Overview

Description

This evaluation board kit is ideal for evaluating RZ/A3UL. The RZ/A3UL Evaluation Board Kit consists of a module board (SOM) and a carrier board. The carrier board can be commonly used with RZ/G2UL, RZ/Five and RZ/G2L modules (SOM) prepared according to the SMARC v2.1 standard. This allows you to experience seamless and flexible evaluation between these devices.

Two types of evaluation boards are available: QSPI version and Octal-SPI version. The configuration of each is as follows. Please select the one that best suits your needs.

  • QSPI version:
    • Part Number/ RTK9763U02S01000BE
    • Memory configuration/ QSPI Serial Flash (Boot) + DDR4      
  • Octal-SPI version:
    • Part Number/ RTK9763U02S01001BE
    • Memory configuration/ Octa Flash (Boot) + OctaRAM + DDR4

Features

  • Device: RZ/A3UL
    • Cortex-A55 Single
    • BGA361pin, 13mmSq body, 0.5mm pitch
  • Module Board Function
    • Two types of evaluation boards are available:
      • QSPI version: QSPI Serial Flash (Boot) + DDR4
      • Octal-SPI version: Octa Flash (Boot) + OctaRAM + DDR4
    • DDR4 SDRAM: 1GB × 1pc
    • QSPI flash memory: 128Mb × 1pc "AT25QL128A" (QSPI version)
    • Octa RAM memory: 512Mb × 1pc / Octa flash memory: 1Gb × 1pc (Octal-SPI version)
    • eMMC memory: 64GB × 1pc
    • The microSD card slot is implemented and used as an eSD for boot.
    • 5-output clock oscillator “5P35023” implemented
    • PMIC power supply “DA9062” implemented
  • Carrier Board Function
    • The FFC/FPC connector is mounted as standard for connection to high-speed serial interface for camera module.
    • The Micro-HDMI connector via DSI/HDMI conversion module is mounted as standard for connection to high-speed serial interface for digital video module.
    • The Micro-AB receptacle (ch0: USB2.0 OTG) and A receptacle (ch1: USB2.0 Host) are respectively mounted as standard for connection to USB interface.
    • The RJ45 connector is mounted as standard for software development and evaluation using Ethernet.
    • The audio codec is mounted as standard for advance development of audio system. The audio jack is implemented for connection to audio interface.
    • The CAN connector is implemented for connection to CAN-Bus interface.
    • The Micro-AB receptacles are implemented for connection to asynchronous serial port interface.
    • The microSD card slot and two sockets for PMOD are implemented as an interface for RZ/G2L peripheral functions.
    • For power supply, a mounted USB Type-C receptacle supports the USB PD standard.

Applications

Documentation

Title Type Date
PDF3.93 MB
Manual - Development Tools
PDF6.92 MB
Quick Start Guide
PDF526 KB日本語
Flyer
ZIP5.21 MB
Manual - Development Tools
ZIP1.48 MB
Manual - Software
PDF154 KB
Release Note
PDF200 KB
Release Note

Design & Development

Software & Tools

Software Downloads

Title Type Date
ZIP20.06 MB
Board Description File
ZIP20.67 MB
Board Description File
ZIP20.67 MB
Board Description File

Sample Code

Sample Code

Title Type Date
[Software=FSP|v3.5.0],[Toolchains=GCC ARM A-Profile (AArch64 bere-metal) 10.3-2021.07]
EXE25.57 MB
Application: Industrial, IoT Applications, Consumer Electronics
Function: Software Package
IDE: e2 studio
Sample Code