Overview
Description
The RRH62000 is an Integrated Sensor Module measuring critical air quality parameters such as particulate matter (PM1, PM2.5, PM10), total volatile organic compounds (TVOC), Indoor Air Quality Index (IAQ), estimated carbon dioxide concentration (eCO2), temperature (T), and relative humidity (RH) are combined in a single package. The RRH62000 provides digital outputs for each sensor, which can be measured simultaneously. A six-pin connector provides an easy plug and play interface.
Features
- Simultaneous multi-sensor measurements of all relevant air quality parameters
- Sensor outputs feature:
- Detection of particle sizes from 0.3µm to 10.0µm
- Output mass concentration bins for PM1, PM2.5, and PM10
- Temperature (T) and Relative Humidity (RH)
- Measurement of Total Volatile Organic Compounds (TVOC) concentrations and indoor air quality (IAQ) index according to UBA
- Estimates carbon dioxide level (eCO2)
- Operating temperature ranges from -10°C to 60°C
- Operating humidity ranges up to 90% RH
- Siloxane resistant
- I2C and UART interfaces
- Outline dimensions: 46.6mm × 34.8mm × 12mm
- Qualified according to JEITA ED-4701
Comparison
Applications
Documentation
|
|
|
|
|---|---|---|
| Type | Title | Date |
| Datasheet | PDF 1.18 MB | |
| End Of Life Notice | PDF 748 KB | |
| Technical Brief | ZIP 16.96 MB | |
| Guide | PDF 588 KB | |
4 items
|
||
Design & Development
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Support Communities
-
RRH62000 status byte
Good morning, I am using the RRH62000 PM sensor and have noticed that, after some time, the sensor status byte changes from 0x0000 to 0x0004. According to the datasheet, this indicates that the "Fan speed is out of the set range." However, other data appear to be read correctly. Could ...
Jan 23, 2025 -
RRH62000 working principle
Hi, I want to ask if there is an official documentation about the specific working principle of RRH62000. For example, it would be interesting to know if the measurements of PM higher then 2.5 (i.e. PM10) are estimated from the number of PM2.5 counted (like other laser ...
Nov 21, 2024 -
RRH62000 sample code files
I download QCIOT-RRH62000POCZ Evaluation Board Manual from RRH62000-EVK - All-in-One Integrated Sensor Module for PM2.5, RHT, TVOC, and eCO2 Detection Evaluation Kit | Renesas.Sample code files are available on the RRH62000 product page，but I could not find them. .
Dec 26, 2024
FAQs
-
RRH62000 - Daughterboard cannot be found
Make sure the interface selection jumper on the daughterboard is removed (set to I2C). The environmental sensor communication board uses I2C communication.
Dec 18, 2024 -
RRH62000 - Power Cycle / Reset
All settings, such as the moving average, are reset to their default values and should be adjusted if necessary. Upon restart, the gas sensor begins a stabilization process, so the initial TVOC readings will be less accurate until warm-up is complete.
Dec 18, 2024 -
RRH62000 - Mounting Direction
The outlet of the sensor module, where the fan is visible, should always be positioned below the inlet to prevent particles from circulating between them. See the design-in guide for more details.
Dec 18, 2024