特長
- Fully differential inputs, outputs, and feedback
- Differential input range ±2.3V
- 700MHz 3dB bandwidth
- 1000V/μs slew rate
- Low distortion at 5MHz and 20MHz
- Single 5V or dual ±5V supplies
- 60mA maximum output current
- Low power - 12.5mA per channel
- Pb-free (RoHS compliant)
説明
The EL5178 and EL5378 are single and triple high bandwidth amplifiers with an output in differential form. They are primarily targeted for applications such as driving twisted-pair lines in component video applications. The inputs can be in either single-ended or differential form but the outputs are always in differential form. On the EL5178 and EL5378, two feedback inputs provide the user with the ability to set the gain of each device (stable at minimum gain of 2). The output common mode level for each channel is set by the associated REF pin, which has a -3dB bandwidth of over 110MHz. Generally, these pins are grounded but can be tied to any voltage reference. All outputs are short-circuit protected to withstand temporary overload condition. The EL5178 is available in 8 Ld MSOP and SOIC packages and EL5378 is available in a 28 Ld QSOP package. All are specified for operation over the full -40°C to +85°C temperature range.
アプリケーション
- Twisted-pair driver
- Differential line driver
- VGA over twisted-pair
- ADSL/HDSL driver
- Single-ended to differential amplification
- Transmission of analog signals in a noisy environment
| Part Number | Status | Samples | Stock | RoHS | Package | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Pb (Lead) Free | Pb Free Category | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| EL5378IUZ | Obsolete | N/A | In Stock | RoHS:EN | QSOP | 28# | Tube | 3 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | -40 to +85°C |
| EL5378IUZ-T13 | Obsolete | N/A | Out of Stock | RoHS:EN | QSOP | 28# | Reel | 3 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | -40 to +85°C |
| EL5378IUZ-T7 | Obsolete | N/A | Out of Stock | RoHS:EN | QSOP | 28# | Reel | 3 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | -40 to +85°C |
- アプリケーションノート英語PDF 263 KB r13an0003eu0100-biasing-op-amps 2019年12月06日AI生成コンテンツ: Proper biasing of operational amplifiers is essential to avoid malfunction in AC-coupled circuits. A missing DC bias path causes long stabilization times and potential failures. Adding input resistors to ground provides a DC path for bias currents, minimizing offset errors. For single-supply AC-coupled amplifiers, biasing uses a reference voltage, ideally from a high-PSRR voltage reference or buffered voltage divider, to maintain signal symmetry and reduce noise. Understanding frequency responses of input and feedback components is crucial for setting bandwidth and gain characteristics.
- アプリケーションノート英語PDF 564 KB an1993 2018年5月22日AI生成コンテンツ: Voltage feedback (VFB) amplifiers use a differential input pair, a high-impedance stage, and an output buffer to convert input voltage differences into output voltage. The VFB amplifier's gain decreases at a dominant pole frequency due to compensation capacitors. Current feedback (CFB) amplifiers include a class AB input amplifier, current mirror, high-impedance stage, and output buffer. CFB amplifiers provide faster switching and higher slew rates by drawing charge/discharge currents directly from supply rails, unlike VFB amplifiers which are limited by biasing current sources.
- 製品変更通知英語PDF 135 KB PCN12084 2012年10月15日
- アプリケーションノート英語PDF 957 KB an1484 2007年11月29日AI生成コンテンツ: The document explains extending KVM video range up to 1,500 feet using peaking circuits to compensate for Cat 5 cable losses. It details low-frequency and high-frequency gain adjustments, input impedance matching, sync extraction with offset adjustment, and limiting high-frequency boost to prevent oscillations. A selectable peaking network optimizes video signal quality for different cable lengths (150ft, 300ft, 450ft). The design includes RGB+HVsync extension using digital encoding and offset scaling for sync signals.
