Features
- Drives N-channel MOSFET half-bridge
- Space saving DFN package
- DFN package compliant with 100V conductor spacing guidelines per IPC-2221
- Pb-free (RoHS compliant)
- Bootstrap supply maximum voltage to 114VDC
- On-chip 1Ω bootstrap diode
- Fast propagation times for multi-MHz circuits
- Drives 1nF load with typical rise/fall times of 16ns
- CMOS compatible input thresholds (ISL89400)
- 3.3V/TTL compatible input thresholds (ISL89401)
- Independent inputs provide flexibility
- No start-up problems
- Outputs unaffected by supply glitches, HS ringing below ground or HS slewing at high dV/dt
- Low power consumption
- Wide supply voltage range (9V to 14V)
- Supply undervoltage protection
- 4.0Ω typical output pull-up/pull-down resistance
Description
ISL89400, ISL89401 The ISL89400, ISL89401 are 100V, high frequency, half-bridge N-Channel power MOSFET driver ICs. They are based on the popular HIP2100, HIP2101 half-bridge drivers, but offer several performance improvements. The ISL89400 has additional input hysteresis for superior operation in noisy environments and the inputs of the ISL89401 (like those of the ISL89400) can now safely swing to the VDD supply rail. Finally, both parts are available in a very compact 9 Ld DFN package and an 8 Ld SOIC to minimize the required PCB footprint.
Applications
- Telecom Half-Bridge Converters
- Telecom Full-Bridge Converters
- Two-Switch Forward Converters
- Active-Clamp Forward Converters
- Class-D Audio Amplifiers
Renesas Boards & Kits
Renesas Flexible Motor Control Kit for RA6T2 MCU Group
The MCK-RA6T2 is a development kit that enables easy evaluation of motor control using permanent magnet synchronous motors (brushless DC motors). With this product and the sample code and QE for Motor that can be downloaded from the website, you can start evaluating motor control using the RA6T2... Read More
Renesas Flexible Motor Control Inverter Board – Low Voltage 48V/10A for Three-Phase BLDC/PMSM Motor
The MCI-LV-1 is a motor control inverter board that enables easy evaluation of motor control using a permanent magnet synchronous motor (brushless DC motor). By using it in combination with a compatible CPU board, you can start motor control evaluation right away.
Support Communities
-
What needs to be reconfigured in the FSP config when switching drivers from ISL89401AR3Z to HIP2211FR8Z?
I programmed an electric bicycle motor using the MCK-RA6T2 circuit (ISL89401AR3Z driver) in E2 Studio, and I adjusted the configuration parameters so the motor ran normally when the throttle was turned. However, when I switched to the HIP2211FR8Z driver, the wheels didn't rotate automatically when the throttle was ...
May 26, 2026 -
RTK0EM0000B12020BJ Hardware design
Hi everyone, We designed a new schematic based on the RTK0EM0000B12020BJ board to control the motor, but the kit we purchased is made in Japan and has one component that doesn't match the reference design: the HIP2211FR8Z. The actual kit has a different part, with the marking code 9401FDVG ...
Feb 5, 2026
Support Communities
