Overview
Description
The 1522 is a very high performance monolithic phaselocked loop (PLL) frequency synthesizer. Utilizing ICS's advanced CMOS mixed-mode technology, the 1522 provides a low-cost solution for high-end video clock generation where synchronization to an external video source is required. The 1522 has differential video clock outputs (CLK+ and CLK-) that are compatible with industry standard video DAC. Operating frequencies are fully programmable with direct control provided for reference divider, feedback divider and postscaler.
Features
- Serial programming: Feedback and reference divisors, VCO gain, phase comparator gain, relative phase and test modes.
- Supports high-resolution graphics - Differential CLK out-puts to 230 MHz
- Eliminates need for multiple ECL output voltage controlled crystal oscillators and external components
- Fully-programmable synthesizer capability - not just a clock multiplier
- Line-locked clock generation capability
- 15 - 100 kHz
- External feedback loop capability allows graphics system to be used as the feedback divisor with synchronous switchover to internal feedback
- Small footprint 24-pin SOIC
- Coarse and fine phase adjustment permits precise clocking in video recovery application
Comparison
Applications
Design & Development
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Product Options
Applied Filters:
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
External RAM recommendations
Hi, I use the S5D9 with GUIX and I need more RAM than the internal 640kB for storing GUIX display buffers. Can anybody recommend me the right RAM chip(s) to use as external RAM. At least 8Mbit / 1MbyteCorrect speed, fast enough so that it doesn’t bottleneck the ...
Oct 11, 2019 -
Fresh update to Synergy + e2studio setup_sspv1_7_0_e2s_v7_5_1.exe do not compile any project (even Blinky!)
Hello, After that fresh installation on my new Windows 10 laptop, I've tried with Starter Kit SK-S7G2 both the BSP project compilation and the Blinky project compilation. The Blinky's Build Console shows: Extracting support files...14:38:36 **** Build of configuration Debug for project Blinky ****make -j12 ...
Oct 12, 2019 -
Single Phase Energy meter
Hello All Last month I saw Renesa's new RA series, and I found it is a very good feature. Now I am designing one Single-phase Energy Meter and it also has some control feature as well so I Won't some powerful controller so I was selected RX21A ...
Oct 13, 2019