メインコンテンツに移動

特長

  • 3相ブリッジ構成で6個のNチャンネルMOSFETを独立駆動
  • 最大ブートストラップ電圧:DC95V、バイアス電圧:7V〜15V
  • 1.25A(ピーク)のターンオフ電流
  • ユーザーによるデッドタイムの設定が可能(0.5μs~4.5μs)
  • ブートストラップとオプションのチャージポンプにより、ハイサイド・ドライバ・バイアス電圧を維持
  • ブートストラップ・リフレッシュ時間をプログラム可能
  • 立ち上がり時間20ns、立ち下がり時間10nsで1000pFの負荷を駆動
  • 不足電圧設定値をプログラム可能

説明

HIP4086とHIP4086A(以下、HIP4086/A)は3相NチャンネルMOSFETドライバです。両製品とも、特にPWMモータ制御をターゲットにしています。これらのドライバはあらゆるスイッチの組み合わせを駆動するための柔軟な入力プロトコルを備えています。また、スイッチドリラクタンスアプリケーション用のシュートスルー保護を無効にすることも可能です。HIP4086/Aは、プログラム可能なデッドタイムの範囲が広く(0.5μs~4.5μs)、モータ駆動に通常使用される低周波数(最大100kHz)に非常に適しています。HIP4086とHIP4086Aの唯一の違いは、HIP4086Aは内蔵のチャージポンプが無効化されていることです。これは、非常に静かなEMI性能を必要とするアプリケーションで有効です(チャージポンプは10MHzで動作します)。対して、HIP4086の利点は内蔵チャージポンプにより、ハイサイドドライバをオンにする時間を無制限に長くできることです。電源投入前にハイサイドドライバのブート・キャパシタが完全に充電されていることを確認するために、VDDが最初に印加された時にプログラム可能なブートストラップ・リフレッシュ・パルスがアクティブになります。このリフレッシュパルスがアクティブになると、3つのローサイドブリッジFETをすべてオンにする一方、3つのハイサイドブリッジFETをオフにして、ハイサイドブートコンデンサを充電します。リフレッシュパルスがクリアされた後、通常の動作が開始されます。HIP4086/Aのもう1つの便利な機能は、不足電圧設定値がプログラム可能であることです。設定値の範囲は6.6Vから8.5Vです。

パラメータ

属性
Function 3-Phase MOSFET Driver
Input Voltage Range (V) 7 - 80
Input Voltage (Max) (V) 95
VBIAS (Max) (V) 15
Quiescent Current 40 µA
ISOURCE (Max) (mA) 500
ISINK (Max) (mA) 1100
Internal Buck Regulator No
Gate Drive (V) 15
Internal Auxiliary Power No
Adaptive Dead Time No
VOUT Slew-rate Control No
Charge Pump Yes
Intern Gain Amplifiers No
Internal Sample & Hold No
Input Control HI/LI
Input Logic Level 3.3V/TTL
Advanced Fault Protection Yes
Qualification Level Standard

パッケージオプション

Pkg. Type Pkg. Dimensions (mm) Lead Count (#) Pitch (mm)
SOICW 15.4 x 7.5 x 0.00 24 1.3

アプリケーション・ブロック図

Multi-Functional Cordless Drill with Wire Detection Block Diagram
電線検出機能付き多機能コードレスドリル
IoTを備えたコードレスドリル設計により、電線検出、Bluetooth制御、角度調整、視認性の向上が可能になります。
48V BLDC Motor Position Control Block Diagram
48V BLDC モータ位置制御
正確な制御、迅速なウェイクアップ、シームレスなコンポーネント統合を備えた効率的なBLDCモータシステム。

その他アプリケーション

  • ブラシレスモータ(BLDC)
  • 3相ACモータ
  • スイッチドリラクタンスモータドライブ
  • バッテリー駆動の自動車
  • バッテリー駆動の工具

適用されたフィルター

This video discusses the HIP4086, 80V, 500mA, 3-Phase MOSFET Driver, at APEC 2013.

Transcript

Hello my name is Evan Jian. Today, I'm at APEC conference 2013 to introduce you to the HIP4086 BLDC three-phase motor drive demonstration board. This demonstration board provides you with a reference design for ebikes, battery powered tools and other applications using three-phase BLDC motor drive. The HIP4086 bridge FET drivers can independently control six-channel N-MOSFETs and also are specifically designed for low noise and improved EMI application. It has very low quiescent currents as well as fast turn on and turn off speed to reduce switch loss and improve efficiency. Also the device is very easy to configure. It provides the use of programmable UVL, dead time, bootstraps, refresh time, and so on.

This demonstration board has all sensors in supporting all possible switching logic. It has 5V buck regulators and 12V regulators to provide power for the MOSFET drivers and the microcontrollers and all sensors on this board. The reference design has a pre-programmed open loop control for the three-phase BLDC motor drive. It also provides an interface for users to modify the program.

Now, I'm going to demonstrate the functions of the demo board. There are four functions of this board. First we have start and stop function, if I push this button the motor will start to spin and there's a potential meter on this board but we can use a screw driver to adjust the motor spinning speed, speed up and speed down. You push the start stop button the motor will gradually slow down and then stop, start again. The second button is reverse function so I push this reverse function button the motor will gradually slow down and then reverse the rotating direction. Another button is the brake. I press it and immediately stop and the fourth button is reset. I push the reset button, the program in the microcontroller resets.

Thank you for watching this video.