GreenPAK SLG46537 (STQFN-20) Development Kit with Socket Adapter
The SLG46537V-SKT includes the SLG4SA20-20x30 socket adapter and 50 SLG46537V (STQFN-20) samples.
GreenPAK™ Programmable Mixed-signal Matrix with Asynchronous State Machine
Jump to Page Section:
Overview
Description
The SLG46537V/M provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the I/O Pins and the macro cells of the SLG46537V/M. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
Features
- Logic & Mixed Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- 1.8 V (±5%) to 5 V (±10%) Supply
- Operating Temperature Range: -40°C to 85°C
- RoHS Compliant / Halogen-Free
Macrocells Overview
- Four Analog Comparators (ACMP);
- Two Voltage References (Vref);
- Seventeen Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- One Selectable Continuous DFF/Latch or 3-bit LUT;
- Four Selectable DFF/Latch or 3-bit LUTs;
- One Selectable Pipe Delay or 3-bit LUT;
- One Selectable Programmable Pattern Generator or 2-bit LUT;
- Five 8-bit delays/counters or 3-bit LUTs;
- Two 16-bit delays/counters or 4-bit LUTs;
- Asynchronous State Machine:
- Eight States;
- Flexible input logic from state transitions;
- Serial Communications:
- I2C Protocol compliant;
- Pipe Delay – 16 stage/3 output (Part of Combination Function Macrocell);
- Programmable Delay;
- Additional Logic Functions – 2 Deglitch Filters with Edge Detectors;
- Two Oscillators (OSC):
- Configurable 25 kHz/2 MHz;
- 25 MHz RC Oscillator;
- Crystal Oscillator;
- Power-On-Reset (POR);
- Eight Byte RAM + OTP User Memory:
- RAM Memory space that is readable and writable via I2C;
- User defined initial values transferred from OTP;
- Analog Temperature Sensor.
Applications
Applications
- Personal Computers and Servers
- PC Peripherals
- Consumer Electronics
- Data Communications Equipment
- Handheld and Portable Electronics
Documentation
|
|
Date | |
|---|---|---|
| PDF 2.46 MB | Datasheet | |
| PDF 4.70 MB 简体中文 | Brochure | |
| PDF 3.02 MB | Certificate | |
| PDF 1002 KB | Device Errata | |
| PDF 1.03 MB | Application Note | |
| PDF 743 KB | Application Note | |
| PDF 1017 KB | Application Note | |
| PDF 1.65 MB | Application Note | |
| PDF 404 KB | Application Note | |
| PDF 441 KB | Application Note | |
| PDF 778 KB | Application Note | |
| PDF 937 KB | Application Note | |
| PDF 616 KB | Application Note | |
| PDF 382 KB | Application Note | |
| PDF 470 KB | Application Note | |
| PDF 558 KB | Application Note | |
| PDF 944 KB | Application Note | |
| PDF 660 KB | Application Note | |
18 items
|
||
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure™ Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
Boards & Kits
GreenPAK SLG46537 (STQFN-20) 20-pin DIP Prototyping Board
The SLG46537V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
Featured Documents:
GreenPAK SLG46537 (MSTQFN-20) 20-pin DIP Prototyping Board
The SLG46537M-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
Featured Documents:
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
GreenPAK DIP Adapter for GreenPAK Advanced Development Board allows the use of the SLG46xxxV-DIP Proto boards with the GreenPAK Advanced Development Board. Acts as the...
GreenPAK SLG46537 (MSTQFN-22) Development Kit with Socket Adapter
The SLG46537M-SKT includes the SLG4SA22-20x22 socket adapter and 50 SLG46537M (MSTQFN-22) samples.
GreenPAK™ Keypad Scanner Demonstration Board
The SLG4KPDSC-DMO is a keypad scanner demonstration board.
Using an MCU or SoC to scan a keypad is a less than ideal solution for human input. It often makes sense...
Featured Documents:
GreenPAK Introduction Kit
The SLG4DVKINTRO GreenPAK Introduction Kit is perfect for new customer evaluation.
GreenPAK Introduction Kit includes:
- SLG4DVKADV GreenPAK Advanced Development...
Featured Documents:
GreenPAK Advanced Development Board
Provides full programming, emulation, and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.
Working in tandem with the GreenPAK...
Featured Documents:
GreenPAK DIP Development Board
The SLG4DVKDIP is perfect for breadboarding and fast prototyping. Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers...
Featured Documents:
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect...
Featured Documents:
GreenPAK Lite Development Board
The GreenPAK Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in a pair with the Go Configure™ Software...
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
This device is factory-configurable. Try the Custom Part Configuration Utility.
Processing table
| TQFN | Tape & Reel | Get Samples, | |
| MSTQFN | Tape & Reel | Get Samples, |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
Support
Renesas Samples
This device is factory-configurable. Try the Custom Part Configuration Utility.
Select an orderable part number:
| Orderable Part ID | Sample |
|---|---|
| SLG46537M | Availability |
| SLG46537V | Availability |
Videos & Training
GreenPAK I2C
Video List