 1x Inst-Amp, Rheostat | 2x Op Amps, 2x Rheostats, Analog Switch | 2-Ch Auto-Trim, 2x An Switch, 2x Op Amp or 1x In-Amp, 2x Rheostat, EEPROM | 1x-64x, 4k x 12-bit RAM, ADC (14-bit, SAR), DAC (12-bit), MathCore, PGA, PWM |
| GPIOs (#) | 8 | 15 | 8 | 14 |
| Memory Type | MTP | OTP | MTP | OTP |
| Lead Count (#) | 24 | 24 | 24 | 16 |
| Pkg. Dimensions (mm) | 4.0 x 4.0 | 3.0 x 3.0 | 3.0 x 3.0 | 2.0 x 2.0 |
| Temp. Range (°C) | -40 to +125°C | -40 to +85°C | -40 to +85°C | -40 to +85°C |
| Automotive Rating | AEC-Q100 (Grade 1) | - | - | - |
Applications
- Infotainment
- Navigation
- Automotive Display Clusters
- Chassis and Body Electronics
- Sensor Interface
- Electronic/Electrical Architecture