特長
- Input voltage 2.8V to 5.5V
- Four buck converters, 0.3V to 3.34V up to 2.5A
- Dual-phase mode up to 5A
- DDR VTT supply mode
- DVS support
- 3MHz switching frequency allows for the use of low-profile inductors and avoids the AM band
- Four LDO regulators, 0.9V to 3.6V up to 300mA
- Five GPIOs
- Coin cell/Super-capacitor charger
- 1.5µA RTC with alarm and wakeup
説明
DA9062-A is a PMIC optimized for supplying systems with single- and dual-core processors, I/O, DDR memory, and peripherals. The target application range covers entry-level automotive In-Vehicle Infotainment (IVI) systems and FPGA-based applications including navigation and automotive telemetrics.
DA9062-A features four buck converters providing a total current of 8.5A. High efficiency is achieved over a wide load range by automatically selecting Pulse Frequency Modulation (PFM) or Pulse Width Modulation (PWM) modes. All power switches are integrated, removing the need for external Schottky diodes. A high switching frequency allows low-profile inductors to be used. Buck1 and Buck2 can be used in a 5A dual-phase configuration and Buck4 can be used as a DDR VTT supply. Four LDO regulators with programmable output voltage are integrated and provide up to 300mA each. DA9062-A is available in automotive AEC-Q100 Grade 2.
パラメータ
| 属性 | 値 |
|---|---|
| Function | 8-ch PMIC |
| Outputs (#) | 8 |
| Input Voltage (Min) (V) | 2.8 |
| Input Voltage (Max) (V) | 5.5 |
| Switching Regulators | 4 |
| Switching Frequency (MHz) | 3 - 3 |
| GPIOs (#) | 5 |
| Comm. Interface | I2C |
| Advanced Features | Programmable Sequencing, WatchDog Timer, RTC with Coin Cell Battery/SuperCap Charger |
| Qualification Level | Automotive |
パッケージオプション
| Pkg. Type | Lead Count (#) | Pitch (mm) |
|---|---|---|
| 40-QFN | 40 | 0.5 |
アプリケーション
- Supply for single- and dual-core application processors; for example the i.MX™ families
- Power supply for FPGAs
- Automotive infotainment/dashboard
- Navigation systems
- Vehicle telemetrics
- Integrated cockpits
| Part Number | Status | Samples | Stock | Package | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Pb (Lead) Free |
|---|---|---|---|---|---|---|---|---|
| DA9062-XXAM1-A | Active | Available | Out of Stock | 40-QFN | 40# | Tray | 3 | Yes |
| DA9062-XXAM1-AT | Active | Available | Out of Stock | 40-QFN | 40# | Tray | 3 | Yes |
| DA9062-XXAMC-A | Active | Available | Out of Stock | 40-QFN | 40# | Tape & Reel | 3 | Yes |
| DA9062-XXAMC-AT | Active | Available | Out of Stock | 40-QFN | 40# | Tape & Reel | 3 | Yes |
- アプリケーションノート英語PDF 144 KB 2021年2月12日AI生成コンテンツ: Dialog Semiconductor mitigates single event transient (SET) risks caused by terrestrial cosmic rays in system PMICs and sub-PMICs by using design techniques such as redundancy in OTP memory cells and robust CMOS register architectures. The DA9063L-A device, built on a 250 nm CMOS process, demonstrates an extremely low soft error rate (SER) due to cosmic radiation, with failure rates far below other reliability concerns. Testing confirms no significant data corruption from electromagnetic interference (EMI) or electrostatic discharge (ESD). Overall, cosmic ray-induced soft errors contribute negligibly to device failure, ensuring high reliability in consumer and automotive applications.
- アプリケーションノート英語PDF 267 KB 2021年2月12日AI生成コンテンツ: IRQ line-sharing among multiple devices in Linux-based systems can cause unhandled interrupts, leading to kernel failures. When an IRQ remains unserviced, the Linux kernel disables the IRQ line, potentially affecting all devices sharing it. This behavior arises after a threshold of unhandled interrupts triggers a diagnostic message and disables the IRQ. Solutions include allocating dedicated IRQs, masking interrupts via OTP or bootloader, and managing driver installation order. Specific recommendations for PMIC devices like DA9210 and DA9063 address interrupt masks and fault log clearance to mitigate such issues.
- アプリケーションノート英語PDF 2.48 MB 2021年2月12日AI生成コンテンツ: Optimizing PCB layout is essential for reliable and high-performance integrated power management solutions. Key principles include maintaining low ground impedance through thick current-carrying traces, ground planes, and multiple vias. Sensitive signals must be shielded from noise, and power and ground planes should be placed under PMICs to minimize inductance. Specific layout guidelines address buck, boost converters, LDOs, and battery chargers. Examples from Dialog’s reference designs illustrate best practices. Design-in services are available to review schematics and layouts to enhance efficiency and reliability.
- アプリケーションノート英語PDF 229 KB 2020年4月14日AI生成コンテンツ: The document details the integration and power connection scheme between the DA9062 PMIC and Qualcomm Atlas7 SoC, focusing on power sequencing, GPIO mappings, and timing diagrams for various system states such as cold boot, warm boot, power-down, watchdog timeout, and temperature warnings. It explains the use of GPIO signals for controlling power rails and system resets, including watchdog kick and reboot functions. The document also covers software driver support and development tools for configuring the PMIC. Key elements include power rail current ratings, signal roles, and timing requirements essential for stable system operation.
