Features
- 2 high-speed general-purpose analog comparators (ACMPxH)
- 2 low-power general-purpose analog comparators (ACMPxL)
- 2 voltage references (Vref)
- 2 Vref outputs
- 15 combination function macrocells
- 3 selectable DFF/LATCH or 2-bit LUTs
- 1 selectable programmable pattern generator or 2-bit LUT
- 9 selectable DFF/LATCH or 3-bit LUTs
- 1 selectable DFF/LATCH or 4-bit LUTs
- 8 multi-function macrocells
- 7 selectable DFF/LATCH or 3-bit LUTs + 8-bit delay/counters
- 1 selectable DFF/LATCH or 4-bit LUT + 16-bit delay/counter
- Serial communications: I2C protocol interface
- Programmable delay with edge detector output
- Deglitch filter or edge detector
- 3 oscillators (OSC)
- 2.048kHz oscillator
- 2.048MHz oscillator
- 25MHz oscillator
- Analog temperature sensor
- Power-On Reset (POR)
- Read back protection (read lock)
- Power supply
- 2.5V (±8%) to 5.0V (±10%)
- Ambient operating temperature range: -40°C to +105°C
- RoHS-compliant/Halogen-free
- Available package: 14-pin STQFN: 1.6mm x 2.0mm x 0.55mm, 0.4mm pitch
Description
The SLG46855-E programmable mixed-signal matrix with extended temperature range provides a small, low-power component for commonly used mixed-signal functions. Users create their circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the IO pins, and the macrocells of the SLG46855-E. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power single integrated circuit.
Parameters
| Attributes | Value |
|---|---|
| Nominal VDD | 2.3 - 5.5 |
| GPIOs (#) | 12 |
| ACMP Channels (#) | 4 |
| CNT/DLY (Max) (#) | 8 |
| Look-up Table (LUTs) | 23 |
| D Flip-flops (DFFs) (#) | 21 |
| Pipe Delay | 16-stage |
| # of Programable Delays (#) | 1 |
| Oscillator Type | RC OSC, LF OSC, Ring OSC |
| Temperature Sensor (ch) (#) | 1 |
| Temp. Range (°C) | -40 to +105°C |
| Interface | I2C |
| Memory Type | OTP |
Package Options
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| TQFN | 1.6 x 2.0 | 14 | 0.4 |
Applications
- Outdoors electronics
- Factory automation
- E-bikes
- Power electronics
- EV charging stations
Renesas Boards & Kits
GreenPAK SLG46855-EV Development Kit with Socket Adapter
The SLG46855EV-SKT is a socket adapter kit for use with the SLG4DVKADV GreenPAK™ Advanced Development Board or SLG4DVKLITE GreenPAK Lite Development Board. The SLG46855EV-SKT kit includes the SLG4SA14-16x20 socket adapter and 50 SLG46855-EV GreenPAK programmable mixed-signal matrix IC... Read More
GreenPAK Advanced Development Board
The GreenPAK™ Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK programmable mixed-signal devices - for use with SLG46xxxX-SKT/SLG47xxxV-SKT socket kits.
The board works in tandem with the GreenPAK Designer software (built into the Go... Read More
Test This Board Remotely
GreenPAK Lite Development Board
The GreenPAK™ Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in conjunction with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
Support Communities
