Skip to main content

Overview

Description

The 7006 is a high-speed 16K x 8 Dual-Port Static RAM designed to be used as a stand-alone 128K-bit Dual-Port RAM or as a combination MASTER/SLAVE Dual-Port RAM for 16-bit-or-more word systems. An automatic power down feature controlled by CE permits the on-chip circuitry of each port to enter a very low standby power mode. Military grade product in compliance with MIL-PRF-38535 QML is available.

Features

  • True Dual-Ported memory cells which allow simultaneous reads of the same memory location
  • 7006 easily expands data bus width to 16 bits or more
  • Interrupt Flag
  • On-chip port arbitration logic
  • Full on-chip hardware support of semaphore signaling between ports
  • Fully asynchronous operation from either port
  • Battery backup operation—2V data retention
  • TTL-compatible, single 5V (±10%) power supply
  • Available in 68-pin PGA, quad flatpack, PLCC, and 64-pin TQFP packages
  • Industrial temperature range (-40C to +85C) is available

Comparison

Applications

Documentation

Design & Development

Models

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.

Diagram of ECAD Models

Models

Type Title Date
Model - IBIS ZIP 8 KB
Model - IBIS ZIP 8 KB
2 items

Product Options

Applied Filters:

Support

Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Browse FAQs

FAQs

Browse our knowledge base of common questions and answers.
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?

Support Communities

  1. sprintf with float?

    Actually I'm not able to get the correct ouput, formating a float number, not knowing what's going wrong: (no problems when using int, DWORD  and strings) #include void func(void) { char c[25]; float f = 2.5; sprintf(c, "%5.2f", f );. } expected output: "   2 ...

    Aug 26, 2016
  2. How to bring up RZ/T2M SCI/UART (USB serial port: USB Mini-B:CN16)?

    Hi, I have an EVK RZ/T2M board.  To bring up RZ/T2M SCI/UART (USB serial port: USB Mini-B:CN16), I have done the steps below. 1) Installed e² studio tool, FSP packs, GCC toolchain and other necessary tools for a new user via setup ...

    Oct 4, 2022
  3. Smartbond IOT sensor - Accelerometer range

    Hello, Is it possible that i can have acceleration RATE above 100 Hz? Same question for gyroscope. Thanx! Aris

    May 26, 2016
View All Results from Support Communities (15)