Features
- Packaged as 16-pin TSSOP – Pb-free, RoHS compliant
- Eight addressable registers
- Replaces multiple crystals and oscillators
- Output frequencies up to 200 MHz at 3.3 V
- Input crystal frequency of 5 to 27 MHz
- Up to four reference outputs
- Up to two sets of two low-skew outputs
- Operating voltages of 3.3 V
- Controllable output drive levels
- Advanced, low-power CMOS process
Description
The 275 field programmable VCXO clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input. It is designed to replace crystals and crystal oscillators in most electronic systems. Using IDT's VersaClockTM software to configure PLLs and outputs, the 275 contains a One-Time Programmable (OTP) ROM for field programmability. Programming features include VCXO, eight selectable configuration registers and up to two sets of two low-skew outputs. Using Phase-Locked Loop (PLL) techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace VCXOs, multiple crystals and oscillators, saving board space and cost. The 275 is also available in factory programmed custom versions for high-volume applications.
Support Communities
-
Synergy™︎ MCU
Support Forum for Synergy Products
-
How to update the software over the air (SUOTA) with the SmartSnippets ?
Hi,Dialog! I recently doing SUOTA, use a DA14580 device that external SPI FLASH as SUOTA Initiato, and the SmartSnippets v3.6. I have the following problems: 1.How to open the SmartSnippets with UART/SPI mode?Is the use of DA14580 Dongle? 2.Now I open the SmartSnippets ...
Jun 1, 2015 -
UART Flash download failed
Dear Sir/Madam, We are testing the UART download of code via SmartSnippets for production preparation. We found it is very hard to burn the code via both JTAG and UART. We tried on 3 different types of board including our PCB board and the other 2 types of ...
Jun 8, 2015
Support Communities