- アプリケーションノート日本語PDF 447 KB G13689JJ4V0AN00 2006年7月01日AI生成コンテンツ: 本資料は、単一5V電源で動作するオペアンプの使用方法を説明し、デジタルICとのインターフェースでの利用が増加していることを示しています。各種単電源オペアンプの特徴比較や品種選定のポイント、使用上の注意事項を解説しています。また、ルネサス製品の品質水準分類と安全設計の重要性についても述べています。
- アプリケーションノート日本語PDF 354 KB G13257JJ5V0AN00 2006年7月01日AI生成コンテンツ: 本資料はNECのJ-FET入力オペアンプシリーズについて説明し、低ノイズ、低電圧・低消費電力、高精度・高安定タイプなど5種類22製品を紹介しています。SOPや9ピンスリムSTPなど多様なパッケージにより幅広い用途に対応可能です。製品の品質水準(標準、特別、特定)や安全設計、知的財産権に関する注意事項も記載されています。
- アプリケーションノート英語PDF 357 KB an1694 2004年1月19日AI生成コンテンツ: The document outlines the four fundamental internal blocks of an operational amplifier and presents a simple 2:1 stage circuit diagram. It includes important legal notices from Renesas Electronics regarding the use, liability, and intellectual property rights of their semiconductor products. The document clarifies product quality grades, intended applications, and restrictions on use in life-critical or hazardous systems. It emphasizes compliance with applicable laws and safety responsibilities when using Renesas products. Contact information for Renesas sales offices worldwide is also provided.
- アプリケーションノート英語PDF 843 KB an535 2002年6月05日AI生成コンテンツ: A Data Acquisition System (DAS) requires careful design of signal conditioning, transducer selection, and signal transmission to ensure high accuracy. Signal conditioning includes multiplexing, amplification, filtering, and calibration, ideally performed near the transducer. Transducers convert physical variables to electrical signals, often voltage, with low source resistance preferred. Signal paths can be single-ended or differential; differential paths better reject common mode noise, especially for low-level signals. Shielded twisted pairs and balanced lines reduce interference. Filters, typically Butterworth low-pass, prevent aliasing and maintain signal integrity.
推奨ドキュメント (1)
データシート (1)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
- アプリケーションノート英語PDF 263 KB r13an0003eu0100-biasing-op-amps 2019年12月06日AI生成コンテンツ: Proper biasing of operational amplifiers is essential to avoid malfunction in AC-coupled circuits. A missing DC bias path causes long stabilization times and potential failures. Adding input resistors to ground provides a DC path for bias currents, minimizing offset errors. For single-supply AC-coupled amplifiers, biasing uses a reference voltage, ideally from a high-PSRR voltage reference or buffered voltage divider, to maintain signal symmetry and reduce noise. Understanding frequency responses of input and feedback components is crucial for setting bandwidth and gain characteristics.
- アプリケーションノート英語PDF 564 KB an1993 2018年5月22日AI生成コンテンツ: Voltage feedback (VFB) amplifiers use a differential input pair, a high-impedance stage, and an output buffer to convert input voltage differences into output voltage. The VFB amplifier's gain decreases at a dominant pole frequency due to compensation capacitors. Current feedback (CFB) amplifiers include a class AB input amplifier, current mirror, high-impedance stage, and output buffer. CFB amplifiers provide faster switching and higher slew rates by drawing charge/discharge currents directly from supply rails, unlike VFB amplifiers which are limited by biasing current sources.
- アプリケーションノート英語PDF 957 KB an1484 2007年11月29日AI生成コンテンツ: The document explains extending KVM video range up to 1,500 feet using peaking circuits to compensate for Cat 5 cable losses. It details low-frequency and high-frequency gain adjustments, input impedance matching, sync extraction with offset adjustment, and limiting high-frequency boost to prevent oscillations. A selectable peaking network optimizes video signal quality for different cable lengths (150ft, 300ft, 450ft). The design includes RGB+HVsync extension using digital encoding and offset scaling for sync signals.
- アプリケーションノート日本語PDF 447 KB G13689JJ4V0AN00 2006年7月01日AI生成コンテンツ: 本資料は、単一5V電源で動作するオペアンプの使用方法を説明し、デジタルICとのインターフェースでの利用が増加していることを示しています。各種単電源オペアンプの特徴比較や品種選定のポイント、使用上の注意事項を解説しています。また、ルネサス製品の品質水準分類と安全設計の重要性についても述べています。
- アプリケーションノート日本語PDF 354 KB G13257JJ5V0AN00 2006年7月01日AI生成コンテンツ: 本資料はNECのJ-FET入力オペアンプシリーズについて説明し、低ノイズ、低電圧・低消費電力、高精度・高安定タイプなど5種類22製品を紹介しています。SOPや9ピンスリムSTPなど多様なパッケージにより幅広い用途に対応可能です。製品の品質水準(標準、特別、特定)や安全設計、知的財産権に関する注意事項も記載されています。もっと見る (7)
アプリケーションノート、ホワイトペーパー (7)
- 製品変更通知英語PDF 135 KB PCN12084 2012年10月15日
製品通知(PCN、EOLなど) (2)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
マーケティング資料 (1)
その他資料 (4)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。