Features
- True Dual-Ported memory cells which allow simultaneous reads of the same memory location
- 7006 easily expands data bus width to 16 bits or more
- Interrupt Flag
- On-chip port arbitration logic
- Full on-chip hardware support of semaphore signaling between ports
- Fully asynchronous operation from either port
- Battery backup operation—2V data retention
- TTL-compatible, single 5V (±10%) power supply
- Available in 68-pin PGA, quad flatpack, PLCC, and 64-pin TQFP packages
- Industrial temperature range (-40C to +85C) is available
Description
The 7006 is a high-speed 16K x 8 Dual-Port Static RAM designed to be used as a stand-alone 128K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. An automatic power down feature controlled by CE permits the on-chip circuitry of each port to enter a very low standby power mode. Military grade product in compliance with MIL-PRF-38535 QML is available.
Parameters
| Attributes | Value |
|---|---|
| Core Voltage (V) | 5 |
| Bus Width (bits) | 8 |
| Density (Kb) | 128 |
| Pkg. Code | PLG68, PNG64 |
| Interface | Async |
| I/O Type | 5.0 V TTL |
| Access Time (ns) | 15, 20 |
| Temp. Range (°C) | -40 to 85°C, 0 to 70°C |
| Architecture | Dual-Port |
| Organization | 16K x 8 |
| Function | Busy, Interrupt, Master, Semaphore, Slave |
Support Communities
-
sprintf with float?
Actually I'm not able to get the correct ouput, formating a float number, not knowing what's going wrong: (no problems when using int, DWORD and strings) #include
Aug 26, 2016void func(void) { char c[25]; float f = 2.5; sprintf(c, "%5.2f", f );. } expected output: " 2 ... -
RCAR-S4 board [RTP8A779F4ASKB0SC2S] reboot frequently with AutoSD nightly image
... false positive?) [ 64.163394] rcu: (detected by 7, t=6006 jiffies, g=-887, q=1865 ncpus=8) [ 74.198615] rcu: rcu_preempt kthread starved for 7006 jiffies! g-887 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=6 [ 74.198623] rcu: Unless rcu_preempt kthread gets sufficient CPU time ...
Aug 1, 2025 -
Issue with Smartsnippet for firmware download with Jlink
Dear Support, We use the SDK 3.0.6. We are in our first product series and get a big issue for burning the OTP on the panasonic modules. We try to burn our modules using a Jlink accross Smartsnippets in command lines (bute get the same issue using smartsnippets ...
Dec 19, 2015
Support Communities
