The RX110 Group has the simplest lineup of the RX100 Series


RX110 Group microcontrollers have the simplest lineup of the RX100 Series. They have a small-capacity, low pin count lineup from 8 KB/8 KB to 128 KB/16 KB ROM/RAM, and 36 to 64 pins. A 12-bit A/D converter, timer, serial interface, and more are built into a small 4 × 4 mm package. The RX110 is suitable for sensor hub and other applications where small size and processing performance are demanded.


Key Features:

General registers: 32-bit x 16
Multiplier: 32-bit multiplier
Divider: Yes
Multiply-accumulator: Yes (two types: memory-to-memory operations and register-to-register operations)
Maximum operating frequency 32 MHz
Power supply voltage 1.8 to 3.6 V
Flash Program max. 128 KB
SRAM max. 16 KB
On-chip peripheral functions Transfer functions Data transfer controller (DTCa)
Timers Multi-function timer pulse unit 2: 16 bits x 4 channels (MTU2b)
Compare match timer (CMT): 16 bits x 2 channels x 1 unit
Realtime clock (RTCA): 48-pin and over: available; 40-pin: not available  
Communication functions Serial communications interface (SCIe): 2 channels
Serial communications interface (SCIf): 1 channel

I 2C bus interface (RIIC): 1 channel
Serial peripheral interface (RSPI): 1channel
Analog functions 12-bit A/D converter (S12ADb):64-pin: 14 channels; 48-pin: 10 channels; 40-pin: 8 channels;36-pin:7 channels
Safety functions Clock Frequency Accuracy Measurement Circuit (CAC)
Data Operation Circuit (DOC)
14 bits Independent watchdog timer (IWDTa)
CRC Calculator (CRC)
Clock Generation Circuit Main clock oscillator Sub-clock oscillator
Low-speed on-chip oscillator (LOCO)
High-speed on-chip oscillator (HOCO)
Dedicated on-chip oscillator for the IWDT
Others Multi-function Pin Controller (MPC)
Power-on Reset Circuit (POR)
Voltage Detection Circuit (LVD)
On-chip debugging function Yes (with trace function)
Low power consumption modes 3 modes
Sleep mode
Deep Sleep mode
Software standby mode
Packages PWLG0036KA-A (36-pin WFLGA, 4 x 4 mm, 0.5 mm pitch)
PLQP0048KB-A (48-pin LFQFP, 7 x 7 mm, 0.5 mm pitch)
PLQP0064KB-A (64-pin LFQFP, 10 x 10 mm, 0.5 mm pitch)
PLQP0064GA-A (64-pin LQFP, 14 x 14 mm, 0.8 mm pitch)
PWQN0040KC-A (40-pin HWQFN , 6 x 6 mm, 0.5mm pitch)
PWQN0048KB-A (48-pin HWQFN, 7 x 7 mm, 0.5 mm pitch)
PWLG0064KA-A (64-pin WFLGA, 5 x 5 mm, 0.5 mm pitch)

Pin Count / Memory Size Lineup:

Program Flash



Block Diagram:

RX110 Block Diagram

You can find an explanation of orderable part numbers here.

Resources for Software and Hardware

Title Description
My Renesas Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.
e-learning Information for studying and learning about microcontrollers and microprocessors.
FAQ Frequently asked questions and useful hints for development.
Forum A forum and community site to share technical information, questions and opinions with others who use Renesas products.


Software Design Support

Title Description
e² studio This integrated development environment (IDE) is based on the popular combination of the open-source Eclipse IDE and its CDT plug-in that enables C/C++ language development.
CS+ This integrated development environment (IDE) can be used for coding, assembly, compiling, and simulation. CS+ is also included with starter kits.
E2 emulator Lite This entry-level on-chip debugging emulator provides functionality equivalent to that of the E1 emulator at a low price.
E2 emulator This on-chip debugging emulator has advanced features that improve the efficiency of development. In addition to the basic functions from debugging to flash programming, this emulator supports hot plug-in and external triggers as standard items. This emulator also helps to reduce development time by downloading at high speeds (compared to the E1 emulator) and the ability to work in combination with various solutions such as the tuning of current drawn by systems under development.
E20 emulator This on-chip debugging emulator has enhanced debugging facilities such as large-capacity tracing and real-time RAM monitoring when used in combination with RX600 and RX700 MCUs (this emulator provides debugging functionality equivalent to that of the E1 emulator for other MCUs).
E1 emulator This on-chip debugging emulator is a standard model which provides basic debugging functions (production is to be discontinued at the end of December 2019).


Hardware Design Support

Title Description
IBIS/BSDL IBIS standard simulation data is required for high-speed board design and can be used to run simulations to examine and troubleshoot issues such as waveform reflection, ringing, and so on, before producing the actual board. BSDL is a data input format supported by most IEEE 1149.1 (JTAG)-compliant tools. The automatic test pattern generation (ATPG) and automatic test equipment functions of these tools facilitate testing.
Resonator Information Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.

For Main clock resonator :
KYOCERA: Click here for RX110 oscillation evaluation result.
Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F5110 into the IC Part Number search box.

For Sub clock resonator :
KYOCERA: Click here for RX110 oscillation evaluation result.
You can filter the sample codes and application notes that are displayed using the below filters.

Action Needed


The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.

Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.