Overview
Description
The ISL75054SLH is a radiation hardened low-dropout linear regulator with ultra-low noise and high PSRR used as a power supply for ADC and RF applications. It has an operating supply voltage range of 2.7V to 30V and an output voltage range of 0.5V to VIN - VDO. The device supplies up to 1.0A of current at a typical 387mV dropout voltage. Built-in protection includes foldback, internal and externally programmable current limit, and over-temperature protection. The ISL75054SLH features excellent noise performance and PSRR for radiation hardened LDOs, with an ultra-low RMS noise of 3.9μVRMS from 10Hz to 100kHz and an ultra-high PSRR of 104dB at 120Hz.
The ISL75054M is offered in a 10-lead ceramic flatpack (CFP) package and die form, and operates across the full military temperature range of -55°C to +125°C.
Features
- Qualified for Renesas Radiation Hardened Screening and QCI Flow (R34TB0001EU)
- Ultra-low RMS noise: 3.9μVRMS from 10Hz - 100kHz
- Ultra-low spot noise: 11.5nV/√Hz at 10kHz
- Ultra-high PSRR
- 104dB at 120Hz, 71dB at 10kHz, 39dB at 100kHz, 28dB at 1MHz, and 27dB at 10MHz
- Maximum output current: 1A
- Input voltage range
- 2.7V to 30V
- 2.7V to 27V (LET = 86MeV•cm2/mg)
- Output voltage range (VOUT): 0.5V to VIN - VDO
- Low-dropout voltage (VDO): 387mV with IOUT = 1A
- Output voltage adjustability using a single resistor
- Programmable and internal ILIM with foldback
- TID rad hard assurance (RHA) Testing
- LDR: ≤10mrad(Si)/s: 75krad(Si)for
- SEE Characterization
- No DSEE for VIN = 27V at 86MeV•cm2/mg
- SEFI <2.5μm2 at 86MeV•cm2/mg
- VOUT SET <2% at 86MeV•cm2/mg
Comparison
Applications
Documentation
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 2.82 MB | |
| Report | PDF 677 KB | |
| Technical Brief | PDF 340 KB | |
| Application Note | PDF 224 KB | |
4 items
|
||
Design & Development
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
