概要
説明
The SLG46826 programmable mixed-signal matrix IC with in-system programmability provides a small, low-power component for commonly used mixed-signal functions. The user creates the circuit design by programming the multiple-time programmable non-volatile memory (NVM) to configure the interconnect logic, the IOs, and the macrocells of the SLG46826. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power single integrated circuit.
特長
- In-System Programmability
- Multiple-Time Programmable Memory
- Wide Range Power Supply
- 2.5V (±8%) to 5V (±10%) VDD
- 1.8V (±5%) to 5V (±10%) VDD2 (VDD2 ≤ VDD)
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Two High-Speed General-Purpose Rail-to-Rail Analog Comparators (ACMPxH)
- Two Low-Power General-Purpose Rail-to-Rail Analog Comparators (ACMPxL)
- Two Voltage References (Vref)
- Two Vref Outputs
- Eleven Combination Function Macrocells
- Three Selectable DFF/Latch or 2-bit LUTs
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Six Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
- Eight Multi-Function Macrocells
- Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters
- One Selectable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter
- Serial Communications: I2C Protocol Interface
- 2-Kbit (256 x 8) I2C-Compatible (2-Wire) Serial EEPROM Emulation with Software Write Protection
- Programmable Delay with Edge Detector Output
- Deglitch Filter with Edge Detector
- Three Oscillators (OSC)
- 2.048 kHz Oscillator
- 2.048 MHz Oscillator
- 25 MHz Oscillator
- Analog Temperature Sensor
- Power-On Reset (POR)
製品比較
アプリケーション
設計・開発
ソフトウェア/ツール
ソフトウェア/ツール
Software title
|
Software type
|
会社名
|
---|---|---|
Go Configureソフトウェアハブ Go Configure Software Hubは、GreenPAK構成可能なミックスド・シグナル・マトリクスやForgeFPGA™デバイスなど、さまざまな製品の開発サポートを提供します。
|
Software Package | ルネサス |
1件
|
ボード&キット
GreenPAK SLG46826 (STQFN-20) Development Kit with Socket Adapter
The SLG46826V-SKT includes the SLG4SA20SP-20x30 socket adapter and 50 SLG46826V (STQFN-20) samples.
GreenPAK SLG46826 20-Pin DIP Prototyping Board
The SLG46826V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
GreenPAK SLG46826 (TSSOP-20) Development Kit with Socket Adapter
The SLG46826G-SKT includes the SLG4SA20-65x64 socket adapter and 50 SLG46826G (TSSOP-20) samples.
Training Adapter Board for SLG46826
The SLG4TA20SP-SLG46826 is a training adapter board for the SLG46826 programmable mixed-signal matrix with in-system programmability.
GreenPAK先行開発ボード
GreenPAK先行開発ボードは、SLG46xxxX-SKT/SLG47xxxV-SKTソケットキットと使用することで、GreenPAKデバイスのプログラミング、エミュレーション、およびテスト機能など全てを提供します。
GreenPAK Designerソフトウェア( Go Configure™ Software Hubに組み込まれている)と連携して動作し、設計者は次のことが可能になります...
Test this Board Remotely
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with I²C interface. It is very helpful in the late stages of development...
GreenPAK Lite開発ボード
GreenPAK Lite開発ボードは、 Go Configure™ソフトウェアハブとペアで動作し、GreenPAKデバイスのプログラミング、エミュレーション、およびテストなど全ての機能を提供します。 ボードの機能は、ルネサスのRX66T MCUによって提供されます。
GreenPAK導入キット
SLG4DVKINTRO導入キットは、新規に開発を始めるお客様に最適です。。
GreenPAK導入キットには以下が含まれます。
- SLG4DVKADV GreenPAK先行開発ボード
- SLG4SA-DIPアダプタ(GreenPAK先行開発ボード用)
- 次のDIPプロトボード:
- 2x SLG46120V-DIP
- 2x SLG46721V-DIP
- 2x SLG46620V-DIP
- 2x SLG46537V-DIP
- 2x SLG46826V-DIP
- 1x SLG47105V-DIP
- 1x SLG47004V-DIP
- USBケーブル
GreenPAKイントロダクションキットライト
SLG4DVKLITEINTRO GreenPAK™イントロダクションキットは、GreenPAKプログラマブル・ミックスドシグナル製品で新規開発を開始するお客様に最適なキットです。
GreenPAKイントロダクションキットには以下が含まれます。
- USBケーブルでSLG4DVKLITE
- SLG46120V-DIP
- SLG46721V-DIP
- SLG46620V-DIP
- SLG46537V-DIP
- SLG46826V-DIP
- SLG47105V-DIP
- SLG47004V-DIP
- SLG47003V-DIP
- SLG47011V-DIP
- SLG46855V-DIP
コスト最適の機能セットを持つIO-Link デバイストランシーバー 評価ボード
CCE4503-EVAL-V3評価ボードは、 CCE4503 IO-Linkデバイス・トランシーバーの評価及びデモ用に開発されています。
このCCE4503は、デバイスサイドのIO-Link準拠トランシーバです。 小さく、シンプルにアプリケーションを維持しつつ、 IO-Linkに準拠した通信機能と高度な保護回路や追加機能を提供しています。
フレームハンドラ内蔵IO-Link Device PHY 評価ボード
CCE4502-EVAL-V4評価ボードは、フレームハンドラを内蔵した CCE4502 IO-LinkデバイスPHYの評価用に開発されています。
このCCE4502は、高集積デバイスIO-Link準拠トランシーバICです。 組み込みハードウェアベースIO-Linkフレームハンドラは、IO-Linkプロトコルのフル処理機能を提供し、UARTインターフェースを介してホストマイクロコントローラ(MCU)に簡単に接続できます。
GreenPAK Programmable Mixed-Signal Matrix Evaluation Board
The QCIOT-SLG46826POCZ evaluation board enables quick prototyping of the GreenPAK™ SLG46826V programmable mixed-signal matrix. The QCIOT-SLG46826POCZ board is a part of the QuickConnect Platform.
The SLG46826V provides a small, low-power component for commonly used mixed-signal functions. The...
モデル
ECADモデル
SamacSysの回路図シンボル、PCBフットプリント、および3D CADモデルは、製品オプションテーブルのCADモデルリンクをクリックすることで参照できます。シンボルまたはモデルが対応していない場合は、SamacSysに直接リクエスト可能です。

製品選択
適用されたフィルター