特長
- Specifications per DLA VID V62/10602
- Full mil-temp electrical performance from -55°C to +125°C
- Controlled baseline with one wafer fabrication site and one assembly/test site
- Full homogeneous lot processing in wafer fab
- No combination of wafer fabrication lots in assembly
- Full traceability through assembly and test by date/trace code assignment
- Enhanced process change notification
- Enhanced obsolescence management
- Eliminates need for up-screening a COTS component
- High ESD protection on RS-485 outputs: ±16.5kV HBM
- Specified for +125°C operation (VCC ≤ 3.6V only)
- Logic supply pin (VL) eases operation in mixed supply systems
- Hot plug - Tx output remains tri-state during power-up
- Low Tx leakage allows >256 devices on the Bus
- High data rates: up to 16Mbps
- Low quiescent supply current: 150µA (Max); Very low shutdown supply current: 1µA (Max)
- -7V to +12V Common Mode Output Voltage Range (VCC ≤ 3.6V Only)
- Current limiting and thermal shutdown for driver overload protection (VCC ≤ 3.6V Only)
- Tri-statable Tx output
- 5V tolerant logic input when VCC ≤5V
説明
The ISL3298EMRTEP is a ±16. 5kV HBM ESD Protected (7kV IEC61000 contact), 3. 0V to 5. 5V powered, single transmitter for balanced communication using the RS-485 and RS-422 standards. This driver has very low bus currents (±40mA); therefore, it presents less than a 1/8 unit load to the RS-485 bus. This allows more than 256 transmitters on the network without violating the RS-485 specification 32 unit load maximum, and without using repeaters. Hot Plug circuitry ensures that the Tx outputs remain in a high impedance state while the power supply stabilizes. The driver on the ISL3298EMRTEP is not limited, so it can achieve a 16Mbps data rate and is offered in the -55°C to +125°C temperature range. This devices also feature a logic supply pin (VL) that sets the switching points of the DE and DI inputs to be compatible with a lower supply voltage in mixed voltage systems. For a companion single RS-485 receiver in micro packages, see the ISL3282EMRTEP.
アプリケーション
- Clock distribution
- High node count systems
- Space constrained systems
- Security camera networks
- Building environmental control/lighting systems
- Industrial/process control networks
| Part Number | Status | Samples | Stock | Package | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Pb (Lead) Free | Pb Free Category | MOQ | Temp. Range (°C) | CAGE code |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ISL3298EMRTEP-TK | Last Time Buy | Available | Out of Stock | TDFN | 8# | Reel | 1 | No | Solder Plate | 3000 | -55 to +125°C | 34371 |
- トレーニング英語PDF 719 KB R15TB0008EU0100 Rev.1.00 2023年12月18日
- トレーニング英語PDF 762 KB R15TB0007EU0100 Rev.1.00 2023年12月04日
- トレーニング英語PDF 208 KB R15TB0004EU0100 Rev.1.00 2023年10月26日
- トレーニング英語PDF 405 KB R15TB0003EU0100 Rev.1.00 2023年6月26日
- トレーニング英語PDF 239 KB R15TB0002EU0100 Rev.1.00 2023年6月21日
- アプリケーションノート英語PDF 365 KB AN1978 2023年4月12日AI生成コンテンツ: The document details surge protection circuits for RS-485 transceivers, focusing on Level 4 (4kV) protection using gas discharge tubes (GDTs) for higher overvoltage and overcurrent tolerance. It compares protection schemes by component count, board area, and cost, highlighting that higher-level protection increases complexity and expense. The BOMs for Level 3 and Level 4 circuits list components such as transceivers, bidirectional TVS diodes, transient blocking units, thyristors or GDTs, and resistors. The GDT switching characteristic explains how it diverts transient currents to ground by transitioning from high impedance to a crowbar current path. Simpler protection can be achieved with overvoltage protected transceivers.
- アプリケーションノート英語PDF 207 KB an1985 2022年8月19日AI生成コンテンツ: Transient protection for RS-485 transceivers involves careful TVS diode design to prevent damage from high surge currents. Internal ESD structures in the ISL3152E share transient current with external TVS diodes, risking damage without current-limiting resistors. Using thick-film resistors under 200 ohms between TVS and transceiver limits surge current while minimizing bus voltage attenuation. Recommended PCB layout includes low-inductance ground and Vcc planes, 0603 resistors for wave or reflow soldering, and proper component placement to reduce inductance and enhance protection.
