Skip to main content
Renesas Electronics Corporation - June is Pride Month, a month to raise awareness of the rights and the culture of the LGBTQ+ community

Features

  • Single chip 56Gbps CDR/Retimer with transmit and receiver
  • Supports 56Gbps PAM-4 and 28Gbps NRZ
  • Output swing up to 850mVpp
  • 7-bit resolution for programmable and adaptive CTLE up to 7 dB equalization n receiver
  • Programmable 3-tap de-emphasis for a transmit
  • Linearity compensation for output through a look-up table
  • Independent, adaptive bandwidth control in RX CDR for optimum jitter tolerance 
  • Internal and automatic DC and phase offset calibrations
  • Reference-less and Master channel-less operation 
  • On-chip testability: EOM, JTOL, PRBS generator/checker, user-defined pattern generator
  • Embedded CPU with RAM/ROM and downloadable firmware
  • I2C control interface (16-bit address and data)

Description

The HXC44200 is a bi-directional dual channel PAM-4 CDR/Retimer. It supports a transmission data rate of 56Gbps PAM4 and 28Gbps NRZ. The HXC44200 can be used in a 50G SFP56 form factor and other small form factor modules. The device is optimized for Ethernet application. It is in full compliance with OIF CEI-56G-VSR and CEI-56G-MR. The total power consumption of the HXC44200 is below 700mW.

The HXC44200 has built-in programmable and adaptive equalization in both the receiver and the transmitter paths to compensate for transmission line losses and inter-symbol interference.

Auto DC-offset calibration is implemented with auto phase calibration and the unique CDR / Retimer architecture enables independent receive and transmit CDR loop bandwidth optimization for increased Jitter Tolerance and reduced Jitter Transfer performance.

The chip has a built-in, single 14GHz master VCO providing the oscillator output for each channel. In addition, the self-test functions, such as a PRBS generator / checker, Jitter Tolerance, and Eye Open Monitor, provide designers and users with module-level diagnostics and function tests.

The HXC44200 also integrates a CPU for programmable control, which could reduce BOM cost and enable better module design. I2C interface is used to control the built-in CPU.

Part NumberStatusSamplesStockPackageTemp. GradeCarrier Type
HXC44200-BFIObsoleteN/AOut of StockFCCSPITray
HXC44200-EVBObsoleteN/AOut of StockBOARDCBox
Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Browse Articles

Knowledge Base

Browse our knowledge base for helpful articles, FAQs, and other useful resources.
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?