Overview
Description
The SLG46811 programmable mixed-signal matrix IC offers an I2C serial communications bus and a multichannel sampling analog comparator, making it the smallest GreenPAK that can sample up to four analog channels.
The SLG46811 offers digital macrocells, including shift registers and a long pattern generator block, that enable the device to generate master transactions for SPI, I2C, UART, and 1-wire. Also, a small size and energy efficiency make the device ideal for a wide range of applications.
Features
- Read Back Protection (Read Lock)
- Power Supply: 2.5V (±8%) to 5V (±10%)
- Operating Temperature Range: -40°C to 85°C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Multichannel Sampling Analog Comparator (MS ACMP)
- Sampling up to Four Analog Channels
- Selectable Voltage Reference for Each Channel
- Different Sampling Scenarios
- Synchronous or Asynchronous Result Appearance
- Integrated Voltage Reference
- Twelve Combination Function Macrocells
- Two 2-Bit LUTs or (DFF/LATCH) Macrocells
- One Selectable Programmable Pattern Generator or 2-bit LUT
- Four 3-Bit LUTs or (DFF/LATCH) with Set/Reset
- Four Selectable DFF/LATCH or 3-bit LUTs or Shift Registers
- One 4-Bit LUT or (DFF/LATCH) with Set/Reset Macrocell
- Six Multi-Function Macrocells
- Five Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters
- One Selectable DFF/Latch or 3-bit LUT + 8-bit Delay/Counter/FSM
- Extended Pattern Generator
- Up to 8 Parallel Outputs
- 92 Bytes Pattern Stored in the Non-Volatile Memory (NVM)
- I²C Communication
- Programmable Delay with Edge Detector Output
- Deglitch Filter or Edge Detector
- Two Oscillators (OSC)
- 2.048/10kHz Oscillator
- 25MHz Oscillator
- Analog Temperature Sensor
- Power-On Reset (POR) with CRC
- Multichannel Sampling Analog Comparator (MS ACMP)
Comparison
Applications
Documentation
Featured Documentation
Log in required to subscribe
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 2.32 MB | |
| Application Note | PDF 634 KB | |
| Application Note | PDF 790 KB | |
| Application Note | PDF 558 KB | |
| Application Note | PDF 441 KB | |
| Application Note | PDF 424 KB | |
| Application Note | PDF 621 KB | |
| Application Note | PDF 876 KB | |
| Device Errata | PDF 198 KB | |
9 items
|
||
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
Development
SLG46811V-SKT
Active
GreenPAK SLG46811 Development Kit with Socket Adapter
The SLG46811V-SKT includes the SLG4SA12-16x16 socket adapter and 50 SLG46811V samples.
Recommended Documents:
Development
SLG46811V-DIP
Active
GreenPAK SLG46811 20-Pin DIP Prototyping Board
The SLG46811V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
Recommended Documents:
Development
SLG4DVKADV
Active
GreenPAK Advanced Development Board
The GreenPAK™ Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK devices - for use with SLG46xxxX-SKT/SLG47xxxV-SKT socket kits.
It works in tandem with the GreenPAK Designer software (built into the Go Configure™ Software Hub), and it allows...
Recommended Documents:
Test This Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Development
SLG4SA-DIP
Active
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
Recommended Documents:
Development
SLG4DVKGSD
Active
GreenPAK Serial Debugger Board (GSD)
The GreenPAK™ Serial Debugger (GSD) device can be used for programming GreenPAK programmable mixed-signal matrix IC products with multiple-time non-volatile memory (NVM) or for configuring the interconnect logic, the IOs, and the macrocells of all GreenPAK chips with an I²C interface. This...
Recommended Documents:
Development
SLG4DVKLITE
Active
GreenPAK Lite Development Board
The GreenPAK™ Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in conjunction with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters:
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
support SLG46811V STQFN-12 & SLG46826V STQFN-20 these Programmable Mixed-Signal Matrix components on XELTEK programmer
Dear Sir, I want to support SLG46811V and SLG46826V on our programmer. Can you help to order the OTP/MTP programming spec?
Nov 26, 2024 -
How to Program SLG46811V and Required Tools
Hi everyone, I'm currently working with the SLG46811V and would like to know the following: How do I program the SLG46811V? Do I definitely need a development board to program it? What software tools are required for programming? Which evaluation or development boards are compatible or recommended for working ...
May 27, 2025 -
SL46811V In Circuit Programming
I have been trying to program the SLG46811V with the I2C programmer (SLG4DVKGSD) and the advanced programmer (SLG4DVKADV) and neither seem to be able to program the IC in circuit, the only thing that works is the advanced programmer when the chip is placed in the socket.
Mar 3, 2022