Overview
Description
The SLG46140 is a one-time programmable (OTP) non-volatile memory (NVM) mixed-signal matrix designed to implement a wide variety of mixed-signal functions in a single, small, low-power device by integrating a number of common discrete ICs and passive components. In addition to the integrated analog and digital components, the SLG46140 comprises an internal connection matrix and one-time programmable NVM. By programming the NVM, using the easy-to-use GreenPAK development tools, the designer configures the connection matrix, I/O pins, and integrated components of the SLG46140.
Features
- Logic and Mixed Signal Circuits
- Highly Versatile Macrocells
- 1.8V (±5%) to 5V (±10%) Supply
- Operating Temperature Range: -40 °C to 85 °C
- RoHS-Compliant/Halogen-Free
- Pb-Free
- Macrocells Overview
- 8-bit Successive Approximation Register Analog-to-Digital Converter (SAR ADC)
- ADC 3-bit Programmable Gain Amplifier (PGA)
- Two Digital-to-Analog Converters (DAC)
- Two Analog Comparators (ACMP)
- Voltage Reference (Vref)
- Eight Combinatorial Lookup Tables (LUTs)
- Four 2-bit LUTs
- Four 3-bit LUTs
- Nine Combination Function Macrocells
- One 14-bit Delay/Counter (Wake-Sleep Control)
- Two Selectable DFF/Latch or 2-bit LUTs
- Two Selectable DFF/Latch or 3-bit LUTs
- One Selectable 16-Stage/3-Output Pipe Delay or 3-bit LUT
- One 8-bit Delay/Counter/Finite State Machine
- One 14-bit Delay/Counter/Finite State Machine
- One Selectable Pattern Generator or 4-bit LUT
- Three Digital Comparators/Pulse Width Modulators (DCMPs/PWMs) with Selectable Deadband
- Three Counters/Delays (CNT/DLY)
- One 14-bit Delay/Counter/Finite State Machine
- One 14-bit Delay/Counter
- One 8-bit Delay/Counter
- Two D Flip-flops/Latches
- Programmable Delay with Edge Detection
- Three Internal Oscillators
- Low-Frequency
- Ring
- RC 25kHz and 2MHz
- Power-On Reset (POR)
- Slave SPI
- One Bandgap
Comparison
Applications
Design & Development
Software & Tools
Software & Tools
| Software title
|
Software type
|
Company
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | Renesas |
1 item
|
||
Boards & Kits
Development
SLG46140V-SKT
Active
GreenPAK SLG46140 Development Kit with Socket Adapter
The SLG46140V-SKT includes the SLG4SA14-16x20 socket adapter and 50 SLG46140V samples.
Recommended Documents:
Development
SLG46140V-DIP
Active
GreenPAK SLG46140 20-Pin DIP Prototyping Board
The SLG46140V-DIP 20-pin DIP prototyping board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced Development Board.
Recommended Documents:
Development
SLG4DVKADV
Active
GreenPAK Advanced Development Board
The GreenPAK™ Advanced Development Board provides full programming, emulation, and testing functions for the GreenPAK devices - for use with SLG46xxxX-SKT/SLG47xxxV-SKT socket kits.
It works in tandem with the GreenPAK Designer software (built into the Go Configure™ Software Hub), and it allows...
Recommended Documents:
Test This Board Remotely
Available on Lab on the Cloud, use our PC-based GUI to instantly start configuring and testing designs in our virtual lab, no physical board needed.
Development
SLG4SA-DIP
Active
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK™ DIP Adapter for the GreenPAK Advanced Development Board allows for using the SLG46xxxV-DIP and SLG47xxxV-DIP prototyping boards with the GreenPAK Advanced Development Board. It acts as the bridge between the advanced and DIP development platforms.
Recommended Documents:
Development
SLG4DVKLITE
Active
GreenPAK Lite Development Board
The GreenPAK™ Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in conjunction with the Go Configure™ Software Hub. Board functionality is provided by the RX66T MCU from Renesas.
Recommended Documents:
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Models
| Model - Other | ZIP 9.81 MB | |
1 item
|
||
Product Options
Applied Filters:
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
SLG46140V unprogrammed devices
Hi, We have a development kit for these parts. We're building a prototype board and would like to put a greenpak chip down on the board. Is it possible to reprogram these devices in-circuit once they are soldered down to the board? Is there an appnote you can ...
May 5, 2022 -
SLG46140 ADC to SPI
Hi, For SLG46140, looking at the example: AN-CM-299 SPI Digital ISDN Telephone Handset The SPI Byte Selection is set on [15:0], while the datasheet states "In parallel to serial mode (P2S) there is an additional configuration of the length of converted code – 8-bit and 16-bit ...
Dec 1, 2023 -
SLG46140 current sense using the PGA
Hi, Looking at the GreenPak Cookbook page 55: IN+ and IN- are connected to a shunt resistor to sense the load current, supposed that the load voltage is 5V, would this example work? noting that in the datasheet, page 35, Vinn Max is 1250mV, does that mean that the current ...
Dec 8, 2023
Videos & Training
GreenPAK SPICE Introduction
Video List
