Features
- Optimized for high-current point-of-load applications
- Input voltage range: 0.85V ≤ VD1, VD2 ≤ VDD
- 40mΩ RDSON while supporting 1.0A
- Output voltage slew-rate control by resistor
- Over-temperature protection
- Output discharge circuitry
SLG59M1446V
Description
The SLG59M1446V GreenFET dual N-channel load switch is designed for load switching applications. The part comes with two 40mΩ 1.0A rated MOSFETs, each controlled by an ON control pin. The ramp rate of each MOSFET is adjustable depending on the input current level of the ON pin. The product is packaged in an ultra‑small 1.6mm x 1.0mm package.
Parameters
| Attributes | Value |
|---|---|
| FET Pass Device Type | Dual N-Channel |
| VDD min. (V) | 2.5 |
| VDD max. (V) | 5.5 |
| VIN Channel 1 min. (V) | 0.85 |
| VIN Channel 1 max. (V) | 5.5 |
| Input Quiescent Current Channel 1, typ (µA) | 35 |
| Input Quiescent Current Channel 1, max (µA) | 50 |
| Input Quiescent Current when OFF Channel 1, typ (µA) | 0.1 |
| Input Quiescent Current when OFF Channel 1, max (µA) | 1 |
| RDSON (Typ) Channel 1 (mΩ) | 40 |
| IDS Channel 1 (A) | 1 |
| Enable | Active High |
| Output Voltage Slew Rate set by | Resistor |
| Discharge Circuit | Yes |
| Undervoltage Protection | No |
| Over Voltage Protection | No |
| Power Good (PG), FAULT indicator | No |
| Reverse current blocking | No |
| Reverse voltage detection | No |
| Over Current Protection (OCP) | No |
| Short Circuit Protection | No |
| Over Temperature Protection (OTP) | Yes |
| Current Monitor Output | No |
| Internal TVS Surge Protection | No |
| Temp. Range (°C) | -40 to +85°C |
Renesas Boards & Kits
SLG59M1446V-EVB
Active
SLG59M1446V Evaluation Board
The SLG59M1446V-EVB board evaluates the SLG59M1446V GreenFET, Single N-Channel, Load Switch.
For details on how to use the evaluation board, please refer to the evaluation board user manual included in the datasheet.
Recommended Documents:
Partner Boards & Kits
SoM/SBC
V2N System on Module (SoM)
Provides a cost‑effective embedded module powered by the Renesas RZ/V2N processor for AI‑driven vision applications. It supports two four‑lane MIPI CSI‑2 connections, enabling concurrent attachment of up to four cameras. Customization options include onboard Wi‑Fi® and Bluetooth®, configurable memory and storage capacities, and flexible physical layer settings. The module delivers a compact form factor, enhanced security features, and an integrated hardware and software solution supporting modular system design.
Provided By:
IMDT
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Knowledge Base
Browse our knowledge base for helpful articles, FAQs, and other useful resources.
