Up to 54 MHz operation and built-in remote control receiver and HDMI-CEC for linking to home appliances
The RX634 Group operates at single voltage supply of 3.3 V but also at 5 V and performs at up to 54 MHz CPU clock. The RX634 group memory lineup offers up to 2 MB code flash, 128 KB RAM and 32 KB Data flash embedded. RX634 is available in a 144-pin package. Compared to the RX630 group the RX634 added HDMI-CEC function and Remote Control Signal Receiver function which are typical required features for digital home appliances. At the same time RX634 has been feature optimized by removing CAN, USB and RTC function to suit the market needs even better. Therefore RX634 suits ideally as a multimedia devices group, due to feature set as well as high performance. In addition RX634 group incorporate multi function timer (MTU2) and high speed 12-bit A/D converter enable to hold 3 channels at the same timing, which are typically required for industrial motor control applications.
|Part Name||R5F5634ECDFB R5F5634DCDFB R5F5634BCDFB||R5F5634EYDFB R5F5634DYDFB R5F5634BYDFB|
|CPU||CPU||Maximum operating frequency: 54 MHz, 32-bit RXv1 CPU|
|FPU||Single precision (32-bit) floating point (in conformance with the IEEE754 standard)|
|Memory||Proguram Flash||Max 2 MB|
|Data Flash||32 KB|
|Clock||Main clock oscillator : 20 MHz
low-speed on-chip oscillator : 125 kHz
PLL frequency synthesizer
IWDT-dedicated on-chip oscillator Oscillation stop detection Measuring circuit for accuracy of clock frequency (clock-accuracy check)
|Reset||RES# pin reset, power-on reset, voltage monitoring reset, watchdog timer reset, independent watchdog timer reset, deep software standby reset, and software reset|
|External bus expansion||16 MB (CS0 to CS3)|
|Data transfer function||DMA||4 channels|
|DTC||transfer modes: Normal transfer, repeat transfer, and block transfer|
|Event link controller (ELC)||56 sources|
|Multi-function pin controller (MPC)||Supported|
|Timers||16-bit timer pulse unit||6 channels x 1 unit|
|Multifunction timer pulse unit||(16-bit x 6 channels) x 1 unit|
|Programmable pulse generator||(4 bits × 4 groups) × 1 unit|
|8-bit timer||2 channels × 2 units|
|Compare match timer||(16 bits × 2 channels) × 2 units|
|Watchdog timer||14-bit x 1 channel|
|Independent watchdog timer||14-bit x 1 channel|
|Communication functions||Serial communications interfaces||13 channels|
|I2C bus interface||3 channels|
|Serial peripheral interface||2 channels|
|CEC transmission / reception circuit||1 channel|
|Remote control signal receiver||2 channels|
|Analog||A/D Converter||12-bit resolution x (16 channels x 1 unit)|
|D/A Converter||10-bit resolution x 2 channels|
|Other features||CRC calculator (CRC)||CRC code generation for arbitrary amounts of data in 8-bit units|
|Data Operation Circuit (DOC)||Comparison, addition, and subtraction of 16-bit data|
|On-chip debug||Supported E1 emulator (JTAG and FINE interfaces) Supported E20 emulator (JTAG interface)|
|Power Supply Voltage||2.7 to 3.6 V||4.0 to 5.5 V|
|Operating ambient temperature||-40 to +85°C (products with wide-temperature-range spec.)|
|Packages||144-pin LQFP (PLQP0144KA-A)|
|My Renesas||Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.|
|e-learning||Information for studying and learning about microcontrollers and microprocessors.|
|FAQ||Frequently asked questions and useful hints for development.|
|Forum||A forum and community site to share technical information, questions and opinions with others who use Renesas products.|
Software Design Support
|e² studio||This integrated development environment (IDE) is based on the popular combination of the open-source Eclipse IDE and its CDT plug-in that enables C/C++ language development.
|CS+||This integrated development environment (IDE) can be used for coding, assembly, compiling, and simulation. CS+ is also included with starter kits.
|E2 emulator Lite||This entry-level on-chip debugging emulator provides functionality equivalent to that of the E1 emulator at a low price.|
|E2 emulator||This on-chip debugging emulator has advanced features that improve the efficiency of development. In addition to the basic functions from debugging to flash programming, this emulator supports hot plug-in and external triggers as standard items. This emulator also helps to reduce development time by downloading at high speeds (compared to the E1 emulator) and the ability to work in combination with various solutions such as the tuning of current drawn by systems under development.|
|E20 emulator||This on-chip debugging emulator has enhanced debugging facilities such as large-capacity tracing and real-time RAM monitoring when used in combination with RX600 and RX700 MCUs (this emulator provides debugging functionality equivalent to that of the E1 emulator for other MCUs).|
|E1 emulator||This on-chip debugging emulator is a standard model which provides basic debugging functions (production is to be discontinued at the end of December 2019).|
Hardware Design Support
|Resonator Information||Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.
For main clock resonators :
KYOCERA: Click here for RX634 oscillation evaluation result.
Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F5634 into the IC Part Number search box.
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.