Features
- Inductive principle
- Rotation sensing up to a full turn of 360º
- SENT output with programmable limits
- Overvoltage, reverse polarity, ESD and short circuit protection
- 12-bit resolution
- Power or ground loss detection
- Facilitates redundant design requirements
- Programmable linearity correction
- Adaptive gain control supporting a wide range of coil designs
- Diagnostic features supporting ISO26262
- Supporting up to ASIL-B
- Overvoltage and reverse polarity protection up to ±18V
- Small 14-TSSOP package
ZMID5203 - Typical Application Circuit
Description
The ZMID5203 is an inductive position sensor IC with SENT output, used for absolute rotary and linear motion sensing in automotive applications. The ZMID5203 uses the physical principles of induction in a wire loop and Eddy currents to detect the position of a metallic target that is sliding or rotating above a set of coils, consisting of one transmitter coil and two receiver coils. The three coils are typically printed as copper traces on a printed circuit board (PCB). They are arranged such that the transmitter coil induces a secondary voltage in the receiver coils which depends on the position of the metallic target above the coils. After demodulating and processing the secondary voltages from the receiver coils, a signal representative of the metallic target’s position over the coils is obtained. The ZMID5203 is fully qualified to automotive standards AEC-Q100, grade 0 up to 150°C ambient temperature.
| Part Number | Status | Samples | Stock | Package | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Pb (Lead) Free | Pb Free Category | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|---|---|---|
| ZMID5203AE1R | NRND | Available | Out of Stock | TSSOP | 14# | Reel | 1 | Yes | e3 Sn | -40 to 150°C |
Loading
Filters
Applied Filters
Log in required to subscribe
- TrainingPDF 751 KB Jan 26, 2026An overview of the process for importing Gerber and drill data into Altium Designer, covering CAM document setup, parameter alignment, and adjustments made after PCB conversion. Essential post-import cleanup steps for pads, vias, and layout elements support accurate semiconductor sensor, coil, and chip-interface PCB designs.
- PCB Design FilesZIP 287 KB 20210910-rs-Gerber_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 142 KB 20210910-rs-Gerber_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 2.84 MB 20210910-rs-Altium_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 2.75 MB 20210910-rs-Altium_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- SchematicPDF 179 KB 20210910-rd-Schematic_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021
- SchematicPDF 132 KB 20210910-rd-Schematic_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- Application NotePDF 1.05 MB Mar 07, 2019AI-generated Summary: The document explains the switch fabric and polarity inversion mechanisms used to control the atan (CORDIC) calculation, enabling spatial angle expansion from 0-90° to 0-360°. It details three polarity inversion scenarios causing 90°, 180°, and 270° shifts in output angle. The CORDIC block converts rectangular coordinates to polar coordinates, expanding angle measurement. Linear mode operation requires specific register bit settings for monotonic sensor output, demonstrated using the ZMID5203 module with configuration examples.
- Manual - SoftwarePDF 554 KB 7WDXRDKU4E7E-5-63129 Aug 01, 2018
- Manual - SoftwarePDF 674 KB 7WDXRDKU4E7E-5-63172 Jul 23, 2018
- Manual - Development ToolsPDF 459 KB 7WDXRDKU4E7E-5-62822 Apr 04, 2018
Recommended Documents (1)
Datasheets (1)
- Manual - SoftwarePDF 554 KB 7WDXRDKU4E7E-5-63129 Aug 01, 2018
- Manual - SoftwarePDF 674 KB 7WDXRDKU4E7E-5-63172 Jul 23, 2018
- Manual - Development ToolsPDF 459 KB 7WDXRDKU4E7E-5-62822 Apr 04, 2018
- Manual - SoftwarePDF 1.01 MB 7WDXRDKU4E7E-5-62680 Feb 23, 2018
Manuals & Guides (5)
- Application NotePDF 1.05 MB Mar 07, 2019AI-generated Summary: The document explains the switch fabric and polarity inversion mechanisms used to control the atan (CORDIC) calculation, enabling spatial angle expansion from 0-90° to 0-360°. It details three polarity inversion scenarios causing 90°, 180°, and 270° shifts in output angle. The CORDIC block converts rectangular coordinates to polar coordinates, expanding angle measurement. Linear mode operation requires specific register bit settings for monotonic sensor output, demonstrated using the ZMID5203 module with configuration examples.
Application Notes & White Papers (1)
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
- PCB Design FilesZIP 287 KB 20210910-rs-Gerber_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 142 KB 20210910-rs-Gerber_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 2.84 MB 20210910-rs-Altium_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 2.75 MB 20210910-rs-Altium_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- SchematicPDF 179 KB 20210910-rd-Schematic_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021View More (6)
Schematics & Design Files (6)
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
- TrainingPDF 751 KB Jan 26, 2026An overview of the process for importing Gerber and drill data into Altium Designer, covering CAM document setup, parameter alignment, and adjustments made after PCB conversion. Essential post-import cleanup steps for pads, vias, and layout elements support accurate semiconductor sensor, coil, and chip-interface PCB designs.
- OverviewPDF 300 KB 7WDXRDKU4E7E-6-61193 Mar 31, 2018
Marketing Collateral (2)
Other (3)
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
Loading
Filters
Applied Filters
Software & Tools
Filter by Type
Filter by Provider
Sample Code
Filter by Application
Filter by Function
Filter by Compiler
Filter by IDE
Simulation Models
Partner Solutions
- Software & Tools - SoftwareZIP 22 KB 7WDXRDKU4E7E-5-63174 Aug 23, 2018
- PCB Design FilesZIP 2.75 MB 20210910-rs-Altium_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 142 KB 20210910-rs-Gerber_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 2.84 MB 20210910-rs-Altium_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 287 KB 20210910-rs-Gerber_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021
- Software & Tools - Evaluation SoftwareZIP 1.46 MB 7WDXRDKU4E7E-5-61563 Oct 09, 2019
- SchematicPDF 179 KB 20210910-rd-Schematic_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021
- SchematicPDF 132 KB 20210910-rd-Schematic_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- SimulatorThe Inductive Position Sensor Coil Optimizer supports the design, simulation, and automatic optimization of the sensing element.
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
- Software & Tools - SoftwareZIP 22 KB 7WDXRDKU4E7E-5-63174 Aug 23, 2018
- PCB Design FilesZIP 2.75 MB 20210910-rs-Altium_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 142 KB 20210910-rs-Gerber_ZMID4200-5200_SINGLE_TEMPLATE_V20 Sep 08, 2021
- PCB Design FilesZIP 2.84 MB 20210910-rs-Altium_ZMID4200-5200_DUAL_TEMPLATE_V20 Sep 08, 2021View More (10)
Software & Tools (10)
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
No Results Found.
Check Spelling
Make sure all keywords are spelled correctly.
Make sure all keywords are spelled correctly.
Adjust Keywords
Try fewer, different, or more general terms to vary your search.
Try fewer, different, or more general terms to vary your search.
Review Filters
If you have filters applied, consider deselecting some to broaden your results.
If you have filters applied, consider deselecting some to broaden your results.
Need help?
- Search our extensive knowledgebase, designed to help customers with their FAQs.
- Get help from our expert Renesas technical staff and community on our support forums.
News & Blog Posts
Support Communities
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Knowledge Base
Browse our knowledge base for helpful articles, FAQs, and other useful resources.
