High-Performance Relative Humidity and Temperature Sensor
Jump to Page Section:
Back to top
Explore ECAD Models
Overview
The HS3001 is a highly-accurate, fully-calibrated relative humidity and temperature sensor. The high accuracy, fast measurement response time, and long-term stability, along with the small package size, makes the HS3001 ideal for a wide number of applications from portable to harsh environments.
An integrated calibration and temperature compensation logic provides fully corrected RH and T values via a standard I²C output. The measured data is internally corrected and compensated for accurate operation over a wide range of temperature and humidity levels–user calibration is not required.
HS3001 - Pinout and Application Circuit
HS300x - ICs (relative)
HS300x - ICs
- RH accuracy: ±1.5% RH typical
- Fast RH response time (typical 6 seconds)
- Temperature sensor accuracy: ±0.2°C typical (-10 to +80°C)
- 14-bit resolution: 0.01% RH (typical)
- Low power consumption: 1.0µA average (one RH+T measurement per second, 8-bit resolution, 1.8V supply)
- Extended supply voltage: 2.3V to 5.5V
Documentation
| Title | Type | Date | |
|---|---|---|---|
PDF404 KB
|
Datasheet
|
||
| Related Files: Sample Code | Application Note
|
||
PDF188 KB Related Files: Sample Code
|
Application Note
|
||
PDF188 KB Related Files: Sample Code
|
Application Note
|
||
PDF190 KB Related Files: Sample Code
|
Application Note
|
||
PDF192 KB Related Files: Sample Code
|
Application Note
|
||
PDF1.34 MB
|
Application Note
|
||
PDF1.54 MB
|
Application Note
|
||
PDF189 KB Related Files: Sample Code
|
Application Note
|
||
PDF76 KB
|
Application Note
|
||
PDF750 KB
|
Overview
|
||
PDF99 KB
|
Product Change Notice
|
||
PDF114 KB
|
Product Change Notice
|
Design & Development
Software & Tool Pages
| Title | Type | Company |
|---|---|---|
| Sensor Software Modules for Renesas MCU PlatformsMiddleware (FIT module and FSP module) and sample software packages that enable control and data acquisition for Renesas sensor products. Downloads: HS300x Sample applicationRX Family OB1203 Sensor Firmware Integration Technology Rev.1.01RX Family OB1203 Sensor Firmware Integration Technology Rev.1.01 - Sample CodeRX Family HS300x Sensor Firmware Integration Technology Rev.1.22RX Family HS300x Sensor Firmware Integration Technology Rev.1.22 - Sample Code |
Sensor | Renesas |
Sample Code
| Title | Type | Date | |
|---|---|---|---|
ZIP2.50 MB Related Files: RL78 Family HS300x Sensor Control Module Software Integration System Rev.1.20Application: Consumer Electronics Compiler: CC-RL, ICCRL78 Function: Serial Peripheral Interface, I2C-bus, RTOS IDE: CS+, e2 studio, IAR EWRL78 |
Sample Code |
||
ZIP2.39 MB Related Files: RX Family HS300x Sensor Firmware Integration Technology Rev.1.22Compiler: CC-RX, GNURX, ICCRX Function: Serial Peripheral Interface, I2C-bus, RTOS, Temperature Sensor IDE: CS+, e2 studio, IAR EWRX |
Sample Code |
||
ZIP2.93 MB Related Files: RX Family OB1203 Sensor Firmware Integration Technology Rev.1.01Compiler: CC-RX, ICCRX, GNURX Function: Serial Peripheral Interface, Temperature Sensor, I2C-bus, RTOS IDE: e2 studio, IAR EWRX |
Sample Code |
||
ZIP2.00 MB Related Files: RL78 Family Sensor I2C Communication Middleware Control Module Software Integration System Rev.1.10 |
Sample Code |
Boards & Kits
Relative Humidity Sensor Evaluation Kit
The SDAH01 evaluation kit is used to assess the HS300x high performance humidity and temperature sensor chip. The hardware allows users to carry out data logging experiments, and can communicate with the Renesas software on a PC through a standard USB interface. This software makes it possible to view measurements in real-time, adjust the resolution of the sensor, configure measurement parameters, and download previously logged measurements.
Featured Documents:
Portable Relative Humidity and Temperature Sensing System
IDT’s SDAH02 LCD evaluation board allows for easy monitoring of the ambient relative humidity and temperature. The system combines the HS300x relative humidity and temperature sensor with an LCD display for fast and accurate environmental measurements. The system takes a measurement every second, and is powered by a CR1632 battery (included). The sensing system’s LCD can also provide plots of relative humidity or temperature vs. time.
Featured Documents:
Relative Humidity Sensor Pmod™ Board (Renesas Quick-Connect IoT)
The US082-HS3001EVZ board enables quick prototyping for a custom system design with the HS3001, a high-performance relative humidity and temperature sensor.
Featured Documents:
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
Product Options
Support
play_circle_filledVideos & Training
Long Lasting Battery-Driven Air Quality Monitoring
Extend battery life significantly with the combination of Renesas’ ultra-low power RE01 MCU and ZMOD sensors
Video List
