特長
- 0.3ps RMS typical jitter (including spurs), 12kHz to 20MHz
- Operating modes: locked to input signal and free-run
- Digitally Controlled Oscillator (DCO) mode for software adjustment of operating frequency
- Operates from a 10MHz to 40MHz fundamental-mode crystal
- Accepts one LVPECL, LVDS, LVHSTL, HCSL, or LVCMOS input clock
- Accepts frequencies ranging from 10MHz up to 600MHz
- Clock input monitoring
- Generates 12 LVPEC/LVDS/HCSL or 24 LVCMOS output clocks
- Output frequencies ranging from 8kHz up to 1.0GHz (diff)
- Output frequencies ranging from 8kHz up to 250MHz (LVCMOS)
- Two Output Enable control inputs
- Lock and Loss-of-Signal status outputs
- Programmable output de-skew adjustments in steps as small as 16ps
- Register programmable through I²C or via external I²C EEPROM
- Bypass clock paths and reference output for system tests
- -40 °C to +85 °C ambient operating temperature
- Packaged in a 72-pin QFN, lead-free RoHS (6)
- Supported by Renesas' Timing Commander Software
説明
The 8T49N1012 has one fractional-feedback PLL that can be used for frequency synthesis. It is equipped with two integer and eight fractional output dividers, allowing the generation of up to ten different output frequencies, ranging from 8kHz to 1GHz. Eight of these frequencies are completely independent of each other and the inputs. Two more are related frequencies. The twelve outputs may select among LVPECL, LVDS, HSCL, or LVCMOS output levels.
This functionality makes it ideal to be used in any frequency synthesis application, including 1G, 10G, 40G, and 100G Synchronous Ethernet, OTN, and SONET/SDH, including ITU-T G.709 (2009) FEC rates. The device supports Output Enable inputs and Lock and LOS status outputs.
カスタムプログラムユーティリティをお試しください。
アプリケーション
- OTN or SONET/SDH equipment line cards (up to OC-192, and supporting FEC ratios)
- Gigabit and Terabit IP switches/routers
- Wireless base station baseband
- Data communications
カスタムプログラムユーティリティをお試しください。
| Part Number | Status | Samples | Stock | Package | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Qty. per Reel (#) | Qty. per Carrier (#) | Pb (Lead) Free | Pb Free Category | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8T49N1012-998NLGI | Obsolete | N/A | In Stock | VFQFPN | 72# | Tray | 3 | 0 | 168# | Yes | e3 Sn | -40 to 85°C |
| 8T49N1012-998NLGI8 | Obsolete | N/A | Out of Stock | VFQFPN | 72# | Reel | 3 | 2500# | 0 | Yes | e3 Sn | -40 to 85°C |
- アプリケーションノート英語PDF 187 KB R31AN0065EU0101 Rev.1.01 2023年11月14日
- アプリケーションノート英語PDF 157 KB R31AN0020EU0100 Rev.1.00 2022年5月16日AI生成コンテンツ: EEPROM read errors on UFT3G devices occur when the SDA line's rising edge is slowed beyond 136ns due to extra loading from devices like LEDs or I2C extenders. To ensure reliable EEPROM access, adjust the pull-up resistor on the SDA line so the voltage rises from 0 to 1.8V in less than 136ns, while maintaining a low enough voltage (below 0.4V) when driven low. A 1kΩ pull-up resistor is a recommended starting point. These guidelines optimize I2C bus performance and prevent EEPROM read halts.
- アプリケーションノート英語PDF 415 KB 2020年7月17日AI生成コンテンツ: Timing considerations are critical when writing to UFT3G devices via I2C or SPI, especially regarding idle times between writes to ensure successful communication. Single-byte and block write sequences are supported, with specific idle time recommendations depending on whether PLL feedback dividers or DSM_ORD registers are modified. Calibration times vary based on crystal frequency and DLCNT settings. System implementation guidelines include disabling/enabling DPLL calibration and managing I2C wait times to avoid data corruption during frequency recalibration.
- 製品変更通知英語PDF 163 KB 2020年5月20日
- アプリケーションノート英語
- アプリケーションノート英語PDF 170 KB 7WDXRDKU4E7E-5-57318 2014年5月13日
推奨ドキュメント (1)
データシート (1)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
- アプリケーションノート英語PDF 187 KB R31AN0065EU0101 Rev.1.01 2023年11月14日
- アプリケーションノート英語PDF 157 KB R31AN0020EU0100 Rev.1.00 2022年5月16日AI生成コンテンツ: EEPROM read errors on UFT3G devices occur when the SDA line's rising edge is slowed beyond 136ns due to extra loading from devices like LEDs or I2C extenders. To ensure reliable EEPROM access, adjust the pull-up resistor on the SDA line so the voltage rises from 0 to 1.8V in less than 136ns, while maintaining a low enough voltage (below 0.4V) when driven low. A 1kΩ pull-up resistor is a recommended starting point. These guidelines optimize I2C bus performance and prevent EEPROM read halts.
- アプリケーションノート英語PDF 1.99 MB 7WDXRDKU4E7E-5-57242 2022年3月01日もっと見る (27)
アプリケーションノート、ホワイトペーパー (27)
- 製品変更通知英語PDF 163 KB 2020年5月20日
- 製品変更通知英語PDF 454 KB 2019年2月08日もっと見る (7)
製品通知(PCN、EOLなど) (7)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
図、設計ファイル (1)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
- 概要英語PDF 1.62 MB R31DS0106EU0000-7WDXRDKU4E7E-6-9407 Rev.0.00 2021年12月16日
- 製品概要英語PDF 631 KB 7WDXRDKU4E7E-6-11303 2016年5月02日
マーケティング資料 (2)
- 技術概要英語PDF 238 KB 7WDXRDKU4E7E-6-11137 2016年2月08日
その他資料 (1)
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
No Results Found.
入力するワードを減らしてみたり、異なるワード、あるいはより一般的なワードを入力してみましょう。
フィルターを適用している場合、フィルターの範囲を見直してみてより広く検索結果が反映される様にしてみましょう。
- ナレッジベースを検索してみましょう。FAQにより、お客様をサポートいたします。
- ルネサスの技術スタッフやコミュニティからのヘルプをサポートフォーラムから受けられます。
Renesas Boards & Kits
Evaluation Kit for 8T49N1012
The EVK-8T49N1012 evaluation board kit is a platform that is designed to help the customer evaluate Renesas's 8T49N1012 FemtoClockR NG 12-output Frequency Synthesizer. When the board is connected to a PC running Renesas' Timing CommanderTM software through USB, the device can be configured and... 続きを読む