Microcontroller for motor control enhancing the precision of inverter/converter control
Like the RX62T Group, the high performance (max. 100 MHz) of this microcontroller makes it ideal for motor control. On-chip functions include multifunction timers (MTU3 and GPT) that facilitate motor control, a high-speed 12-bit A/D converter, and a 10-bit A/D converter.
|CPU Core||RX CPU
|Maximum operating frequency||100MHz|
|Power supply voltage||64-pin and under: 2.7 to 3.6V
100-pin and over: 2.7 to 3.6V, 4.0 to 5.5V
|Floating-point processing unit||Single-precision floating-point processing unit
(Supports add /subtract /compare /multiply /divide and other instructions)
|On-chip peripheral functions||
|On-chip debugging function||Yes (with trace function)|
|Low power consumption modes||4 modes
|Packages||PLQP0048KB-A (48-pin LFQFP, 7 x 7mm, 0.5mm pitch)
PLQP0064KB-A (64-pin LFQFP, 10 x 10mm, 0.5mm pitch)
PLQP0100KB-A (100-pin LFQFP, 14 x 14 mm, 0.5 pitch)
PLQP0112JA-A (112-pin LQFP, 20 x 20 mm, 0.65 pitch)
PLQP0120KA-A (120-pin LFQFP, 16 x 16 mm, 0.5 pitch)
PLQP0144KA-A (144-pin LFQFP, 20 x 20 mm, 0.5 pitch)
Pin Count / Memory Size Lineup:
Below you will find information to support the development of your application.
You can find an explanation of orderable part numbers here.
Resources for Software and Hardware
|My Renesas||Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.|
|e-learning||Information for studying and learning about microcontrollers and microprocessors.|
|FAQ||Frequently asked questions and useful hints for development.|
|Forum||A forum and community site to share technical information, questions and opinions with others who use Renesas products.|
|Video||Watch videos related to this product.|
Software Design Support
|CS+||An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)|
|e2studio||Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.|
|E1||A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)|
|Renesas Starter Kit||All the development tools you need for MCU evaluation and getting started. Also recommended for training.|
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.