Features
- Input Offset Voltage: ±2 mV (TYP.)
- Input Offset Current: ±5 nA (TYP.)
- Input Bias Current: 45 nA (TYP.)
- Slew Rate: 0.8 V/μs (TYP.)
- Built-In phase correction circuit
- Built-In Output Short-Circuit Protection
- Standard quad op-amp terminal connection (pin compatible)
Description
µPC452, 3403 are high-performance version of the single-supply op-amp µPC451, 324. Class AB push-pull circuity is employed in the output stage to avoid crossover distortion, and the AC characteristics of this op-amp are also improved. In addition, this single-supply op-amp can operate in both positive and negative power supply and its common-mode input voltage range can also be used from the V-(GND) level. Therefore, this amplifier can be widely used in various application circuit including single-supply AC amplifiers. Depending on operating ambient temperature, µPC452 are suited for communication application while µPC3403 are for general purpose usage.
Parameters
| Attributes | Value |
|---|---|
| Channels (#) | 4 |
| Temp. Range (°C) | -40 to +85, -40 to +85°C |
| Bandwidth (MHz) | 1 |
| Offset Voltage (Max) (mV) | 7 |
| IBIAS (nA) | 45 |
| CMRR (dB) | 90 |
| Rail-to-Rail Input | No |
| Rail-to-Rail Output | No |
| Common Mode Input Voltage Range (V) | 3 - 32 |
| IS per Amp (mA) | 2.8 |
| Single Supply Voltage Range (V) | 3 - 32 |
| Slew Rate (V/µs) | 0.8 |
| VS (Min) (V) | 3 |
| VS (Max) (V) | 32 |
| Topology [Rail 1] | - |
| Enable | - |
| Dual Supply Range (±V) | V+-16V(Max.) |
| Input Offset Voltage Vio (Max) (mV (±)) | 7 |
| Supply Current Icc/Idd (Max) (mA) | 2.8 |
| Qualification Level | Standard |
| Simulation Model Available | SPICE |
Applied Filters:
Loading