Features
- Can be used for an analog transceiver for the following interfaces:
- Universal Serial Bus Specification Revision 2.0
- Battery Charging Specification Revision 1.2
- Supports multi-port (1 or 2 ports are available)
- Technology is Samsung's 28nm Fully Depleted Silicon-on-Insulator (FD SOI) 8M process
- Supply voltage can be applied - 1.1V for overdrive of core voltage, 1.8V and 3.3V for I/O voltage
- USB transfer mode is High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps) modes
- A terminal resistance, pull-up resistor, and pull-down resistor are included
- Input reference clock is 48MHz, 30MHz, 24MHz, and 20MHz
USB 2.0 PHY for Multi-Port Transceiver IP (Samsung 28nm FD SOI 8M) Block Diagram
Description
Renesas' USB 2.0 transceiver is a useful analog multi-port transceiver hard macro for UTMI+ (USB 2.0 Transceiver Macrocell Interface +) Level 3. Fabricated using Samsung's 28nm Fully Depleted Silicon-on-Insulator (FD SOI) process, this macro can be configured to operate as a USB 2.0 peripheral or USB 2.0 host controller.
*1 Before purchasing or using any Renesas products, please refer to the latest product manual and/or datasheet in advance.
Parameters
| Attributes | Value |
|---|---|
| Protocol | USB 2.0 |
| Function | PHY, Transceiver |
| Process | Samsung 28nm FD SOI |
| Data Rate (Mbps) | 480, 12, 1.5 |
| Interface | UTMI+ |
| Number of Channels | 1 or 2 ports |
| Input Freq (MHz) | 48 - 48, 30 - 30, 24 - 24, 20 - 20 |
| Supply Voltage Range (V) | Core: 1.1V, I/O: 1.8 and 3.3V |
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Knowledge Base
Browse our knowledge base for helpful articles, FAQs, and other useful resources.
