Skip to main content
Renesas Electronics Corporation

Features

  • Supports Category 5 cables with attenuation in excess of 24dB at 100MHz.
  • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sublayers functions of IEEE standard
  • 10Base-T and 100Base-TX IEEE 8802.3 compliant
  • Single 3.3V power supply
  • Highly configurable, supports:
    • Media Independent Interface (MII)
    • Auto-negotiation with parallel detection
    • Node applications, managed or unmanaged
    • 10M or 100M full and half-duplex modes
    • Loopback mode for diagnostic functions
    • Auto-MDI/MDIX crossover correction
  • Low-power CMOS (typically 400mW)
  • Power-down mode typically 21mW
  • Clock and crystal supported
  • Fully integrated, DSP-based PMD includes:
    • Adaptive equalization and baseline-wander correction
    • Transmit wave shaping and stream cipher scrambler
    • MLT-3 encoder and NRZ/NRZI encoder
  • Small footprint 48-pin 300mil. SSOP package
  • Also available in a small footprint 56-pin 8mm x 8mm MLF2 package
  • Available in industrial temperature and lead-free

Description

The 1893BF is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards, ISO/IEC 8802-3. This product is intended for MII, node applications that require the Auto-MDIX feature that automatically corrects crossover errors in plant wiring.

The 1893BF incorporates Digital-Signal Processing (DSP) control in its Physical-Medium Dependent (PMD) sublayer. As a result, it can transmit and receive data on Unshielded Twisted-Pair (UTP) Category 5 cables with attenuation in excess of 24dB at 100MHz. With this patented technology, the 1893BF can virtually eliminate errors from killer packets.

The 1893BF provides a Serial-Management Interface for exchanging command and status information with a Station-Management (STA) entity. The 1893BF Media-Dependent Interface (MDI) can be configured to provide either half- or full-duplex operation at data rates of 10Mb/s or 100Mb/s.

Parameters

AttributesValue
Core Voltage (V)3.3
Input Freq (MHz)25 - 25
Temp. Range (°C)-40 to 85°C

Package Options

Pkg. TypePkg. Dimensions (mm)Lead Count (#)Pitch (mm)
SSOP15.9 x 7.5 x 2.3480.64
VFQFPN8.0 x 8.0 x 0.85560.5
Part NumberStatusSamplesStockPackageBudgetary Price (USD)Lead Count (#)Carrier TypeMoisture Sensitivity Level (MSL)Qty. per Reel (#)Qty. per Carrier (#)Package Area (mm²)Pitch (mm)Pkg. Dimensions (mm)Pb (Lead) FreePb Free CategoryTemp. Range (°C)Country of AssemblyCountry of Wafer Fabrication
1893BFILFActiveAvailableIn StockSSOP1ku | $5.2548#Tube3030#119.3mm²0.64mm15.9 x 7.5 x 2.3Yese3 Sn-40 to 85°CTAIWANTAIWAN
1893BFILFTActiveN/AOut of StockSSOP1ku | $5.2548#Reel31000#0119.3mm²0.64mm15.9 x 7.5 x 2.3Yese3 Sn-40 to 85°CTAIWANTAIWAN
1893BKILFActiveAvailableOut of StockVFQFPN1ku | $4.5556#Tray30260#64mm²0.5mm8.0 x 8.0 x 0.85Yese3 Sn-40 to 85°CTHAILANDTAIWAN
1893BKILFTActiveN/AOut of StockVFQFPN1ku | $4.5556#Reel33000#064mm²0.5mm8.0 x 8.0 x 0.85Yese3 Sn-40 to 85°CTHAILANDTAIWAN
1893BFLFObsoleteN/AOut of StockSSOP48#Tube1030#119.3mm²0.64mm15.9 x 7.5 x 2.3Yese3 Sn0 to 70°C
1893BFLFTObsoleteN/AOut of StockSSOP48#Reel31000#0119.3mm²0.64mm15.9 x 7.5 x 2.3Yese3 Sn0 to 70°C
1893BKLFObsoleteN/AOut of StockVFQFPN56#Tray30260#64mm²0.5mm8.0 x 8.0 x 0.85Yese3 Sn0 to 70°C
1893BKLFTObsoleteN/AOut of StockVFQFPN56#Reel33000#064mm²0.5mm8.0 x 8.0 x 0.85Yese3 Sn0 to 70°C
Support Communities

Support Communities

Get quick technical support online from Renesas Engineering Community technical staff.
Browse Articles

Knowledge Base

Browse our knowledge base for helpful articles, FAQs, and other useful resources.
Submit a Ticket

Submit a Ticket

Need to ask a technical question or share confidential information?