Overview
Design & Development
Software & Tools
Sample Code
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
115,2kbps on SCI5, H8SX/1668R
I'm using H8SX/1668R with P_CLK 24MHz (B_CLK = I_CLK = 48MHz, MD_CLK = 0, Qext = 12MHz) and try to set SCI5 to 115,2kbps using average transfer rate .So I set SCI5.SMCR.BIT.CKE = 2 and SCI5.SEMR.BYTE = 0x08. But the resulting baudrate is ...
Mar 15, 2010 -
FreeRTOS can't start without JTAG (E10A)
Hi, guys!big problem!my h8sx/1668 can start FreeRTOS scheduler only if JTAG (E10A) is connected. Otherwise, it stops without RTOS's start.What does it mean?(if you can, double your answer to [email protected] )Thanks!
Jul 14, 2012
FAQs
-
(H8SX) Is it possible to set φ output pin as I/O port output pin?
No. φ output pin cannot be set as I/O port output pin. (There is no alternative settings.)
Dec 25, 2008 -
Do the I/O buffer of SDA and SDL terminals need to valid for IIC function?
I/O port input buffer control register (ICR) needs to be valid. If you use it as an input pin of peripheral module, set the corresponded bit to 1. If you don't use it as an input pin or if you write the bit corresponded to analog input ...
Dec 25, 2008 -
What is the feedback resistance (Ω) of the oscillating circuit?
The feedback resistance of the oscillating circuit is 1 MΩ or more.
Mar 11, 2008