Features
- Up to 20V bootstrap voltage half-bridge driver
- Programmable 4.5V to 5.5V gate drive voltage
- Single tri-level PWM input control
- Separate source and sink driver outputs for independent gate turn-on and turn-off control
- High-side peak driver current: 5A
- Low-side peak driver current: 10A
- Separate high-side and low-side programmable dead time control
- Fast propagation delay with low mismatch
- Full military temperature operation -55°C to 125°C ambient range
- 16 Ld Ceramic Leadless Chip Carrier (CLCC) hermetic package
Description
The ISL73041SEH is a PWM input 12V half-bridge GaN FET driver designed to drive low rDS(ON), high QGS enhancement-mode Gallium Nitride (eGaN) FETs up to 1.5MHz operation for DC/DC switching regulators. An integrated programmable GaN FET gate drive voltage, high-side bootstrap switch, and high gate drive current provide a compact and robust GaN FET half-bridge driver.
The ISL73041SEH is designed to interface directly to the ISL73847SEH dual-phase PWM buck controller to create a high-efficiency point-of-load regulator to power many of the latest low-voltage high-current FPGA and DSP digital core rails.
The ISL73041SEH is offered in a 16 Ld Ceramic Leadless Chip Carrier (CLCC) hermetic package. It is specified to operate across an ambient temperature range of -55°C to +125°C.
Parameters
| Attributes | Value |
|---|---|
| Rating | Space |
| Bus Voltage (Max) (V) | 12 |
| Driver Type | Half Bridge |
| FET Type | GaNFET |
| High Side Rise Time (max) (ns) | 29 |
| High Side Fall Time (max) (ns) | 26 |
| Input VCC (Min) (V) | 4.75 |
| Input VCC (Max) (V) | 13.2 |
| Low Side Rise Time (max) (ns) | 36 |
| Low Side Fall Time (max) (ns) | 30 |
| Drivers (#) | 2 |
| Output Type | Synchronous |
| Peak Output Source Current (A) | 2 (HS) /4 (LS) |
| Peak Output Sink Current (A) | 4 (HS) /8 (LS) |
| Gate Drive (V) | 4.5 |
| Temp. Range (°C) | -55 to +125°C |
| TID LDR (krad(Si)) | 75 |
| DSEE (MeV·cm2/mg) | 86 |
| Flow | RH Hermetic |
| Qualification Level | Class Ve, EM |
| Die Sale Availability? | Yes |
| PROTO Availability? | Yes |
Application Block Diagrams
 | Radiation Hardened Versal Power Tree A radiation hardened power supply for satellite applications using AMD Versal. |
Additional Applications
- High-current DC/DC point-of-load (POL) for FPGA and DSP supply rails
- 12V to 1V POL regulation
- GaN FET motor drivers
Complete Your Design
Explore complementary products to elevate your design
Renesas Boards & Kits
Radiation Hardened 12V GaN Half-Bridge Power Stage Evaluation Board
The ISL73041SEHEV1Z evaluation board evaluates the performance of the radiation hardened ISL73041SEH 12V half-bridge GaN FET driver in an open-loop buck configuration. The board includes the GaN FET half-bridge driver, Renesas GaN FETs, and a buck converter power stage inductor and output... Read More
Radiation Hardened Four-Phase 5V to 0.8V, 100A, 1MHz with PMBus Evaluation Board
The ISL73849SLHEV3Z evaluation board demonstrates the performance of a high-current, four-phase power solution built with two ISL73849SLH radiation hardened dual-phase PWM controllers, four ISL73041SEH GaN half-bridge drivers, and sixteen ISL70020SEH 40V GaN FETs. This configuration delivers up... Read More
Radiation Hardened Compact 12V to 1V, 50A Capable Power Supply Demonstration Board
The ISL73847SEHDEMO2Z demonstration board demonstrates the performance of the ISL73847SEH radiation hardened dual-phase buck controller. The board is optimized for a 4.5V to 15V input operation to generate a 50A max, 1V output.
Radiation Hardened Compact 12V to 1V, 25A Capable Power Supply Demonstration Board
The ISL73847SEHDEMO5Z demonstration board demonstrates the performance of the ISL73847SEH radiation hardened, dual-phase buck controller in single-phase mode. The board is optimized for a 4.5V to 15V input operation to generate a 25A max, 1V output.
Radiation Hardened Quad-Phase Current Mode PWM Controller Demonstration Board
The ISL73847SEHDEMO6Z demonstration board demonstrates the performance of two ISL73847SEH radiation hardened dual-phase buck controllers, four ISL73041SEH GaN half-bridge drivers, and twelve ISL70020SEH 40V GaN FETs in a 4-phase, 100A configuration. It is designed for the VERSAL VC1902 VCCINT... Read More
Power Management Reference Design for AMD Versal XQRVC1902
The ISLVERSALDEMO2Z board provides power management for the AMD Xilinx Space Grade Versal ACAP AI Core VC1902 using Renesas' radiation hardened power management devices. The Versal ACAP system requires various supply rails, including the core, digital, analog, and DDR memory. The ISLVERSALDEMO2Z... Read More
Power Management Reference Design for AMD Versal XQRVE2302
The ISLVERSALDEMO3Z is a comprehensive power management reference design tailored to meet the needs of the XQRVE2302, AMD’s Versal AI Edge Adaptive SoC. The XQRVE2302 integrates advanced AMD AI Engine (AIE) technology, known as AIE-ML, delivering superior performance for machine learning... Read More
Support Communities
-
Moisture sensitive level for ISL73041SEHl
What is the Moisture sensitive level for ISL73041SEHl. I don't see any MSL information on your site.
Mar 31, 2025
Support Communities
