Features
- Long creepage distance (15 mm MIN)
- High speed communication (15 Mbps)
- High temperature operation (-40 to +110 °C)
- High common mode (dv/dt) tolerant（CMH, CML = ±50 kV/μs MIN.）
- High isolation voltage（BV = 7500 Vr.m.s.）
- Low input drive current（IFHL = 3.8 mA MAX.）
- Low voltage power supply operation（VDD = 2.7 V~5.5 V）
- Low pulse width distortion（PWD = 20 ns MAX.）
- Ordering number of tape product:
RV1S9960ACCSP-10Yx#KC0：1000 pcs/reel - Pb free product
- Safety standards approval
UL ：UL1577, Double protection
CSA：CAN/CSA-C22.2 No.62368-1, Reinforced insulation
VDE：DIN EN 60747-5-5 (Option)
Description
The RV1S9960A is a photocoupler featuring high-speed switching up to 15Mbps with active low output logic which consist of an AlGaAs LED on the input side and an integrated circuit with a photodiode on the output. This product enables to low current operation on 3.3V/5V power supply with high noise-tolerant CMR:50kV/us min. and high temperature operation up to TA = 110°C in logic interface circuit.
Parameters
| Attributes | Value |
|---|---|
| Channels (#) | 1 |
| Data Speed (bps) | 15 Mbps |
| Output Type | CMOS |
| Absolute max. rated Power Supply Voltage (V) | 6 |
| Isolation Voltage (Vrms) | 7500 |
| IDDH max. (mA) | 2 |
| IDDL max. (mA) | 2 |
| VOL max. (V) | 0.1 |
| IFHL (Max) (mA) | 3.8 |
| tPHL/tPLH max. (ns) | 60/60 |
| SW PWD max. (ns) | 20 |
| CMTI min. (kV/µs) | 50 |
| Creepage Distance (mm) | 15 |
| Safety Standard UL (UL1577) | Approved |
| Safety Standard VDE (EN IEC 60747-5-5) | Approved |
| Safety Standard CSA (CAN/CSA C22.2 62368-1) | Approved |