Overview
Description
The SLG46824 programmable mixed-signal matrix IC with in-system programmability provides a small, low-power component for commonly used mixed-signal functions. The user creates the circuit design by programming the multiple-time programmable non-volatile memory (NVM) to configure the interconnect logic, the IOs, and the macrocells of the SLG46824. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power, single integrated circuit.
Features
- In-System Programmability
- Multiple-Time Programmable Memory
- Wide Range Power Supply
- 2.5V (±8%) to 5V (±10%) VDD
- 1.8V (±5%) to 5V (±10%) VDD2 (VDD2 ≤ VDD)
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Two Low-Power General-Purpose Rail-to-Rail Analog Comparators (ACMPxL)
- One Voltage Reference (Vref)
- Eleven Combination Function Macrocells
- Three Selectable DFF/Latch or 2-bit LUTs
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Six Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
- Eight Multi-Function Macrocells
- Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters
- One Selectable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter
- Serial Communications: I2C Protocol Interface
- Programmable Delay with Edge Detector Output
- Deglitch Filter with Edge Detector
- Three Oscillators (OSC)
- 2.048kHz Oscillator
- 2.048MHz Oscillator
- 25MHz Oscillator
- Power-On Reset (POR)
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 2.40 MB | |
| Manual - Development Tools | PDF 570 KB | |
| Manual - Development Tools | PDF 435 KB | |
| Manual - Development Tools | PDF 200 KB | |
| Device Errata | PDF 306 KB | |
| Application Note | PDF 512 KB | |
6 items
|
||
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
Development
SLG46824V-SKT
Active
GreenPAK SLG46824 (STQFN-20) Development Kit with Socket Adapter
The SLG46824V-SKT includes the SLG4SA20SP-20x30 socket adapter and 50 SLG46824V (STQFN-20) samples.
Recommended Documents:
Development
SLG46824V-DIP
Active
GreenPAK SLG46824 20-Pin DIP Prototyping Board
The SLG46824V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
Recommended Documents:
Development
SLG46824G-SKT
Active
GreenPAK SLG46824 (TSSOP-20) Development Kit with Socket Adapter
The SLG46824G-SKT includes the SLG4SA20-65x64 socket adapter and 50 SLG46824G (TSSOP-20) samples.
Recommended Documents:
Development
SLG4DVKADV
Active
GreenPAK Advanced Development Board
The GreenPAK™ Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK devices - for use with SLG46xxxX-SKT/SLG47xxxV-SKT socket kits.
It works in tandem with the GreenPAK Designer software (built into the Go Configure™ Software Hub), and it allows...
Recommended Documents:
Test This Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Development
SLG4SA-DIP
Active
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
Recommended Documents:
Development
SLG4DVKGSD
Active
GreenPAK Serial Debugger Board (GSD)
The GreenPAK™ Serial Debugger (GSD) device can be used for programming GreenPAK programmable mixed-signal matrix IC products with multiple-time non-volatile memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with an I²C interface. This...
Recommended Documents:
Development
SLG4DVKLITE
Active
GreenPAK Lite Development Board
The GreenPAK™ Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in conjunction with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters:
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
SLG46824 Back to defaults
I'm using the SLG46824 in our project. We have been in system programming the device by another microcontroller on the same PCB and all functions good. But now I like to test what happens if a factory default SLG46824 is on the board. Unfortunately, I can't find an ...
Apr 26, 2024 -
Field-Update of SLG46824/6 used as power sequencer
Dear Forum My intention is to use SLG4682x as power sequencer in our newest Zynq MPSoC design. Initial NVM programming will be done during production test through testpoints on I2C with the MPSoC unpowered. In the product, the I2C-bus is controlled by MPSoC as master and available only after ...
Jan 16, 2020 -
SLG468246 chip not detected in GreenPack designer
Hello, We’re using SLG468246 in our customized board, we’ve observed a strange behavior of the SLG, now the SLG chip is no more detected through the debugger in GreenPack software, it gives error like Chip is absent or placed incorrectly, as we've programmed this chip several times ...
May 7, 2024
FAQs
-
Q&A for GreenPAK Custom Part Order
... is 1 reel. Typically this is 3,000 units, with the exception of the below listed parts: Part Number MOQ SLG46620-AG 4000 SLG46620G 4000 SLG46824G 4000 SLG46826G 4000 SLG46880-AP 4000 SLG46538-AP 5000 SLG46625-AP 5000 SLG46827-AG 5000 SLG46855-AP 5000 SLG46880V 5000 SLG46881V 5000 SLG47004V 5000 ...
Jan 1, 1970 -
Are there MTP GPAKs?
Last Updated: 06/25/2025 Question: Are there MTP GPAKs? Answer: Yes, there are MTP GPAKs: SLG46824, SLG46826, SLG47004.
Jun 25, 2025