特長
- Meets All RS-232E and V.28 Specifications
- Requires Only Single +5V Power Supply
- (+5V and +12V - HIN239)
- High Data Rate120kbps
- Onboard Voltage Doubler/Inverter
- Low Power Consumption
- Low Power Shutdown Function
- Three-State TTL/CMOS Receiver Outputs
- Multiple Drivers
- ±10V Output Swing for 5V Input
- 300Ω Power-Off Source Impedance
- Output Current Limiting
- TTL/CMOS Compatible
- 30V/µs Maximum Slew Rate
- Multiple Receivers
- ±30V Input Voltage Range
- 3kΩ to 7kΩ Input Impedance
- 0.5V Hysteresis to Improve Noise Rejection
- Pb-Free Plus Anneal Available (RoHS Compliant)
説明
The HIN232-HIN241 family of RS-232 transmitters/receivers interface circuits meet all ElA RS-232E and V. 28 specifications, and are particularly suited for those applications where ±12V is not available. They require a single +5V power supply (except HIN239) and feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The family of devices offer a wide variety of RS-232 transmitter/receiver combinations to accommodate various applications. The drivers feature true TTL/CMOS input compatibility, slewrate- limited output, and 300Ω power-off source impedance. The receivers can handle up to ±30V, and have a 3kΩ to 7kΩ input impedance. The receivers also feature hysteresis to greatly improve noise rejection.
パラメータ
| 属性 | 値 |
|---|---|
| Temp. Range (°C) | -40 to +85°C, 0 to +70°C |
| Charge-pump Capacitance Value (µF) | 1 |
アプリケーション
- Any system requiring high-speed RS-232 communications port
- Computer - portable, mainframe, laptop
- Peripheral - printers and terminals
- Instrumentation
- Modems
| Part Number | Status | Samples | Stock | RoHS | Package | Budgetary Price (USD) | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Pitch (mm) | Pkg. Dimensions (mm) | Pb (Lead) Free | Pb Free Category | Temp. Range (°C) | Country of Assembly | Country of Wafer Fabrication |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HIN232CBZ | Active | Available | In Stock | RoHS:EN | SOICW | 1ku | $0.49 | 16# | Tube | 2 | 1.3mm | 10.3 x 7.5 x 0.20 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | 0 to +70°C | PHILIPPINES, CHINA | USA |
| HIN232CBZ-T | Active | N/A | In Stock | RoHS:EN | SOICW | 1ku | $0.49 | 16# | Reel | 2 | 1.3mm | 10.3 x 7.5 x 0.20 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | 0 to +70°C | PHILIPPINES, CHINA | USA |
| HIN232CPZ | Active | Available | In Stock | RoHS:EN | PDIP | 1ku | $0.54 | 16# | Tube | Not Applicable | 2.5mm | 19.0 x 6.6 x 3.94 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | 0 to +70°C | MALAYSIA, TAIWAN, PHILIPPINES | USA |
| HIN232IBZ | Active | Available | In Stock | RoHS:EN | SOICW | 1ku | $0.45 | 16# | Tube | 2 | 1.3mm | 10.3 x 7.5 x 0.20 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | -40 to +85°C | CHINA, PHILIPPINES, CHINA | USA |
| HIN232IBZ-T | Active | N/A | In Stock | RoHS:EN | SOICW | 1ku | $0.45 | 16# | Reel | 2 | 1.3mm | 10.3 x 7.5 x 0.20 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | -40 to +85°C | CHINA, PHILIPPINES, CHINA | USA |
| HIN232IPZ | Obsolete | N/A | In Stock | RoHS:EN | PDIP | 16# | Tube | Not Applicable | 2.5mm | 19.0 x 6.6 x 3.94 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | -40 to +85°C |
- トレーニング英語PDF 719 KB R15TB0008EU0100 Rev.1.00 2023年12月18日
- トレーニング英語PDF 762 KB R15TB0007EU0100 Rev.1.00 2023年12月04日
- トレーニング英語PDF 208 KB R15TB0004EU0100 Rev.1.00 2023年10月26日
- トレーニング英語PDF 405 KB R15TB0003EU0100 Rev.1.00 2023年6月26日
- トレーニング英語PDF 239 KB R15TB0002EU0100 Rev.1.00 2023年6月21日
- アプリケーションノート英語PDF 365 KB AN1978 2023年4月12日AI生成コンテンツ: The document details surge protection circuits for RS-485 transceivers, focusing on Level 4 (4kV) protection using gas discharge tubes (GDTs) for higher overvoltage and overcurrent tolerance. It compares protection schemes by component count, board area, and cost, highlighting that higher-level protection increases complexity and expense. The BOMs for Level 3 and Level 4 circuits list components such as transceivers, bidirectional TVS diodes, transient blocking units, thyristors or GDTs, and resistors. The GDT switching characteristic explains how it diverts transient currents to ground by transitioning from high impedance to a crowbar current path. Simpler protection can be achieved with overvoltage protected transceivers.
- アプリケーションノート英語PDF 207 KB an1985 2022年8月19日AI生成コンテンツ: Transient protection for RS-485 transceivers involves careful TVS diode design to prevent damage from high surge currents. Internal ESD structures in the ISL3152E share transient current with external TVS diodes, risking damage without current-limiting resistors. Using thick-film resistors under 200 ohms between TVS and transceiver limits surge current while minimizing bus voltage attenuation. Recommended PCB layout includes low-inductance ground and Vcc planes, 0603 resistors for wave or reflow soldering, and proper component placement to reduce inductance and enhance protection.
