Features
- CPU: RL78 core, Max. 32MHz
- Voltage: 1.7V to 5.5V
- Package: 64 to 100-pin QFP
- Memory: SRAM Max. 32KB, Program Flash Max. 512KB
Description
The RL78/I1C microcontroller integrates functions required for the metrology of smart electricity meters. It includes 24-bit ΔΣ A/D converters, 32-bit multiply-accumulator, independent power supply real-time clock, segment LCD driver supporting up to 8 com, and AES hardware engine that supports the DLMS standard. For single-phase two-wire meters, single-phase three-wire meters, and three-phase three-wire meters, 24-bit ΔΣ A/D converters (Max 4ch) are used for current and voltage sensing to achieve highly accurate power metrology.
Moreover, three-phase four-wire meters can be supported by the 100-pin QFP products, with ΔΣ A/D converters that are used for current sensing and a successive approximation A/D converter unit that is used for voltage sensing.
In addition, the products equipped with 512KB flash memory can also use the code flash area as two partitions, that is 256KB x 2 banks, independently. Thanks to the bank programming function in dual-bank mode and bank swapping, the system can update the firmware without stopping the metrology operation throughout the new firmware downloading and even the bank swapping period.
Parameters
Attributes | Value |
---|---|
Program Memory (KB) | 64, 128, 256, 512 |
Data Flash (KB) | 2 |
RAM (KB) | 6, 8, 16, 32 |
Carrier Type | Full Carton (Tray), Full Tray (Tray), Tape & Reel |
Supply Voltage (V) | - |
I/O Ports | 35, 52, 60, 68, 76 |
Temp. Range (°C) | Ta = -40 to +85 |
Operating Freq (Max) (MHz) | 24, 32 |
USB FS (host ch/device ch) | ( 0 / 0 ) |
SCI or UART (ch) | 3, 4, 5, 7 |
SPI (ch) | 2, 3 |
I2C (#) | 3, 4 |
CAN (ch) | 0 |
CAN-FD (ch) | 0 |
Wireless | No |
LIN (#) | 1 |
16-Bit Timer (ch) (#) | 8, 10 |
12-Bit A/D Converter (ch) | 0, 4, 6 |
10-Bit A/D Converter (ch) | 0, 4, 6 |
24-Bit Sigma-Delta A/D Converter (ch) | 3, 4 |
12-Bit D/A Converter (ch) | 0 |
10-Bit D/A Converter (ch) (#) | 0 |
8-Bit D/A Converter (ch) | 0 |
Capacitive Touch Sensing Unit (ch) | 0 |
Segment LCD Controller | Yes |
Security & Encryption | AES |
Application Block Diagrams
|
Smart Home Central Control Box
Smart home control box integrates devices, monitors conditions, and manages lighting and appliances.
|
|
Level 2 EV Charger Wall Box
Modular EV charger design with flexible communication, OTA updates, and simplified high-voltage power.
|
|
Swappable Battery Charging Kiosk
Swappable battery charging kiosk for LEVs offers reduced wait times, easy operation, and versatile functionality.
|
|
1-Phase Power Meter
Flexible, MCU-controlled, high-end 1-phase power meter for greater control and scalability.
|
|
1-Phase Static Meter
Low-power 1-phase static meter optimized for basic electronic metering needs.
|
|
Smart 1-Ph E-Meter
Flexible energy metering system with wired and wireless communications, tamper detection, and isolation support.
|
Additional Applications
- Metering
Applied Filters:
Filters
Software & Tools
Sample Code
Simulation Models
The easy-to-build RL78 Quick Solutions feature Renesas' ultra-low power RL78 MCUs and analog devices. These solutions showcase device combinations that improve design performance and power efficiency to support your product development.
News & Blog Posts
Blog Post
Feb 9, 2023
|