GreenPAK™ Programmable Mixed-signal Matrix
Jump to Page Section:
Overview
Description
The SLG46811 device offers an I2C serial communications bus and a new, multichannel sampling analog comparator, making SLG46811 the smallest GreenPAK that can sample up to four analog channels.
The SLG46811 offers digital macrocells, including shift registers and a long pattern generator block, that enable the device to generate master transactions for SPI, I2C, UART, and 1-wire. Also, small size and energy efficiency make the device ideal for a wide set of applications.
Features
- Read Back Protection (Read Lock)
- Power Supply: 2.5 V (±8 %) to 5 V (±10 %)
- Operating Temperature Range: -40°C to 85°C
- RoHS Compliant / Halogen-Free
Macrocells Overview
- Multichannel Sampling Analog Comparator (MS ACMP):
- Sampling up to Four Analog Channels;
- Selectable Voltage Reference for Each Channel;
- Different Sampling Scenarios;
- Synchronous or Asynchronous Result Appearance
- Integrated Voltage Reference
- Twelve Combination Function Macrocells:
- Two 2-Bit LUTs or (DFF/LATCH) Macrocells;
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Four 3-Bit LUTs or (DFF/LATCH) with Set/Reset
- Four Selectable DFF/LATCH or 3-bit LUTs or Shift Registers
- One 4-Bit LUT or (DFF/LATCH) with Set/Reset Macrocell
- Six Multi-Function Macrocells:
- Five Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters;
- One Selectable DFF/Latch or 3-bit LUT + 8-bit Delay/Counter/FSM;
- Extended Pattern Generator:
- Up to 8 Parallel Outputs;
- 92 bytes Pattern Stored in the NVM
- I²C Communication:
- Programmable Delay with Edge Detector Output;
- Deglitch Filter or Edge Detector;
- Two Oscillators (OSC):
- 2.048/10 kHz Oscillator;
- 25 MHz Oscillator;
- Analog Temperature Sensor;
- Power-On Reset (POR) with CRC.
Applications
Applications
- Smartphones and Fitness Bands
- Portable and Handheld Electronics
- Smart Meters
- Home Appliances and IoT
- Personal Computers and Servers
- PC Peripherals
- Data Communications Equipment
- Robotics
- Toys
- Applications with Communication Interfaces, Where GreenPAK Can be Used as a Simple master Device
Documentation
| Document title | Document type
|
Date Date | |
|---|---|---|---|
| PDF 2.50 MB | Datasheet | ||
| PDF 441 KB | Application Note | ||
| PDF 424 KB | Application Note | ||
| PDF 621 KB | Application Note | ||
| PDF 556 KB | Application Note | ||
| PDF 876 KB | Application Note | ||
| PDF 881 KB | Application Note | ||
| PDF 737 KB | Application Note | ||
| PDF 4.77 MB | Brochure | ||
| PDF 3.02 MB | Certificate | ||
| PDF 198 KB | Device Errata | ||
11 items
|
|||
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure™ Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
Boards & Kits
GreenPAK SLG46811 Development Kit with Socket Adapter
The SLG46811V-SKT includes the SLG4SA12-16x16 socket adapter and 50 SLG46811V samples.
GreenPAK SLG46811 20-pin DIP Prototyping Board
The SLG46811V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
Featured Documents:
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
GreenPAK DIP Adapter for GreenPAK Advanced Development Board allows the use of the SLG46xxxV-DIP Proto boards with the GreenPAK Advanced Development Board. Acts as the...
GreenPAK Advanced Development Board
Provides full programming, emulation, and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.
Working in tandem with the GreenPAK...
Featured Documents:
GreenPAK DIP Development Board
The SLG4DVKDIP is perfect for breadboarding and fast prototyping. Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers...
Featured Documents:
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect...
Featured Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
Product Options
This device is factory-configurable. Try the Custom Part Configuration Utility.
Processing table
| TQFN | Tape & Reel | Get Samples, |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
Support
play_circle_filledVideos & Training
GreenPAK Configurable Mixed-signal IC Introduction
Video List