- アプリケーションノート英語PDF 474 KB AN1979 2022年8月16日AI生成コンテンツ: The document explains surge protection using Renesas’ Overvoltage Protected (OVP) transceivers with various protection schemes. It details the use of TVS diodes and thyristors to protect data lines against surge currents while maintaining low capacitance for high data rates. Different configurations address various common-mode voltage ranges and surge levels, ensuring compliance with IEC61000-4-5 standards. The paper includes calculations for peak protection voltages and discusses device characteristics and combinations for robust surge protection in industrial applications.
- 技術概要英語PDF 188 KB R70TB0002EU0100 Rev.1.00 2022年5月17日
- アプリケーションノート英語PDF 178 KB r15an0002eu-rs-485-transient-protection 2019年10月28日
- ホワイトペーパー英語Industrial PC designs increasingly demand compact form factors and flexible communication interfaces. This paper explores how modern dual-protocol transceivers support both RS-232 and RS-485 standards while offering high integration and advanced configuration options. It also presents application examples that illustrate their versatility in industrial systems.
- アプリケーションノート英語PDF 395 KB an1992 2018年3月08日AI生成コンテンツ: The document explains isolating RS-232 interfaces using high-speed digital optocouplers, focusing on minimizing output glitches caused by leakage capacitances. It recommends balancing common-mode impedance with two current setting resistors for improved common-mode rejection. The PS9121 optocoupler supports 3.75kV isolation and up to 15Mbps data rate, paired with the ICL3221 RS-232 transceiver operating at 250kbps. It details calculating resistor values for LED current and pull-up resistors to optimize performance and reduce power consumption. Signal waveforms demonstrate the isolated interface operation.
- アプリケーションノート英語PDF 513 KB an1991 2018年3月06日AI生成コンテンツ: The document explains the design of LED drive circuits for high-speed digital optocouplers in RS-485 interfaces, focusing on common-mode rejection (CMR) improvement by balancing impedance with two resistors. It details an isolated RS-485 interface using PS9924 optocouplers and ISL3155 transceivers, highlighting dominant/recessive mode operation and bus arbitration. It provides calculations for current setting resistors and collector resistors to optimize performance, minimize propagation delay, and reduce pulse width distortion for reliable data transmission up to 10Mbps.
- データシート英語PDF 1.18 MB hin232-36-37-38-39-40-41 2000年4月06日
推奨ドキュメント (1)
- データシート英語PDF 1.18 MB hin232-36-37-38-39-40-41 2000年4月06日
データシート (1)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
- アプリケーションノート英語PDF 365 KB AN1978 2023年4月12日AI生成コンテンツ: The document details surge protection circuits for RS-485 transceivers, focusing on Level 4 (4kV) protection using gas discharge tubes (GDTs) for higher overvoltage and overcurrent tolerance. It compares protection schemes by component count, board area, and cost, highlighting that higher-level protection increases complexity and expense. The BOMs for Level 3 and Level 4 circuits list components such as transceivers, bidirectional TVS diodes, transient blocking units, thyristors or GDTs, and resistors. The GDT switching characteristic explains how it diverts transient currents to ground by transitioning from high impedance to a crowbar current path. Simpler protection can be achieved with overvoltage protected transceivers.
- アプリケーションノート英語PDF 207 KB an1985 2022年8月19日AI生成コンテンツ: Transient protection for RS-485 transceivers involves careful TVS diode design to prevent damage from high surge currents. Internal ESD structures in the ISL3152E share transient current with external TVS diodes, risking damage without current-limiting resistors. Using thick-film resistors under 200 ohms between TVS and transceiver limits surge current while minimizing bus voltage attenuation. Recommended PCB layout includes low-inductance ground and Vcc planes, 0603 resistors for wave or reflow soldering, and proper component placement to reduce inductance and enhance protection.
- アプリケーションノート英語PDF 474 KB AN1979 2022年8月16日AI生成コンテンツ: The document explains surge protection using Renesas’ Overvoltage Protected (OVP) transceivers with various protection schemes. It details the use of TVS diodes and thyristors to protect data lines against surge currents while maintaining low capacitance for high data rates. Different configurations address various common-mode voltage ranges and surge levels, ensuring compliance with IEC61000-4-5 standards. The paper includes calculations for peak protection voltages and discusses device characteristics and combinations for robust surge protection in industrial applications.
- アプリケーションノート英語PDF 178 KB r15an0002eu-rs-485-transient-protection 2019年10月28日
- ホワイトペーパー英語Industrial PC designs increasingly demand compact form factors and flexible communication interfaces. This paper explores how modern dual-protocol transceivers support both RS-232 and RS-485 standards while offering high integration and advanced configuration options. It also presents application examples that illustrate their versatility in industrial systems.もっと見る (13)
アプリケーションノート、ホワイトペーパー (13)
- 製品変更通知英語PDF 98 KB PCN12094 2012年12月19日
- 製品変更通知英語PDF 86 KB PCN12086 2012年10月24日
製品通知(PCN、EOLなど) (3)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
- トレーニング英語PDF 719 KB R15TB0008EU0100 Rev.1.00 2023年12月18日
- トレーニング英語PDF 762 KB R15TB0007EU0100 Rev.1.00 2023年12月04日
- トレーニング英語PDF 208 KB R15TB0004EU0100 Rev.1.00 2023年10月26日
マーケティング資料 (7)
- 技術概要英語PDF 188 KB R70TB0002EU0100 Rev.1.00 2022年5月17日
その他資料 (1)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。