概要

説明

The RC32504A is a small, low-power timing component designed to be placed immediately adjacent to a PHY, switch, ASIC or FPGA that requires several reference clocks with jitter performance less than 100fs. The RC32504A can act as a frequency synthesizer to locally generate the reference clock, a jitter attenuator to perform local clean-up and/or frequency translation of a centrally-supplied reference, a synchronous Ethernet equipment clock to perform passband filtering and clean-up of network-supplied references or as a DCO for frequency margining or OTN clock applications. 

特長

  • Jitter below 100fs RMS (10kHz to 20MHz)
  • Compliant with ITU-T G.8262 for synchronous Ethernet/OTN (EEC/OEC) and ITU-T G.8262.1 for enhanced synchronous Ethernet/OTN (eEEC/eOEC)
  • PLL core consists of fractional-feedback Analog PLL (APLL) which can optionally be steered by a Digital PLL (DPLL)
    • Operates from a 25MHz to 80MHz crystal or XO
    • APLL frequency independent of input/crystal frequency
    • Operates as a frequency synthesizer, jitter attenuator, synchronous equipment slave clock or Digitally Controlled Oscillator (DCO)
    • DPLL loop filter programmable from 0.1Hz to 12kHz
    • DCO has tuning granularity of < 1ppb
  • Programmable input buffer supports HCSL, LVDS, or two LVCMOS with no external terminations needed
    • Input frequencies: 1MHz to 800MHz (250MHz for LVCMOS)
    • Reference monitor qualifies/disqualifies input clock
  • Programmable status output
  • 4 differential/8 LVCMOS outputs
    • Any frequency from 10MHz to 1GHz (180MHz for LVCMOS)
    • Programmable output buffer supports HCSL (DC-coupled), LVDS/LVPECL/CML (AC-coupled) or two LVCMOS
    • Differential output swing is selectable: 400mV to 800mV
    • Output clock phase individually adjustable in 100ps steps
    • Output Enable input with programmable effect
  • Supports up to 1MHz I2C or up to 20MHz SPI serial processor port
  • Can configure itself automatically after reset through internal customer-definable One-Time Programmable (OTP) memory with up to four different configurations
  • 4 × 4 mm 24-VFQFPN package

ドキュメント

分類
日付
PDF 2.82 MB データシート
PDF 91 KB アプリケーションノート
PDF 1.16 MB アプリケーションノート
PDF 872 KB 概要
PDF 1.53 MB マニュアル-ソフトウェア
PDF 1.99 MB アプリケーションノート
PDF 377 KB アプリケーションノート
PDF 129 KB アプリケーションノート
PDF 256 KB アプリケーションノート
PDF 433 KB アプリケーションノート
PDF 1.22 MB マニュアル-ソフトウェア
XLSX 482 KB その他資料
PDF 80 KB ガイド
PDF 15.98 MB レポート
PDF 353 KB アプリケーションノート
PDF 395 KB アプリケーションノート
PDF 170 KB アプリケーションノート
PDF 495 KB アプリケーションノート
PDF 442 KB アプリケーションノート
PDF 115 KB アプリケーションノート
PDF 233 KB アプリケーションノート
PDF 131 KB アプリケーションノート
PDF 180 KB アプリケーションノート
PDF 160 KB アプリケーションノート
PDF 120 KB アプリケーションノート
PDF 143 KB アプリケーションノート
PDF 565 KB アプリケーションノート
PDF 136 KB アプリケーションノート
PDF 202 KB アプリケーションノート
PDF 438 KB アプリケーションノート
PDF 108 KB アプリケーションノート
31 items

設計・開発

ソフトウェア/ツール

ソフトウェア/ツール

Software title
Software type
会社名
Renesas IC Toolbox (RICBox)
Renesas IC Toolbox(RICBox)ソフトウェアプラットフォームは、ソフトウェアを実行するコンピュータに接続することで、評価キット上のルネサスデバイスをお客様が設定することを可能にします。
Software Package ルネサス
1 item

ボード&キット

ボード&キット

モデル

モデル

分類 日付
ZIP 28 KB モデル-IBIS
1 item
Lab on the Cloud Demo for FemtoClock®2 Ultra-Low Phase Noise Synthesizer and Jitter Attenuator

Demonstration of Renesas’ Lab on the Cloud virtual environment for FemtoClock®2 ultra-low phase noise synthesizer and jitter attenuator.