- アプリケーションノート英語PDF 474 KB AN1979 2022年8月16日AI生成コンテンツ: The document explains surge protection using Renesas’ Overvoltage Protected (OVP) transceivers with various protection schemes. It details the use of TVS diodes and thyristors to protect data lines against surge currents while maintaining low capacitance for high data rates. Different configurations address various common-mode voltage ranges and surge levels, ensuring compliance with IEC61000-4-5 standards. The paper includes calculations for peak protection voltages and discusses device characteristics and combinations for robust surge protection in industrial applications.
- アプリケーションノート英語PDF 366 KB R15AN0011EU0100 Rev.1.00 2022年5月17日AI生成コンテンツ: This document provides detailed guidance on RS-485 transceiver design and application. It covers key topics such as design checklists, interfacing 5V transceivers with 3V controllers, mixing 3.3V and 5V transceivers on the same bus, and using high-speed transceivers at lower data rates. It explains maximum stub lengths, wiring differential inputs to accept single-ended signals, and proper bus termination. The document also discusses transient protection methods and highlights the benefits of specific transceiver models. Practical formulas and diagrams support implementation and troubleshooting in RS-485 networks.
- レポート英語PDF 438 KB R15AN0009EU0100 Rev.1.00 2022年3月04日
- アプリケーションノート英語PDF 178 KB r15an0002eu-rs-485-transient-protection 2019年10月28日
- 製品変更通知英語PDF 304 KB PCN19025 2019年8月08日
推奨ドキュメント (1)
データシート (1)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
- アプリケーションノート英語PDF 365 KB AN1978 2023年4月12日AI生成コンテンツ: The document details surge protection circuits for RS-485 transceivers, focusing on Level 4 (4kV) protection using gas discharge tubes (GDTs) for higher overvoltage and overcurrent tolerance. It compares protection schemes by component count, board area, and cost, highlighting that higher-level protection increases complexity and expense. The BOMs for Level 3 and Level 4 circuits list components such as transceivers, bidirectional TVS diodes, transient blocking units, thyristors or GDTs, and resistors. The GDT switching characteristic explains how it diverts transient currents to ground by transitioning from high impedance to a crowbar current path. Simpler protection can be achieved with overvoltage protected transceivers.
- アプリケーションノート英語PDF 207 KB an1985 2022年8月19日AI生成コンテンツ: Transient protection for RS-485 transceivers involves careful TVS diode design to prevent damage from high surge currents. Internal ESD structures in the ISL3152E share transient current with external TVS diodes, risking damage without current-limiting resistors. Using thick-film resistors under 200 ohms between TVS and transceiver limits surge current while minimizing bus voltage attenuation. Recommended PCB layout includes low-inductance ground and Vcc planes, 0603 resistors for wave or reflow soldering, and proper component placement to reduce inductance and enhance protection.
- アプリケーションノート英語PDF 474 KB AN1979 2022年8月16日AI生成コンテンツ: The document explains surge protection using Renesas’ Overvoltage Protected (OVP) transceivers with various protection schemes. It details the use of TVS diodes and thyristors to protect data lines against surge currents while maintaining low capacitance for high data rates. Different configurations address various common-mode voltage ranges and surge levels, ensuring compliance with IEC61000-4-5 standards. The paper includes calculations for peak protection voltages and discusses device characteristics and combinations for robust surge protection in industrial applications.
- アプリケーションノート英語PDF 366 KB R15AN0011EU0100 Rev.1.00 2022年5月17日AI生成コンテンツ: This document provides detailed guidance on RS-485 transceiver design and application. It covers key topics such as design checklists, interfacing 5V transceivers with 3V controllers, mixing 3.3V and 5V transceivers on the same bus, and using high-speed transceivers at lower data rates. It explains maximum stub lengths, wiring differential inputs to accept single-ended signals, and proper bus termination. The document also discusses transient protection methods and highlights the benefits of specific transceiver models. Practical formulas and diagrams support implementation and troubleshooting in RS-485 networks.
- アプリケーションノート英語PDF 178 KB r15an0002eu-rs-485-transient-protection 2019年10月28日もっと見る (13)
アプリケーションノート、ホワイトペーパー (13)
- 製品変更通知英語PDF 304 KB PCN19025 2019年8月08日
- 製品変更通知英語PDF 398 KB PCN15046 2016年1月07日
製品通知(PCN、EOLなど) (3)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
- トレーニング英語PDF 719 KB R15TB0008EU0100 Rev.1.00 2023年12月18日
- トレーニング英語PDF 762 KB R15TB0007EU0100 Rev.1.00 2023年12月04日
- トレーニング英語PDF 208 KB R15TB0004EU0100 Rev.1.00 2023年10月26日
マーケティング資料 (7)
- レポート英語PDF 438 KB R15AN0009EU0100 Rev.1.00 2022年3月04日
その他資料 (2)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。