- アプリケーションノート英語PDF 270 KB 2020年4月14日AI生成コンテンツ: The DA9061 and DA9062 manage power for the SAMA5D3 microprocessor series by providing efficient, low-power operation with integrated safety features such as temperature and voltage supervision. They support flexible power rail sequencing and use high-frequency buck converters to enable compact designs. The power supply requirements and sequencing for the SAMA5D3 are detailed, including regulator mappings and signal interconnections based on the SAMA5D3 Xplained Evaluation Kit. The DA9062 offers additional features like an extra buck converter, dual-phase buck capability, DDR VTT supply, real-time clock, and coin cell charger. Evaluation results and configuration guidelines ensure reliable MPU operation.
- アプリケーションノート英語PDF 637 KB 2020年4月14日AI生成コンテンツ: The DA9061/2 Developers’ Guide details the power management IC’s functional descriptions, including power states, device power modes, and wake-up events. It explains regulator configurations, thermal design, and parameter measurements. The guide offers practical application information such as PCB layout recommendations, regulator usage, and configuration via GUI software. It supports system developers in optimizing device settings for single- and dual-core systems and provides insights into fault handling, sequencing, and power transitions. The document also includes references and definitions to assist in comprehensive system design.
- アプリケーションノート英語PDF 149 KB 2020年4月14日AI生成コンテンツ: The document explains the behavior of DA906x power management ICs when tested with a slowly ramping supply voltage. It details how the device monitors VSYS voltage changes, including the generation of VDD_WARN and VDD_FAULT events during slow voltage ramps. The document highlights that during slow rising voltage, the device may repeatedly attempt to power up and shut down due to threshold checks. A workaround involves setting the M_VDD_WARN mask bit to allow proper testing until the system fully powers up. The note also compares normal and slow ramp scenarios with timing diagrams to clarify device responses.
推奨ドキュメント (1)
データシート (1)
マニュアル、ガイド (2)
- アプリケーションノート英語PDF 144 KB 2021年2月12日AI生成コンテンツ: Dialog Semiconductor mitigates single event transient (SET) risks caused by terrestrial cosmic rays in system PMICs and sub-PMICs by using design techniques such as redundancy in OTP memory cells and robust CMOS register architectures. The DA9063L-A device, built on a 250 nm CMOS process, demonstrates an extremely low soft error rate (SER) due to cosmic radiation, with failure rates far below other reliability concerns. Testing confirms no significant data corruption from electromagnetic interference (EMI) or electrostatic discharge (ESD). Overall, cosmic ray-induced soft errors contribute negligibly to device failure, ensuring high reliability in consumer and automotive applications.
- アプリケーションノート英語PDF 267 KB 2021年2月12日AI生成コンテンツ: IRQ line-sharing among multiple devices in Linux-based systems can cause unhandled interrupts, leading to kernel failures. When an IRQ remains unserviced, the Linux kernel disables the IRQ line, potentially affecting all devices sharing it. This behavior arises after a threshold of unhandled interrupts triggers a diagnostic message and disables the IRQ. Solutions include allocating dedicated IRQs, masking interrupts via OTP or bootloader, and managing driver installation order. Specific recommendations for PMIC devices like DA9210 and DA9063 address interrupt masks and fault log clearance to mitigate such issues.
- アプリケーションノート英語PDF 2.48 MB 2021年2月12日AI生成コンテンツ: Optimizing PCB layout is essential for reliable and high-performance integrated power management solutions. Key principles include maintaining low ground impedance through thick current-carrying traces, ground planes, and multiple vias. Sensitive signals must be shielded from noise, and power and ground planes should be placed under PMICs to minimize inductance. Specific layout guidelines address buck, boost converters, LDOs, and battery chargers. Examples from Dialog’s reference designs illustrate best practices. Design-in services are available to review schematics and layouts to enhance efficiency and reliability.
- アプリケーションノート英語PDF 229 KB 2020年4月14日AI生成コンテンツ: The document details the integration and power connection scheme between the DA9062 PMIC and Qualcomm Atlas7 SoC, focusing on power sequencing, GPIO mappings, and timing diagrams for various system states such as cold boot, warm boot, power-down, watchdog timeout, and temperature warnings. It explains the use of GPIO signals for controlling power rails and system resets, including watchdog kick and reboot functions. The document also covers software driver support and development tools for configuring the PMIC. Key elements include power rail current ratings, signal roles, and timing requirements essential for stable system operation.
- アプリケーションノート英語PDF 270 KB 2020年4月14日AI生成コンテンツ: The DA9061 and DA9062 manage power for the SAMA5D3 microprocessor series by providing efficient, low-power operation with integrated safety features such as temperature and voltage supervision. They support flexible power rail sequencing and use high-frequency buck converters to enable compact designs. The power supply requirements and sequencing for the SAMA5D3 are detailed, including regulator mappings and signal interconnections based on the SAMA5D3 Xplained Evaluation Kit. The DA9062 offers additional features like an extra buck converter, dual-phase buck capability, DDR VTT supply, real-time clock, and coin cell charger. Evaluation results and configuration guidelines ensure reliable MPU operation.もっと見る (8)
アプリケーションノート、ホワイトペーパー (8)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
図、設計ファイル (3)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
その他資料 (2)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
フィルター
適用されたフィルター
ソフトウェア/ツール
タイプでの検索
プロバイダでの検索
サンプルコード
アプリケーションでの検索
ファンクションでの検索
コンパイラでの検索
IDE に関するフィルタリング
シミュレーションモデル
Partner Solutions
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
ソフトウェア/ツール (4)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。